Download Operating Instructions

PSG Plastic Service GmbH
Operating instructions profiTEMP with control panel DU
888 - In the defined testing period see [P028] MoldCheck
max. wait time no temperature rise happened.
Alarm LED sensor alarm
See General displays
General displays
OK
For the zone (here 1) the check was executed and no errors
found.
Not checked.
For the zone (here 1) the check was not executed.
Check aborted.
For the zone (here 1) the check was aborted. The alarm
LED's show the errors already detected before abort. In the
lower green LED display the error reason is displayed.
Save on USB stick.
Before calling save / load on / from USB stick by key, the
USB stick must be connected to the USB connection, otherwise the menu items, related to USB stick, are not displayed.
The MoldCheck result can be saved on USB stick.
Rev. 1.01.00
Technical changes reserved
47