Download Star Micronics Line Thermal Printer User's Manual

3.12.
Details of the Print Starting Trigger Control Command
This command is for models equipped with an expansion control function for page control of line unit commands, by
controlling the image buffer by page.
ESC GS g 0 m n
[Name]
[Code]
Print starting trigger
ASCII
ESC GS
g
Hex.
1B 1D 67
Decimal
27 29 103
[Defined Area]
[Initial Value]
[Function]
0
30
48
m
m
m
n
n
n
m = 0, n = 0
--Starts printing when there is unprinted data in the image buffer.
It is prohibited to send this command while in the raster mode.
ESC GS g 1 m n
[Name]
[Code]
Print starting timer
ASCII
ESC GS
g
Hex.
1B 1D 67
Decimal
27 29 103
[Defined Area]
[Initial Value]
[Function]
1
31
49
m
m
m
n
n
n
m = 0, 0 ≤ n ≤ 255
Depends on the model
Sets the print starting timer specified at n x 10 msec.
The print starting timer starts measuring from the point where the print data reception stops, and
measures up to the set print starting timer.
When the set print starting timer is reached, the printer starts printing if there is unprinted data in
the image buffer.
It is prohibited to send this command while in the raster mode.
n
0
1 to 255
Operating Mode
Print starting timer = initial value
Print starting timer n x 10 msec.
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications
3-115