Download Technicolor HD Security Terminator Model Command Set Primer

From this page, you may select 13 different commands from the MessageType: pulldown
menu which can control the DCI401MCS in a variety of different ways. The Receiver_ID field
is used to route command messages to the right DCI401MCS box or boxes
Receiver_ID:
For every option, you may choose to broadcast the control message to a specific receiver, or
to the entire network of receivers. When you first access the control page, you will see the
Receiver_ID field set to 0xffffffff. This setting will broadcast the control message to every
DCI401MCS powered on in the network and tuned to a channel originating from the COM1000.
If you desire to send messages to a specific receiver, you may replace the 0xffffffff with the
10 digit Unit Identifier located on the bottom of the receiver or on the product packaging.
Technicolor MCS
101 W. 103rd St
Indianapolis, IN 46290
www.technicolor.com/mcs