Download NuTone CFH52RB Installation Guide

MODELS CFH52BS • CFH52PB • CFH52RB • CFH52WH
Page 5
FINISH INSTALLATION
1. Swing the motor assembly up into position under the mounting
bracket.Securethebrackettotheplatewiththescrewsprovided.
(Fig.9)
2. Carefullyliftthemotorhousingontothemountingbracket,properly
align the holes and tighten the motor housing with the 4 screws
supplied.(Fig.10)
MOUNTING
BRACKET
MOTOR
ATTACH FAN BLADES
SCREWS
Yourfanisequippedwith2-sidedreversibleblades.Selectthefinishand
installthebladebracketsoverthesideofthebladesthatwillbevisible.
1. Attachthebladetothebladebracketusingthescrewsandfiber
washersasshowninFigure11.Startscrewintobracket.Repeat
forthetworemainingscrews.
2. Tighteneachscrew.Makesurethebladeisstraight.
3. Fastenbladeassemblytomotorusingthescrewssupplied.(Fig.
11)
FIGURE 9
MOUNTING
BRACKET
MOTOR
HOUSING
SCREWS
FIGURE 10
SCREWS
FIBER
WASHERS
SCREWS
BLADE
BLADE BRACKET
FIGURE 11