Transcript
For models: 990-726, 760-515, 989-472, 594465, 568545, 594469, 594473 • If you solder during faucet installation, remove cartridges, seats and washers prior to applying flame, otherwise you will void the warranty. • Cover drainopenings to avoid loosing parts. • When cutting or soldering pipe, use safety glasses to protect your eyes. Prior to beginning installation, turn off the cold and hot water lines and open the old faucet to release build-up pressure. Prior to new faucet Installation, turn the connector nuts fingertight, then use one wrench to anchor the fitting and a second wrench to tighten the nut one additional turn. Connections that are too tight will reduce the integrity of the system. Wrap all threaded connections with pipe tape available at your local plumbing supply store. Always wrap in a clockwise direction. The fittings should be installed by a State-licensed plumber. A663844C 1-a⊙. Index Button-Cold A663844H 1-b⊙. Index Button-Hot A008233 2. Screw (3/16" -24 * 11/16" L) A029216 3⊙. Metal Handle ⊙ A039736 4 . Handle Adaptor ⊙ A018563 5 . Handle Base A507376N 6-b. Ceramic Disc Cartridge-Cold A507375N 6-b. Ceramic Disc Cartridge-Hot A667559 7⊙. Trim Ring 8. O-Ring (Ø1-5/8" ID * Ø1-13/16" OD) A072032 A603186 9. Mounting Hardware A500550N-50 10⊙. Aerator A010570 11. Washer A663845NWH 12. Flow Basin A663121 13⊙. Pop-up Plunger Assembly A663122 14. Washer and Nut A605222 15. Pop-up Body ⊙ A025329 16 . Lift Rod A663521 17. Lift Rod Strap A200009 18. Washer (Outer) A009063 19. Ball Nut A120030 20. Spring Clip A026004 21. Ball Rod (6-5/16"L) A200109 22. Washer (Inner) 990-726, 760-515, 989-472, 594465, 568545, 594469, 594473 (V1)
