Download TP-Link T3700G-28TQ CLI Reference Guide

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
timeout —— The maximum time for the switch to wait for the response from
the management station before resending a request, ranging from 1 to 3600 in
seconds.
Command Mode
Global Configuration Mode
Example
Add a Notification entry, and configure the IP address of the management Host
as 192.168.0.146, the UDP port as 162, the User name of the management
station as admin, the Security Model of the management station as v2c, the type
of the notifications as inform, the maximum time for the switch to wait as 1000
seconds, and the retries time as 100:
T3700G-28TQ(config)#snmp-server host 192.168.0.146 162 admin smode
v2c type inform retries 100 timeout 1000
snmp-server engineID
Description
The snmp-server engineID command is used to configure the local and remote
engineID of the switch. To restore to the default setting, please use no
snmp-server engineID command.
Syntax
snmp-server engineID { [local local-engineID] [remote remote-engineID] }
no snmp-server engineID
Parameter
local — — Local Engine ID for local clients. The Engine ID is a unique
alphanumeric string used to identify the SNMP engine on the switch. Its length
ranges from 10 to 64 hexadecimal characters, which must be even number
meanwhile.
remote —— Remote Engine ID for the switch. The Engine ID is a unique
alphanumeric string used to identify the SNMP engine on the remote device
which receives informs from the switch. Its length ranges from 10 to 64
hexadecimal characters, which must be even number meanwhile.
Command Mode
Global Configuration Mode
242