Download Palram 701950 Use and Care Manual
Transcript
A I M ssembly Instructions nstructions de montage ontageanleitung Grow&Store - 6’x12’ 366x185x209cm / 144"x72¾"x82¼" Email: [email protected] I www.palramapplications.com EN a IMPORTANT Please read these instructions carefully before you start to assemble this greenhouse. Keep these instructions in a safe place for future reference. a Customer Service For assistance with assembly or for replacement parts – please log onto our website or call our service line (number is on the title page). Additional information can be found at our website: www.palramapplications.com a Safety Advice • It is of utmost importance to assemble all of the parts according to the directions. Do not skip any step. • We strongly recommend using work gloves during assembly. • Always wear shoes and safety goggles when working with extruded aluminium. • If using a step ladder or power tools ensure that you follow the manufacturer’s safety advice. • Do not touch overhead power cables with the aluminium profiles. • Do not attempt to assemble the greenhouse in windy or wet conditions. • Dispose of all plastic bags safely keep them out of reach of small children. • Keep children away from the assembly area. • Do not lean against or push the greenhouse during construction. • Do not position your greenhouse in an area exposed to excessive wind. • Do not attempt to assemble this greenhouse if you are tired, have taken drugs or alcohol or if you are prone to dizzy spell. • Hot items such as recently used grills, blowtorches etc. must not be stored in the Before Assembly This is a multi-part assembly best achieved by two people. Allow at least half a day for assembly process. Selecting a site - the greenhouse must be , positioned and fixed on a flat level surface. Choose a sunny position away from overhanging trees. We are strongly recomend to fix your greenhouse directly to a solid concrete foundation. When doing that use the pre drilled holes in the metal base supplied. Take out all components parts of the packages. Sort the parts and check against the contents parts list. During assembly parts should be laid out close at hand. Keep all small parts (screws etc.) in a bowl so they do not get lost. In purpose to facilitate parts’ identification and assembly process, all-positioned profiles are used in this greenhouse. As a result some apertures in the profiles are not used during assembly. a During Assembly Carry out the assembly steps in the order set out in the instructions. Step 1: Make sure the base is square by measuring the diagonals and level by using a spirit level. Steps 8, 9, 12: The oval hole in the crossbars A256 should always be assembled to the base of the greenhouse. Door assembly (Steps 7, 56-63) Door can be installed as a left hand door or right hand door to your decision. These instructions show a right hand door assembly. Step 7: determines door direction door post 987 is where door hinges will be located. Steps 56-63: Door assembly should be done according to this decision. Steps 41: Decide on the window’s location before assembly. Window can be installed in one of the indicated options. Step 65: Firmly connect the greenhouse to a level final position immediately after completion of the assembly. greenhouse. Ensure there are no hidden pipes or cables in the ground before inserting the pegs. This product is designed to use as greenhouse only. • a Care & Maintenance When your greenhouse needs to be cleaned, use a mild detergent solution and rinse with cold clean water. DO NOT use acetone, abrasive cleaners or other special detergents to clean the clear panels. It is recommended to check periodically that roof panels caps (plastic part 329 & profile 981) are set in place. a Tools & Equipment • Tape measure • Work gloves • Lubricant • Phillips head screwdriver • Step ladder • Drill bit • Large hammer • Spanner • T001 - Special tool for Screws 411 and nuts 412 • Screws 411 and nuts 412 are used throughout the assembly process. • Screws 411 are to be assembled from the outside and nuts 412 from the inside of the greenhouse. • If not specified otherwise, do not fasten screws and nuts (411 & 412) more than 2-3 turns • only. Do not tighten them until completion of the panels’ assembly. These 2 icons indicate if screws’ tightening is required or not. However, in some steps, temporary tightening of a few screws may be needed to prevent a profile from falling till it will be fully connected in the next steps. FR IMPORTANT ! Veuillez lire attentivement ces instructions avant de commencer à monter votre serre. Conservez ces instructions en lieu sûr pour toute consultation ultérieure. a Service clientèle Pour toute assistance concernant le montage de la serre ou ses pièces de rechange – veuillez consulter notre site Internet ou appeler notre service technique (dont le numéro de téléphone figure sur la couverture de la brochure). Pour en savoir plus, n’hésitez pas à visiter notre site Internet : www.palramapplications.com a Consignes de sécurité • Très important ! Veuillez suivre scrupuleusement les instructions de cette brochure et réaliser les étapes dans l’ordre énoncé. • Nous recommandons vivement le port de gants de protection pendant le montage. • Portez toujours des chaussures de travail et des lunettes de protectrion lorsque vous travaillez des pièces en aluminium extrudé. • Lors de l’utilisation d’une échelle ou d’outils électriques, assurez-vous de bien suivre les consignes de sécurité du fabricant. • Veillez à ne pas toucher de câbles aériens avec les profilés en aluminium. • N’essayez pas de monter la serre s’il y a du vent ou s’il fait humide. • Jetez tous les sacs en plastique en appliquant les règles de sécurité et maintenez-les hors de portée des jeunes enfants. • Eloignez les enfants de la zone d’assemblage. • Ne vous appuyez pas contre la serre et ne la poussez pas pendant le montage. • Ne positionnez pas la serre dans un endroit trop exposé au vent. • N’essayez pas de monter la serre si vous êtes fatigué, si vous êtes sous l’effet de drogues, de médicaments ou d’alcool ou encore si vous êtes sujet aux vertiges. • Les objets chauds tels qu’un barbecue, un chalumeau ou autre article ayant été récemment utilisés, ne doivent pas être rangés dans la serre. • Avant de planter les piquets, assurez-vous qu’aucun tuyau ni câble n’est enterré à l’endroit sélectionné pour l’installation. • Ce produit est conçu pour servir de serre exclusivement. a Entretien & Maintenance Pour nettoyer votre serre, utilisez une solution détergente douce et à rincez à l’eau claire et froide. NE PAS utiliser d’acétone ni de produits nettoyants ou autres détergents spéciaux pour nettoyer les panneaux clairs. Il est recommandé de vérifier régulièrement que les couvrejoints des panneaux du toit sont bien en place (pièces en plastique 329 & profilé 981). a • • • • • Outils & Equipement Mètre (ruban) Gants de travail Lubrifiant Tournevis cruciforme (Philips) Escabeau • Perceuse • Grand marteau • Clé à écrous • T001 – outil spécial pour vis 411 et écrous 412 a Avant le montage a Pendant le montage Procédez au montage étape par étape, en respectant l’ordre énoncé dans cette brochure. Etape 1 : Assurez-vous que le châssis est bien carré en mesurant les diagonales, et vérifiez sa mise à niveau à l’aide d’un niveau à bulle. Sélection du site – la serre doit être montée et Etapes 8, 9, 12 : L’ouverture ovale des barres fixée sur une surface plane. transversales A256 doit toujours être placé du Choisissez un emplacement ensoleillé et éloigné côté du châssis de la serre. d’éventuels arbres susceptibles de la surplomber. Montage de la porte (Etape 7, 56-63) :La Nous recommandons vivement de fixer la serre porte peut être installée avec la poignée à directement à de solides fondations en béton. gauche ou à droite à votre convenance. Ces Pour ce faire, utilisez les trous déjà percés dans le instructions sont basées sur une installation châssis métallique fourni. avec la poignée à droite. Etape 7 : Déterminez l’orientation de la porte Sortez toutes les pièces de leurs emballages. Triez-les et comparez-les avec la liste des pièces Le montant de porte 987 est celui sur lequel pour vérifiez que tout y est. seront fixées les charnières. Etapes 56-63 : Le montage de la porte doit Lors de l’assemblage, les pièces doivent être être réalisé selon la décision prise à disposées à portée de main. Gardez toutes les ce stade. petites pièces (vis, etc.) dans un récipient pour éviter de les perdre. Etapes 41 : Choisissez l’emplacement de la fenêtre avant le montage, parmi les options Pour faciliter l’identification des pièces et la indiquées. procédure de montage, les profilés utilisés pour la construction Etape 65 : Immédiatement après avoir de cette serre sont tous terminé l’assemblage, fixez solidement la serre déjà en place. en position finale, parfaitement horizontale. En conséquence, certaines ouvertures des profilés restent inutilisées pendant le montage. EIl s’agit d’un assemblage à pièces multiples qu’il est préférable de réaliser à deux personnes et auquel il fait consacrer au moins une demijournée. Les vis 411 et écrous 412 servent tout au long de la procédure. l Les vis 411 se placent à l’extérieur et les écrous 412 à l’intérieur de la serre. l S’il n’est pas spécifié autrement, Ne serrez les vis et écrous (411 & 412) que de 2 à 3 tours, pas plus. Ne les serrez pas tant que l’assemblage n’est pas complètement terminé, sauf indication contraire. Ces deux icônes indiquent si le serrage des vis est nécessaire ou non. l Cependant, la réalisation de certaines étapes peut nécessiter le serrage provisoire de quelques vis pour empêcher un profilé de tomber en attendant qu’il soit entièrement intégré à l’ensemble de la structure dans les étapes suivantes. DE WICHTIG Bitte lesen Sie diese Anweisungen sorgfältig durch, bevor Sie mit dem Aufbau des Gewächshauses beginnen. Heben Sie diese Anweisungen an einem sicheren Ort auf, um später auf sie zurückgreifen zu können. a Kundendienst Für Hilfe bei dem Aufbau oder für Ersatzteile – können Sie sich entweder auf unserer Webseite einloggen oder unseren Kundendienst anrufen (die Nummer steht auf der Titelseite). Weitere Informationen finden Sie auf unserer Webseite: www.palramapplications.com a l l l l l l l l l l l l l Sicherheitshinweise Es ist von grösster Wichtigkeit, alle Teile genau gemäss den Anweisungen zusammenzubauen. Lassen Sie keinen Schritt aus. Wir empfehlen wärmstens, während des Aufbaus Arbeitshandschuhe zu tragen. Tragen Sie immer Schuhe und eine Schutzbrille, wenn Sie mit stranggepresstem Aluminium arbeiten. Wenn Sie eine Stufenleiter oder Elektrowerkzeuge benutzen, achten Sie darauf, die Sicherheitshinweise des Herstellers zu befolgen. Berühren Sie mit den Aluminiumprofilen keine Oberleitungen. Versuchen Sie nicht, das Gewächshaus bei windigem oder regnerischem Wetter zusammenzubauen. Entsorgen Sie alle Plastiktüten sicher und bewahren sie ausserhalb der Reichweite von kleinen Kindern auf. Halten Sie Kinder vom Aufbaubereich fern. Während des Aufbaus sollten Sie sich nicht gegen das Gewächshaus lehnen oder es drücken. Bauen Sie Ihr Gewächshaus nicht an Orten mit hoher Windbelastung auf. Versuchen Sie nicht, dieses Gewächshaus aufzubauen wenn Sie müde sind, unter dem Einfluss von Drogen oder Alkohol stehen oder zu Schwindelanfällen neigen. Heisse Geräte wie kürzlich benutzte Grills, Schneidbrenner usw. dürfen nicht im Gewächshaus gelagert werden. Vergewissern Sie sich vor Einsetzen der Pflöcke, dass sich keine versteckten Rohre oder Kabel im Boden befinden. Dieses Produkt ist nur für den Einsatz als Gewächshaus geeignet. a Pflege und Wartung Benutzen Sie eine milde Reinigungslösung für die Reinigung Ihres Gewächshauses und spülen es danach mit kaltem, sauberen Wasser ab. Benutzen Sie AUF KEINEN FALL Azeton, Scheuermittel oder andere spezielle Reinigungsmittel, um die klaren Platten zu reinigen. a Werkzeuge & Ausrüstung Maßband Arbeitshandschuhe l Plastik- oder Gummihammer l Schmiermittel l Kreuzschitzschraubenzieher l Stufenleiter l Bohrer l Grosser Hamme Schere Schlüssel l T001 l l l l a Vor dem Zusammenbau Diese ist eine Mehrteilige Montage. Der Zusammenbau der Teile wird am besten von zwei Leuten bewältigt. Rechnen Sie mit mindestens einem halben Tag für den Zusammenbau. Wahl des Standorts - das Gewächshaus muss auf einem flachen ebenen Untergrund aufgebaut und fixiert werden. Wählen Sie eine sonnige Stelle ohne überhängende Bäume. Wir empfehlen Ihnen sehr Ihr Gewächshaus direkt auf einem soliden Betonfundament zu befestigen. Dazu sollten Sie die vorgebohrten Löcher in der gelieferten Metallbasis benutzen. Nehmen Sie alle Teile aus der Verpackung. Sortieren Sie die Teile und überprüfen Sie sie mit Hilfe der Inhaltsliste auf Vollständigkeit. Während des Aufbaus sollten die Teile in Ihrer Nähe auf dem Boden ausgelegt werden. Bewahren Sie alle kleinen Teile (Schrauben usw.) in einer Schüssel auf, sodass sie nicht verloren gehen. Um die Identifikation der Teile zu erleichtern und um die Montage zu vereinfachen, werden gleiche Profile in verschiedene Positionen eingebaut, sodass bei manchen Positionen einige Löcher dieser Profile während der Montage nicht verwendet werden. a Während des Zusammenbaus Führen Sie den Aufbau in der in den Gebrauchsanweisungen aufgeführten Reihenfolge Schritt per Schritt aus. Schritt 1: Vergewissern Sie sich, dass die Basis sowohl quadratisch als auch waagrecht ist, indem Sie die Diagonalen messen und die Basis mit einer Wasserwaage prüfen. Schritte 8, 9, 12: Das ovale Loch in den Querbalken A256 sollte immer auf die Basis des Gewächshauses montiert werden. Das Zusammenbauen der Tür (Schritte 7, 56-63) Die Tür kann nach Ihrer Entscheidung, entweder als eine Tür die sich nach Links öffnen lässt oder als eine Tür die sich nach Recht öffnen lässt, installiert werden. Die beigefügte Bauinstruktionen zeigen einen rechten Türbau. Schritt 7: Bestimmt die Richtung der Tür. Türpost 987 ist wo die Türscharniere gelegt werden. Schritte 56-63: Türzusammenbau sollte gemäß dieser Entscheidung folgen. Schritte 41: Entscheiden sie über die genaue Lageposition des Fensters vor dessen Einbau. Das Fenster kann in einer der angegebenen Optionen installiert werden. Schritt 65: Befestigen Sie das Gewächshaus auf eine endgültige Position direkt nach Beendigung des Aufbaus auf einem waagrechten Untergrund. Schrauben 411 and Muttern 412 werden während des gesamten Aufbauvorgangs benutzt. l Schrauben 411 werden von der Aussenseite des Gewächshauses eingesetzt und Muttern 412 von der Innenseite. l Ziehen Sie die Schrauben und Muttern (411 und 412) nicht mit mehr als 2 – 3 Umdrehungen fest. Ziehen Sie sie erst nach Beendigung der Verglasung weiter fest, falls dies nicht ausdrücklich anders festgelegt ist. l Sie sollten jedoch, in einigen Schritten, ein paar Schrauben vorübergehend festziehen um ein Profil von Fallen zu verhindern bis es in vollem Umfang in den nächsten Schritten verbunden wird. Contents Item 7169 962 961 Qty. Item Qty. 994 1 995 1 985 4 987 2 1 2 4 7168 4 988 2 256 8 996 8 Contents Item 981 999 992 984 3017 3016 Qty. 12 Item Qty. Item Qty. 972 4 318 (PVC) (+1) 973 2 7009 (PVC) (+1) 993 20 328 (+3) 983 2 292 2 986 2 4037 2 7170 3 T001 1 23 2 4 32 2 4 2 2 Contents Item 989 Qty. 1 Item 07 Qty. 1 Item 7172 7163 990 1 08 1 288 126 2 96 286 06 1 7161 1 2 559 1 560 1 7165 2 7164 2 7166 2 10 2 4 7173 570 9 6 567 Qty. 4 4 7011 Item 7 2 7162 991 Qty. 2 Contents Item Qty. 7083 2 Item Qty. 343 Item Qty. 463 4 2 462 7084 2 329 464 2 344L 2 7086 2 344R 2 99 1 7088 423 M4 x 50mm 2 M4 2 22 22 2 Qty. 152 411 M6 (+13) 461 M6 (+1) 412 M6 4 10 7085 Item 6 8 16 422 M4 (+2) 465 M4 (+2) 16 156 (+9) 8 447 (+1) 4008 (+1) 4043 (+1) 16 10 0 1 2 3 4 b b a a 372 cm / 1461/2” 185 cm / 723/4” a = b 372 cm / 1461/2” 185 cm / 723/4” a = b 1 961 x4 412 126 x2 411 x4 a 961 a x4 126 126 961 961 961 b 411 b x2 412 2 962 x2 447 x4 412 x4 411 x4 a+b 962 962 a+b a+b a +b 962 a 447 b 962 962 961 961 x2 3 7169 411 x1 a x2 412 x2 b 412 7169 7169 a 7169 a 411 b b 4 4008 x2 a a 7169 7169 a 4008 5 996 x4 412 x8 411 996 x8 996 996 411 996 996 412 6 412 411 x12 x12 411 411 412 412 7 988 x2 987 x2 a 988 987 988 987 988 987 or a 987 a a a / 987 8 256 286 a a x2 412 x2 411 x8 x8 b a b b 286 256 256 256 c c c 256 9 256 x2 286 x2 412 x8 411 x8 b a 286 256 a a b b 286 256 286 256 256 c c c 10 7011 x2 a 7011 / 7162 7162 x2 c 7162 7162 a b 7011 / 7011 b 7162 7011 c c c c 11 993 x4 411 x4 a b 993 b 993 b b 993 993 993 b a 411 a a 993 a 12 411 256 x4 412 x4 x8 a a a a 256 a 256 256 b b 256 b 256 b b 256 13 972 08 x4 292 x2 412 x8 a 411 x2 x8 a 292 972 972 292 972 972 b b 08 08 x2 14 7011 7162 x4 7011 7011 7011 7011 7162 a a 993 x3 a b b b b b x2 993 7162 b 7011 / 7162 993 x 15 318 PVC x6 a a a a a a a 318 PVC 7011 / 7162 16 412 x5 411 x5 a a a a a a 411 + 412 17 972 972 972 18 7011 7162 x4 x2 993 x3 a 993 b 7011 b 7011 b 7011 b 7011 b 7162 7162 b 7011 a a a / 7162 993 19 318 PVC x6 a a a a a a 318 PVC a 7011 / 7162 20 412 411 x5 x5 a a a a a a 411 + 412 21 972 972 972 972 22 4008 x2 x2 a a a 4008 23 996 411 x2 x2 412 570 x2 x1 a a 570 996 a 996 570 996 570 24 986 559 x1 560 x1 x1 411 a a a 412 411 b 986 986 b 559 560 b x2 412 x2 25 996 411 x2 x2 412 570 x2 x1 a a 570 996 a 996 570 996 570 26 986 7165 x1 7164 x1 x1 411 a a a 412 411 b 986 986 b 7165 7164 b x2 412 x2 27 411 x4 a a a a a 411 28 999 412 x4 411 x8 x8 x4 999 999 999 411 999 + 412 999 a b 29 411 x4 412 a x8 412 a a a a 411 b b b b b 30 7168 x2 a 461 x4 412 x4 b 993 7168 7168 a c a b 7168 993 b 7168 c 412 c 7168 + 461 31 994 411 x2 995 412 x2 a 994 994 995 a a / 995 32 7170 x2 7165 x1 7164 x1 7162 x2 a x2 7162 7164 7170 b 7170 7165 a b 7162 7162 b 7170 7162 33 411 x2 412 x2 a x2 411 a a + 412 34 7170 7161 x1 7162 x1 x1 a x2 7162 7161 7170 b 7162 b a a 7161 7170 7162 35 411 7168 x2 x2 412 a 7168 411 a 7168 a 7168 + 412 x2 36 973 x2 07 x1 412 x4 411 x4 a 973 973 07 a 973 973 07 37 06 412 x1 x4 411 x4 a a 973 411 b 973 b 973 06 a 411 973 38 412 x10 411 x10 a 411 a a 412 a a b b 411 412 39 412 973 x1 a 411 a b 973 a 973 b 973 x4 x4 40 412 993 x2 a 461 x2 x4 411 x2 b 7168 a 993 993 993 a 993 b 412 b c c + 461 c 993 7168 41 EN GR FR SP Window Location Fenster Standort Fenêtre Emplacement Ventana Ubicación or 42 288 411 993 x2 x4 412 x2 x4 a b 411 x2 993 993 993 412 288 288 288 288 x2 43 411 993 412 x2 x2 a a a 993 993 b 993 5cm 57. 1/2 / 22 993 ” b b 1 2 44 990 x1 411 7166 x2 a 990 990 a 7166 a 990 411 x1 45 990 + 7166 x1 a 993 993 990 7166 46 981 x2 412 a 981 x2 b b a c 981 c 981 47 412 993 x6 a a a 411 x6 a a x4 993 x6 a a 993 x2 b 993 b b b b b 993 1 2 48 7172 x7 a 7163 x4 318 PVC x11 a 318 PVC 318 PVC 7172 / 7163 7165 / 7164 59 981 7163 + 318 x1 x1 a 7163 981 7163 7163 a 981 b 318 PVC 7163 981 b 981 50 7163 + 318 7172 + 318 x3 x7 a 7163 981 7163 981 7172 7163 b 7172 981 981 7163 7172 981 981 318 PVC 7163 7172 7172 981 7172 981 981 7172 981 981 c 981 51 329 x10 4043 x10 a + b a a + b a + b a + b a + b a + b b 329 329 4043 b 4043 52 992 x2 a x2 7166 x1 b 3017 3017 992 3017 992 a 3017 7166 a 992 992 b b 992 7166 3017 53 989 x1 991 4008 x1 x4 b 4008 989 991 a 4008 a a 4008 7166 989 4008 b 991 b 4008 4008 54 7166 7009 x1 7166 x2 7166 7009 7009 7166 55 99 a x1 22 22 2 x2 22 22 99 a 1 a 99 99 b b 99 b 2 x2 1 22 56 464 422 x8 x16 465 x16 a 422 a 464 465 a a a 464 464 57 983 567 x2 x2 7173 x2 a 567 / 7173 411 x4 b 411 983 567 / 7173 567 / 7173 a 983 b 983 567 / 7173 x2 58 984 x2 4008 985 x4 x4 a 985 a 984 4008 985 a b a a 985 b 4008 984 x2 x2 985 59 3016 288 x2 412 462 x4 411 x2 a x2 462 411 462 288 x6 b 288 412 a b x6 x1 3016 x14 x2 412 411 x14 x1 3016 412 462 462 60 4008 x4 4037 984 x2 x2 x2 984 984 4037 4008 4037 4008 4008 61 7086 x2 7085 x2 a x2 7086 7084 x2 412 7083 7085 x2 b 7088 x2 M4 x 50mm 7088 423 412 7084 x2 7085 423 x4 7083 62 463 a x2 464 567 0 180 a+b b 463 567 a+b 63 463 a x2 464 7173 0 180 a+b 7173 b 463 a+b 64 344L 344R x2 343 x2 447 x2 b 343 x4 a 344 447 344L 343 b a 344L a 344R a b 343 65 M96 P328 x6 x32 a M96 or b b b b b b b b b a P328 a Version1_12/2011 a a
This document in other languages
- français: Palram 701950
- Deutsch: Palram 701950