Download Operating Instructions DMP 96 A

DOLD GMBH
Operating instructions DMP 96 A
5.2 Lower 7-segment display
shows:
•
•
•
setpoint
parameter value in entry mode
alternation between " -y- " / manipulated variable when actuator function is activated (manual function)
alternation between setpoint (auxiliary setpoint) / "Opt" during the self-optimization procedure.
•
5.3 LED's:
LED:
LED:
LED:
LED:
6.
K1
K2
1
2
yellow
yellow
green
green
lights up when output K 1 is active
lights up when output K 2 is active
lights up when continuous-action controller is functioning
lights up when logic input is activated (contact closed)
Explanations of symbols:
Display:
Meaning:
"P.nr"
"SP.1"
"SP.2"
" -y- "
"Cod"
"Con"
"Cor"
"rA.H"
"rA.L"
"Co.1"
"Co.2"
"Fd.1"
"Fd.2"
"rES"
"Aut"
"Co.u"
"Co.A"
"An.H"
"An.L"
"Co.L"
"3-P"
"uSr"
"PAr"
"Pb.1"
"ti.1"
"td.1"
"CY.1"
"HY.1"
"bd.1"
"LA.2"
"Lr.2"
"bd.2"
"HY.2"
Current program number
Setpoint 1
Setpoint 2
Manipulated actuator value
Code entry
Enter configuration level
Line compensation or zero-point offset
Set upper limit of setpoint range
Set lower limit of setpoint range
Configuration, relay contact K 1
Configuration, relay contact K 2
fault on control output K 1
fault on control output K 2
Display resolution
Configuration of automatic function
Configuration of setpoint setting
Configuration of analog input
Setting of upper measuring range limit for actual-value output
Setting of lower measuring range limit for actual-value output
Configuration of logic input
Configuration of three-point response
Enter setpoint entry level
Enter parameterization level
Proportional band, control contact K 1
Reset time, control contact K 1
Derivative action time, control contact K 1
Cycle time, control contact K 1
Switching hysteresis, control contact K 1
Symmetrical. spreading, limit comparator K 1
Absolute setpoint value, limit-value contact K 2
Relative setpoint value, limit-value contact K 2
Symmetrical. spreading, limit comparator K 2
Switching hysteresis, limit-value contact K 2
DMP 96 A
H0e020bA4.doc
Version:
020
Edition: 07.11.2006
Number of pages: 26
12