Download Xbrand XB-1009H-XX User's Manual

Cooling & Comfort Station with Hub
model: XB-1009H-XX
Thank you for purchasing an Xbrand Cooling &
Comfort Station with USB Hub. We appreciate the
opportunity to earn your business and trust that
you’ll enjoy using the product as much as we do.
In addition to just being cool, your Cooling and Comfort
Station has 2 key purposes:
1.Keeps your laptop cool so it lives longer and the
processor runs faster.
Let us know who you are and how we can serve
you better … please fill out the warranty
registration online at www.xbrandproducts.com
2.Gives you access to all of your USB peripherals via
single USB cable connection to you laptop.
CONNECTION DIAGRAM
a.connection for power supply
(make connection when using Station at a desk)
b. connection for USB cable
a
b
c. connection for USB devices
(mouse, charging cable, iPod …)
c
STEPS FOR USING STATION AT A DESK
extend leg & remove cable
connect power supply
3
1
connect USB cable
to
outlet
to laptop
6
5
product set-up
2
4
FOLLOW ORDER
USB ports
connect
power
to laptop
to Station
to Station
After the connections in step 1 are completed
(be sure to follow correct order) you can begin
connecting your USB devices to the Station’s
integrated USB ports.
Connect devices one at a time, making sure each
is recognized by the laptop before connecting the
next.
using the hub
Cooling & Comfort Station with Hub
model: XB-1009H-XX
STEPS FOR USING STATION ON YOUR LAP
remove cable
leg position
connect USB cable
2
to laptop
4
3
1
product set-up
USB
ports
to laptop
the leg can be in the
open or closed position
during lap use
to Station
While in your lap, the Station’s integrated fan and hub will
run off of the power from the laptop’s USB port. This
allows you to use the Station as a portable cooling pad
while you are mobile (not at a desk).
NOTE: High power USB devices, such as external hard
drives, may not function correctly when using the Station
in your lap. To correct this situation, the Station’s power
supply must be connected to both the Station and a
power source.
using the hub
Product support & contact information
Hotwire Development - 16039 N. 82nd Street, Scottsdale, AZ 85260, 480.889.0150
Please visit our website at www.xbrandproducts.com for the most current product support and contact information.
LIMITED WARRANTY
Xbrand is a trademark of Hotwire Development LLC. Hotwire Development LLC warrants this product to be free from defects in materials
and workmanship for a period of one year from the date of purchase. This warranty is limited to repairing or replacing, at Hotwire
Development’s sole option, any such defective products. To obtain service under warranty you must obtain a Return Material Authorization
(RMA) number from an Xbrand representative. The product must be returned with transportation charges prepaid and must be
accompanied by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not apply to
equipment which has been damaged by accident, negligence, or misapplication or has been altered or modified in any way. This warranty
applies to the original purchaser. EXCEPT AS PROVIDED HEREIN, HOTWIRE DEVELOPMENT MAKES NO WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some
countries do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to
the purchaser. EXCEPT AS PROVIDED ABOVE, IN NO EVENT SHALL HOTWIRE DEVELOPMENT BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGE. Specifically, Hotwire Development is not liable for any costs, such as lost profits or revenue, loss
of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise. This
warranty gives you specific legal rights and you may also have other rights which may vary from location to location.
This equipment complies with Part 15 of the FCC Rules. Operation is
subject to the following conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
© 2008 Hotwire Development. All rights reserved. US Patent
6,527,241 and Patents Pending. Xbrand is a trademark of
Hotwire Development LLC. All other trademarks are the property
of their respective owners