Download Snapper CICFR5505HV User's Manual
Transcript
Parts Manual for INTERMEDIATE REAR TINE TILLERS SERIES 3, 4 & 5 MODEL CICFR5505HV EICFR5004B EICFR5004B EICFR5505BV ICFR5004B ICFR5505BV ICFR7005BV IR5003B NIR5003B McDonough, GA, 30253 U.S.A. COPYRIGHT © 2006 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Manual No. Revision 9, 2/28/2006 7006047 TP 400-5172-9-RT-N Table Of Contents PAGE 4 6 10 14 16 20 22 24 26 28 30 32 GROUP HANDLES, CONTROLS, WEIGHTS MAIN CASE/GEARS (Series 3) MAIN CASE/GEARS (Series 4&5) TILLER HEAD COMPONENTS SHIFT & DRIVE COMPONENTS WHEELS, TIRES, RIMS DECALS DECALS (continued) DECALS (continued) DECALS (continued) CULTIVATOR SHIELD KIT HILLER - FURROWER KIT INTERMEDIATE SERIES 3, 4 & 5 Manual No. 3 7006047 TP 400-5172-9-RT-N HANDLES, CONTROLS, WEIGHTS Manual No. 7006047 TP 400-5172-9-RT-N INTERMEDIATE 4 SERIES 3, 4 & 5 HANDLES, CONTROLS, WEIGHTS Item Part No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 7018808 7091575 7015252 7091601 7091681 7034746 7036170 7014681 7014682 7032593 7018787 7091540 7090831 7090361 7038221 7091612 7090861 7091303 7036171 7035107 7011791 7038223 7032496 7091076 7061794 Qty 1 5 1 12 7 1 1 2 1 1 1 4 1 12 1 4 4 3 1 1 1 7 2 16 1 Description Note CABLE Clutch NUT, 5/16-18 Hex Center Lock SPRING, Tine NUT, 5/16-18 Hex Flange Lock BOLT, 5/16-18 x 1” Hex Flange Lock BAR, Handle IRT PANEL, Tiller Dash BUSHING COVER, Cable CATCH, Bail BAIL SCREW, 5/16-18 x 1-1/2” Hex Head Cap GR5 SCREW, 5/16-18 x 2-3/4” Hex Head Cap GR5 SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap SUPPORT, Handle BOLT, 5/16-18 x 1-1/2” Sq. Neck Carriage GR5 BOLT, 5/16-18 x 1-3/4” Sq. Neck Carriage GR5 BOLT, 5/16-18 x 3/4” Square Neck Carriage GR5 BAR, Stand-Up BOX, Weight RETAINER, 5/16” Bolt (Black) WEIGHT, Steel BRACKET, Weight WASHER, 5/16” Flat BAG, Hardware - IR5003B Was 91067 Was 91070 Was 91066 Was 90582 Was 91072 not used on ICFR5004B Contains 2 each of P/N's 28725 and 91606 (see Tiller Head Component Page) Footnotes: INTERMEDIATE SERIES 3, 4 & 5 Manual No. 5 7006047 TP 400-5172-9-RT-N MAIN CASE/GEARS (Series 3) Manual No. 7006047 TP 400-5172-9-RT-N INTERMEDIATE 6 SERIES 3, 4 & 5 MAIN CASE/GEARS (Series 3) Item Part No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 7061821 7034681 7034682 7034677 7015597 7091681 7015598 7028672 7028753 7045130 7021977 7022512 7046604 7023252 7014469 7015405 7015679 7015313 7015409 7015350 7010756 7023849 7028717 7015136 7015319 7040609 7015347 7015318 7015348 7018790 7045127 7053826 7054412 7042764 7051653 7015342 7015343 Qty 1 1 2 1 7 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 3 1 1 1 1 1 1 Description Note ASSEMBLY, Case, Complete (Series 3) CASE HALF, Left Hand CASE HALF, Right Hand REINFORCEMENT, Case CLAMP, Speedy BOLT, 5/16-18 x 1” Hex Flange Lock SEAL, Cap SPACER, Tine Shaft (Short) GASKET, Main Case IR5003B Tiller SPACER, Main Shaft (.64” long) PIN, Guide SHAFT, Main Detent (4 Position) FORK, Primary Shaft SPRING, Compression BALL, Detent CRANK, Shift GASKET, Shift Arm Pivot PIVOT, Shift Arm PLUG, 1/2” Button O-RING BEARING, .625 x 1.37 x .435 SHAFT, Input PINION, Input SEAL, Oil BEARING, Axle WELDMENT, Axle (#40/34T) CHAIN, Traction #40 SPACER, Wheel Shaft (.686” Thick) SPACER, 5/8 x 1.11” GEAR & SPROCKET SHAFT, Gear * ASSY, Tine Drive Gear, #50, Sprkt 10T, Gear 34T * ASSEMBLY, Wheel Drive Gear SPACER, Reverse (2.567” Long) * ASSEMBLY, Reverse Idler SEAL, Oil O-RING service kit Was 14500 Footnotes: NOTE: * Part # 15339 DX Bearings are included, if purchased separately they must be pressed in. INTERMEDIATE SERIES 3, 4 & 5 Manual No. 7 7006047 TP 400-5172-9-RT-N MAIN CASE/GEARS (Series 3) Manual No. 7006047 TP 400-5172-9-RT-N INTERMEDIATE 8 SERIES 3, 4 & 5 MAIN CASE/GEARS (Series 3) Item Part No 37 38 39 40 41 42 43 44 45 46 47 49 48 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 7018869 7029890 7041726 7028476 7091513 7011791 7091076 7091690 7091297 7090053 7090095 7011024 7091946 7090873 7090460 7091601 7091584 7090953 7020938 7090072 7091122 7091819 7023514 7038647 7038648 7034680 7061174 7033962 7033531 7090606 Qty 1 1 1 1 4 1 16 4 4 4 4 1 21 3 3 8 6 3 1 12 1 3 1 1 1 1 1 1 3 4 Description Note BEARING, Tine Shaft SPACER, Tine Shaft Long WELDMENT, Tine Shaft (#50/18T) CHAIN, Tine (Endless Roller) #50 SCREW, 5/16-24 x 1-3/4” Hex Head Cap GR5 RETAINER, 5/16” Bolt (Black) WASHER, 5/16” Flat WASHER, 5/16” Split Lock NUT, 5/16-24 Hex WASHER, 1/4” Internal Tooth Lock NUT, 1/4-20 Hex PLUG SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap WASHER, 7/16” Internal Tooth Lock NUT, 7/16-20 Hex NUT, 5/16-18 Hex Flange Lock NUT, 1/4-20 Hex Flange Lock SHIM-WASHER SHIM WASHER, 5/8” SCREW, 1/4-20 x 5/8” Hex Head Cap GR5 SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap O-RING, #012 REINFORCEMENT, R.H. Frame REINFORCEMENT, L.H. Frame BRACE, Belt Cover SIDE PLATE BRACKET, Belt Cover- IRT WASHER, Shim BOLT, 5/16-18 x 5/8” Hex Flange Lock Was 91689 Was 91692 Was 91023 Was 91024 Was 91070 Was 91065 Was 79405 Was 90539 Was 90362 Was 33415 Was 91510 Footnotes: NOTE: * Part # 15339 DX Bearings are included, if purchased separately they must be pressed in. INTERMEDIATE SERIES 3, 4 & 5 Manual No. 9 7006047 TP 400-5172-9-RT-N MAIN CASE/GEARS (Series 4&5) Manual No. 7006047 TP 400-5172-9-RT-N INTERMEDIATE 10 SERIES 3, 4 & 5 MAIN CASE/GEARS (Series 4&5) Item Part No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 7057824 7034681 7034682 7034677 7015597 7091681 7015598 7028672 7028753 7046787 7021977 7046786 7046604 7023252 7014469 7015405 7015679 7015313 7015409 7015350 7010756 7023849 7046785 7015136 7015319 7040609 7015347 7015318 7015348 7018790 7045127 7057823 7054412 7046791 7051653 7015342 7015343 Qty 1 1 1 2 1 7 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 3 1 1 1 1 1 1 Description Note ASSEMBLY, Tiller Case CASE HALF, Left Hand CASE HALF, Right Hand REINFORCEMENT, Case CLAMP, Speedy BOLT, 5/16-18 x 1” Hex Flange Lock SEAL, Cap SPACER, Tine Shaft (Short) GASKET, Main Case IR5003B Tiller SPACER, Main Shaft (.47” long) PIN, Guide SHAFT, Main Detent (5 Position) ICFR FORK, Primary Shaft SPRING, Compression BALL, Detent CRANK, Shift GASKET, Shift Arm Pivot PIVOT, Shift Arm PLUG, 1/2” Button O-RING BEARING, .625 x 1.37 x .435 SHAFT, Input PINION, Input ICFR SEAL, Oil BEARING, Axle WELDMENT, Axle (#40/34T) CHAIN, Traction #40 SPACER, Wheel Shaft (.686” Thick) SPACER, 5/8 x 1.11” GEAR & SPROCKET SHAFT, Gear * ASSY, F&R Tine Drive Gear #50, Spkt 10T Gear 34T * ASSEMBLY, Wheel Drive Gear SPACER, Reverse Idler (1.245” long) * ASSEMBLY, Reverse Idler SEAL, Oil O-RING Was 14500 Footnotes: NOTE: * Part # 15339 DX Bearings are included, if purchased separately they must be pressed in. INTERMEDIATE SERIES 3, 4 & 5 Manual No. 11 7006047 TP 400-5172-9-RT-N MAIN CASE/GEARS (Series 4&5) Manual No. 7006047 TP 400-5172-9-RT-N INTERMEDIATE 12 SERIES 3, 4 & 5 MAIN CASE/GEARS (Series 4&5) Item Part No 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 7018869 7029890 7041726 7028476 7091513 7011791 7091076 7091690 7091297 7090053 7090095 7091946 7011024 7090873 7090460 7091601 7091584 7090953 7020938 7090072 7091122 7091819 7023514 7038647 7038648 7034680 7061174 7033962 7033531 7058469 7090606 7072801 Qty 1 1 1 1 4 1 16 4 4 4 4 21 1 3 3 8 6 3 1 12 1 3 1 1 1 1 1 1 3 1 4 1 Description Note BEARING, Tine Shaft SPACER, Tine Shaft Long WELDMENT, Tine Shaft (#50/18T) CHAIN, Tine (Endless Roller) #50 SCREW, 5/16-24 x 1-3/4” Hex Head Cap GR5 RETAINER, 5/16” Bolt (Black) WASHER, 5/16” Flat WASHER, 5/16” Split Lock NUT, 5/16-24 Hex WASHER, 1/4” Internal Tooth Lock NUT, 1/4-20 Hex SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap PLUG WASHER, 7/16” Internal Tooth Lock NUT, 7/16-20 Hex NUT, 5/16-18 Hex Flange Lock NUT, 1/4-20 Hex Flange Lock SHIM-WASHER SHIM WASHER, 5/8” SCREW, 1/4-20 x 5/8” Hex Head Cap GR5 SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap O-RING, #012 REINFORCEMENT, R.H. Frame REINFORCEMENT, L.H. Frame BRACE, Belt Cover SIDE PLATE BRACKET, Belt Cover- IRT WASHER, Shim * ASSY, Gear 16T (Incl. two 15339 DX Bearings) BOLT, 5/16-18 x 5/8” Hex Flange Lock WASHER, Shim .63 x 1.24 x .05 Was 91689 Was 91692 Was 91023 Was 91024 Was 91070 Was 91065 Was 79405 Was 90539 Was 90362 Was 33415 Was 91510 Footnotes: NOTE: * Part # 15339 DX Bearings are included, if purchased separately they must be pressed in. INTERMEDIATE SERIES 3, 4 & 5 Manual No. 13 7006047 TP 400-5172-9-RT-N TILLER HEAD COMPONENTS Manual No. 7006047 TP 400-5172-9-RT-N INTERMEDIATE 14 SERIES 3, 4 & 5 TILLER HEAD COMPONENTS Item Part No Qty Description Note 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 7032553 7091601 7091681 7034745 7034684 7091602 7034756 7090361 7032494 7091020 7032536 7091584 7036168 7075157 7028725 7091606 7075158 7038235 7091604 7034683 7090595 7038272 7090290 7034755 7034757 7091841 7057831 1 7 2 2 1 2 1 8 1 2 2 6 1 1 2 2 1 1 4 2 4 2 3 1 1 2 HANDLE, Depth Bar NUT, 5/16-18 Hex Flange Lock BOLT, 5/16-18 x 1” Hex Flange Lock COVER, Side Tine IR5003B COVER, Tine IR5003B BOLT, 5/16-18 x 1-1/2” Hex Flange Lock GR5 SPRING, Depth Bar IR5003B SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap PIN, Drag Shield (1/4” Dia. x 14-1/2” Steel Rod) PUSHNUT, 1/4” HINGE, Half NUT, 1/4-20 Hex Flange Lock SHIELD, Drag WELDMENT, Right Tine SCREW, 5/16-24 x 2” Hex Head Cap GR5 NUT, 5/16-24 Hex Center Lock WELDMENT, Left Tine DEPTH-BAR BOLT, 1/4-20 x 1/2” Short Neck Carriage GR5 REINFORCEMENT, Rear Tine Cover BOLT, 5/16-18 x 5/8” Hex Flange Lock GR5 REINFORCEMENT, Front Tine Cover SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap BRACKET, Support IR5003B PLATE, Latch SCREW, 5/16-18 x 1” Hex Washer Self-Tap ASSEMBLY, Tine (Incl. items 27 thru 30) 27 28 29 30 7046798 7075142 7014981 7090524 7090289 1 8 16 16 8 WELDMENT, Tine Hub ICFR TINE, 11.5” (.312” Thick) BOLT, 3/8-24 Shoulder NUT, 3/8-24 Hex Top Lock GR C NUT, 3/8-24 Hex Center Lock GR5 or B Was 91070 Was 91065 Was 49735 Was 49734 Was 91686 Was 91742 ICFR5004B, EICFR5004B, ICFR5505BV, CICFR5505HV, EICFR5505BV and ICFR7005BV only Was 38215 Footnotes: INTERMEDIATE SERIES 3, 4 & 5 Manual No. 15 7006047 TP 400-5172-9-RT-N SHIFT & DRIVE COMPONENTS Manual No. 7006047 TP 400-5172-9-RT-N INTERMEDIATE 16 SERIES 3, 4 & 5 SHIFT & DRIVE COMPONENTS Item Part No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 7047884 7091601 7013550 7091303 7090361 7090959 7023851 7011791 7038646 7033349 7017018 7046932 7091294 7090290 7032843 7074749 7090964 7032846 7074748 7013849 7010948 7032662 7091585 7090595 7016314 7012830 7011194 7090201 7015403 7023852 7091102 7091122 7033962 7091946 7016022 7090951 7091076 Qty 1 8 1 3 12 1 1 1 1 2 1 1 3 3 1 1 1 1 1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 21 1 1 16 Description Note WELDMENT, Shift Lever NUT, 5/16-18 Hex Flange Lock ROLL PIN 3/16 x 1” BOLT, 5/16-18 x 3/4” Square Neck Carriage GR5 SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap BOLT, 5/16-18 x 2-1/2” Short Neck Carriage GR5 TUBE, 3/8” I.D. x 1-7/8” Long RETAINER, 5/16” Bolt (Black) PLATE, Shift BUSHING, Rubber COVER, Shift COVER, Shift WASHER, 1/4” Flat SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap BRACKET, Idler Pivot (shown) BRACKET, Idler Pivot (not shown) BOLT, 3/8-16 x 1-1/2” Flat Head Carriage BRACKET, Idler Arm (shown) BRACKET, Idler Arm (not shown) SPACER, 5/16” I.D. PULLEY, Idler ( 2” Outside Diameter) GUIDE, Idler NUT, 3/8-16 Hex Center Lock GR5 or B BOLT, 5/16-18 x 5/8” Hex Flange Lock GR5 WASHER, 11/32” Flat KEY, 3/16 Sq. x 3/4” Long PULLEY, Driven (9” Outside Dia.) SCREW, 5/16-18 x 5/16” Hex Set BELT, Drive (4L Kevlar 19.09” effective length) SPACER, 5/8” Internal Dia. WASHER, 1/4” Belville SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap BRACKET, Belt Cover- IRT SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap COVER, Belt NUT, 5/16-18 Hex Large Flange Center Lock WASHER, 5/16” Flat Was 91070 Was 91072 Was 90055 Was 91686 Was 90546 Was 90539 Footnotes: NOTE: * Purchase engine parts from engine manufacture dealer. INTERMEDIATE SERIES 3, 4 & 5 Manual No. 17 7006047 TP 400-5172-9-RT-N SHIFT & DRIVE COMPONENTS Manual No. 7006047 TP 400-5172-9-RT-N INTERMEDIATE 18 SERIES 3, 4 & 5 SHIFT & DRIVE COMPONENTS Item Part No Qty 35 36 37 38 39 40 41 7090322 7090391 7032541 7011809 7015226 7011762 7091841 3 3 1 1 1 1 2 42 7073743 7074764 7073801 7073802 7074765 7028620 1 1 1 1 1 1 2 43 44 45 46 Description Note SCREW, 5/16-24 x 1/2” Hex Head Cap GR5 WASHER, 5/16” Internal Tooth Lock GUIDE, Belt PULLEY, Engine (2-1/2” Outside Dia.) GUIDE, Belt (Finger) BOOT, Spark Plug SCREW, 5/16-18 x 1” Hex Washer Self-Tap * ENGINE, B&S 5 HP Mod 130202-0127-01 * ENGINE, B&S 5.5 HP Mod 126432-0036-E1 * ENGINE, Honda 5.5 HP Mod GX160K1QX2 Type 553700 * ENGINE, B&S 7 HP Mod 120332-0208-E1 MUFFLER GUARD, 5HP B&S #391237(Euro) not shown MUFFLER GUARD, 5.5HP B&S (not shown) SCREW, B&S #94810 (Euro) (not shown) SCREW, B&S #94887 (Euro) (not shown) SCREW, B&S #95259 (Euro) (not shown) SPACER, .340 I.D. x .63 O.D. x .310 Thick Was 91685 Was 91742 Footnotes: NOTE: * Purchase engine parts from engine manufacture dealer. INTERMEDIATE SERIES 3, 4 & 5 Manual No. 19 7006047 TP 400-5172-9-RT-N WHEELS, TIRES, RIMS Manual No. 7006047 TP 400-5172-9-RT-N INTERMEDIATE 20 SERIES 3, 4 & 5 WHEELS, TIRES, RIMS Item Part No 1 2 3 4 5 6 7018579 7018580 7014512 7014511 7012234 7034162 7029841 Qty 1 1 1 1 1 2 2 Description Note ASSEMBLY, Right Wheel (Incl. items 2, 3 & 4) ASSEMBLY, Left Wheel (Incl. items 2, 3 & 4) RIM TIRE, 13 x 5.00 x 6 (Lug) VALVE, Air (Snap-In) PIN, 5/16” Self-Locking Cotter PIN, 5/16 x 1-11/16” Clevis Was 91677 Footnotes: INTERMEDIATE SERIES 3, 4 & 5 Manual No. 21 7006047 TP 400-5172-9-RT-N DECALS Manual No. 7006047 TP 400-5172-9-RT-N INTERMEDIATE 22 SERIES 3, 4 & 5 DECALS Item Part No 1 2 3 4 5 6 7071652 7074754 7071655 7071654 7071653 7074756 7015684 7043853 Qty Description Note DECAL, Ground Breaker (5HP) DECAL, Ground Breaker (5-1/2HP) DECAL, SNAPPER DECAL, 5HP Engine DECAL, Dash Panel (5HP) DECAL, Dash Panel (5-1/2HP) DECAL, Warning (Rotating Tines) DECAL, Safety Operating Instructions Footnotes: INTERMEDIATE SERIES 3, 4 & 5 Manual No. 23 7006047 TP 400-5172-9-RT-N DECALS (continued) Manual No. 7006047 TP 400-5172-9-RT-N INTERMEDIATE 24 SERIES 3, 4 & 5 DECALS (continued) Item Part No 7 8 9 10 11 12 13 14 7046534 7046919 7043854 7017682 7015408 7046994 7023043 7029470 Qty Description Note DECAL, Warning/Instructions DECAL, Starting and Warning DECAL, Warning/Starting Procedure DECAL, Engine Oil DECAL, Starting Procedure DECAL, Caution (Standing on end) DECAL, Caution (Standing on end) DECAL, Patent Numbers Footnotes: INTERMEDIATE SERIES 3, 4 & 5 Manual No. 25 7006047 TP 400-5172-9-RT-N DECALS (continued) Manual No. 7006047 TP 400-5172-9-RT-N INTERMEDIATE 26 SERIES 3, 4 & 5 DECALS (continued) Item Part No 15 16 17 18 19 20 21 22 7028700 7042837 7072134 7073339 7075378 7074548 7029776 7047040 7074760 Qty Description Note DECAL, Chute/Read Manual (Euro) DECAL, OPC Tiller (Euro) DECAL, Dash Panel (Euro) DECAL, OPEI Tiller DECAL, 2003 Year of Manufacture DECAL, 2002 Year of Manufacture DECAL, European Community DECAL, Chain Case Inspected By DECAL, Fuel Safety Tiller Footnotes: INTERMEDIATE SERIES 3, 4 & 5 Manual No. 27 7006047 TP 400-5172-9-RT-N DECALS (continued) Manual No. 7006047 TP 400-5172-9-RT-N INTERMEDIATE 28 SERIES 3, 4 & 5 DECALS (continued) Item Part No 23 24 25 26 27 28 7074814 7074815 7074816 7074817 7074820 7016134 Qty Description Note DECAL, Warning and Starting Instruction DECAL, Stop DECAL, Speed DECAL, Choke and Fuel DECAL, Engine On-Off DECAL, Caution Tag Footnotes: INTERMEDIATE SERIES 3, 4 & 5 Manual No. 29 7006047 TP 400-5172-9-RT-N CULTIVATOR SHIELD KIT Manual No. 7006047 TP 400-5172-9-RT-N INTERMEDIATE 30 SERIES 3, 4 & 5 CULTIVATOR SHIELD KIT Item Part No 1 2 3 4 5 6 7 8 7060865 7036266 7032724 7038397 7012431 7090803 7090911 7091294 7091597 Qty 2 2 1 2 1 2 1 2 Description Note KIT, Cultivator Shield CULTIVATOR, Shield BRACKET, Front Latch PIN, Drag Shield PIN, 1/4” Hair BOLT, 1/4-20 x 5/8” Flat Hd. Short Neck Carriage SCREW, 1/4-20 x 1-1/4” Hex Washer Self-Tap WASHER, 1/4” Flat PIN, 3/32 x 3/4” Cotter (Incl. items 1 thru 9) Was 90055 Was 90037 Footnotes: INTERMEDIATE SERIES 3, 4 & 5 Manual No. 31 7006047 TP 400-5172-9-RT-N HILLER - FURROWER KIT Manual No. 7006047 TP 400-5172-9-RT-N INTERMEDIATE 32 SERIES 3, 4 & 5 HILLER - FURROWER KIT Item Part No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 7060731 7047875 7047858 7047865 7032430 7035072 7036135 7036134 7090779 7090705 7091316 7090316 7090188 7091537 7091596 7013111 7091540 7091511 7080187 7040527 7013460 7038217 7090134 7090122 7090118 7091302 7014206 Qty 1 1 1 1 1 1 1 1 1 1 4 8 4 3 3 2 2 2 1 1 1 2 1 2 6 1 Description Note KIT, Hiller/Furrower BRACKET, Clevis DRAW-BAR STANDARD SKID-SHOE HILLER-FURROWER WING, Left Side Hiller WING, Right Side Hiller BOLT, 1/2-13 x 3-1/2” Sh. Neck. Carriage GR2 WASHER, 1/2” Flat NUT, 1/2-13 Hex GR5 or B BOLT, 5/16-18 X 3/4” Square Neck Carriage GR5 WASHER, 5/16” Flat WING-NUT, 5/16-18 PIN, 1/8” Hair PIN, 1/2 x 1” Clevis BOLT, 5/16-18 x 1-1/2” Hex Head Cap GR5 NUT, 5/16-18 Hex GR5 or B WASHER, 5/16” Split Lock BRACKET, Mounting (Front Tine Tiller only) PIN, 3/8 x 1-1/2” Clevis (Front Tine Tiller only) SUPPORT, Clevis SCREW, 3/8-16 x 3/4” Hex Head Cap GR5 WASHER, 3/8” Flat WASHER, 3/8” Split Lock NUT, 3/8-16 Hex GR5 or B SPACER (not shown) (Incl. items 1 thru 26) Was 90258 Was 90492 Was 13844 Was 90211 Was 90196 Was 90130 Footnotes: INTERMEDIATE SERIES 3, 4 & 5 Manual No. 33 7006047 TP 400-5172-9-RT-N Parts Manual for INTERMEDIATE REAR TINE TILLERS SERIES 3, 4 & 5 IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY. McDonough, GA, 30253 U.S.A. COPYRIGHT © 2006 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Manual No. Revision 9, 2/28/2006 7006047 TP 400-5172-9-RT-N