Download Star Micronics RS232 User's Manual
Transcript
Pin No. Signal name Direction SERIAL 5 6 SG DSR — IN 7 8 RTS INIT OUT IN 9 FAULT OUT Function Star mode Data terminal ready signal. When the printer is ready to receive data, this signal changes to “SPACE”. Signal ground Signal line that indicates whether the host can receive data Space : Host can receive data Mark : Host cannot receive data Does not confirm the status of this signal in XON/ XOFF communication or STAR mode. This signal line can be used as an external reset signal by setting the DIP switches. A pulse width of 1 ms or more mark state activates reset. Same as DTR signal. This signal line can be used as an external reset signal by setting the DIP switches. A pulse width of 1 ms or more space state activates reset. In the Star mode, the printer will enter the mark state during the following errors: no paper, head up, cutter error. In ESC/POS mode, this is normally space. –8–