Download Speakman SA-1002 Instructions / Assembly

 . , , Loosen Set Screws with supplied Allen Wrench, Drill 1/4” hole in marked locations. If drilling into
Instructions for Models: What You Need To Know: and remove Mounting Brackets from both ends (4) tile, be sure to use a drill bit designated for tile.
of Slide Bar assembly. If mounting directly into stud or wood wall, secure
lower end bracket to wall with mounting screws
SA-1002 Tools: without drilling holes. a
SA-1002-BN pe Ç( о / (5 _ dy
SA-1 002-PN illips Screwdriver enci | _ 7 <
G <
*Drill with 1/4” Bit *Allen Wrench |
(supplied) )
Place Slide Bar assembly on to wall in the desired Insert Plastic Anchors into drilled holes and press
vu mounting position. Take care that the Slide Bar is in until flush with wall. Secure Mounting Brackets
oriented in a vertical position. Using a pencil, to wall with Mounting Screws using Phillips
— lightly trace outline of end brackets on to wall. screwdriver.
Helpful:
* 1/4" Tile Drill Bit C
(ON
(a Important Notes: Center Mounting Bracket within traced outline. Instal Slide Bar assembly over Mounting Brackets,
Be sure to read instructions thoroughly before Mark the 2 mounting locations with a pencil. and secure with Set Screws using supplied Allen
beginning installation. Do not overtighten any Wrench.
Need Help? connections or damage may occur.
For additional assistance or service call: Safet Tips:
This item is NOT designed for use as a grab bar.
SPEAKMAN Company Do not mount in locations where product is likely
400 Anchor Mill Road to be used as a grab bar.
New Castle, DE 19720
—
—
2
AN
(
d
——
Use caution when drilling into walls to avoid
PHONE: 800-537-2 107 electrical and plumbing lines hidden within wall.
EMAIL: [email protected]
WEB: www.speakmancompany.com Maintenance: NC и
Clean with a soft, damp cloth only. Do not use — )
scrub pads, detergents or cleansers as they may
92-3296-R2 harm the protective finish of your Slide Bar (2x)
14
4M THREAD
SET SCREW
~~ RPG05-0886
и 3.
023" 24 |
[60mm] |[ 69mm]
4 | 04
3
8 L
[59mm]
| +
ol |
| Zu
257
[654mm]
a [118mm]
3.
LL 93
[20mm]
N | — Y