Download Star Micronics Line Thermal/Dot Printer User's Manual

Rev. 0.00
ESC * r m l n NUL
[Name]
[Code]
Set raster left margin
ASCII
ESC
Hexadecimal
1B
Decimal
27
[Defined Area]
[Initial Value]
[Function]
<Thermal>
Thermal
Slip
Validation
Thermal
Slip
Validation
*
2A
42
:
:
:
:
:
:
r
72
114
m
6D
109
l
6C
108
n
n
n
NUL
00
0
n=0
-
Sets raster left margin.
This command sets the left margin to (n x 8) dots.
When the left margin exceeds the printable area, or if the left margin specification eliminates the print
area ((printable region - right margin) ≥ left margin specified value), this command is ignored.
n is a decimal description (max. 255 digits) using ASCII characters.
<Slip>, <Validation>
Use prohibited.
ESC * r m r n NUL
[Name]
[Code]
Set raster right margin
ASCII
ESC
*
Hexadecimal
1B 2A
Decimal
27 42
[Defined Area]
[Initial Value]
[Function]
<Thermal>
Thermal
Slip
Validation
Thermal
Slip
Validation
:
:
:
:
:
:
r
72
114
m
6D
109
r
72
114
n
n
n
NUL
00
0
n=0
-
Sets raster right margin.
This command sets the right margin to (n x 8) dots.
When the right margin exceeds the printable area, or if the right margin specification eliminates the
print area ((printable region - left margin) ≥ right margin) specified value, this command is ignored.
n is a decimal description (max. 255 digits) using ASCII characters.
<Slip>, <Validation>
Use prohibited.
STAR Line Mode Command Specifications
3-97