Download Snapper 2438 User's Manual

Attachment
Illustrated
Parts List
MANUFACTURING, INC.
500 N Spring Street / PO Box 997
Port Washington, WI 53074-0997 USA
© Copyright 2000 Simplicity Manufacturing, Inc.All Rights Reserved.
Rev. 10/2000
TP 400-2438-00-AT-SMA
Turbo Clean Sweep Twin Catcher - Cover & Bag Group
983952
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
36
38
37
39
40
34
1
41
5
4
35
3
2
33
11
6
8
32
11
10
7
8
15
9
12
17
30
16
13
31
14
25
29
26
27
21
22
20
23
28
19
18
24
The above parts group applies to the following Mfg. Nos.:
1691792 Turbo Clean Sweep Twin Catcher
© Copyright 2000 Simplicity Manufacturing, Inc. All Rights Reserved.
2
TP 400-2438-00-AT-SMA
Turbo Clean Sweep Twin Catcher - Cover & Bag Group
REF NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
PART NO.
1704615
1960381
1704075
1704135
1704508
1960399
1930642
1960096
1704507
1927428
1960077
1960252
1703822
1921966
1928352
1960221
1703700
1917372
1917356
1672023
1703807
1931333
1703855
1703764
1675707
1704057
1930531
1675043
1703853
1928919
960367
1910531
1667248
1704405
1704033
1704180
1933886
1705876
1921319
1960400
1704056
QTY.
1
7
1
1
3
1
5
2
1
2
2
5
1
4
4
2
1
4
4
2
2
4
2
2
2
1
2
4
1
2
2
4
6
1
1
2
1
1
1
1
1
DESCRIPTION
TUBE ASSEMBLY Support (Incl. Ref. Nos. 2, 3, 4, 5, 6, 8, 9 & 11)
RIVET, Pop
SUPPORT, Tube
SEAL, Cover
BRACKET, Seal
SCREW, Round Head, #8-32 x 7/8
LOCKNUT, Flange, 1/4-20
WASHER
STRAP, Tube Support
SCREW, Taptite, 1/4-20 x 3/8
NUT, Hex, Lock, #8-32
CARRIAGE BOLT, 1/4-20 x 5/8
CROSS ASSEMBLY.
CAPSCREW, Hex Head, 3/8-16 x 7/8
NUT, Hex, Whizlock, 3/8-16
CLIP, Hairpin
SCREEN
NUT, Hex, 5/16-18
LOCKWASHER, 5/16
CLAMP
HANGER
CARRIAGE BOLT, 5/16-18 x 3/4
HOOP, Bag
BAG, Grass
TUBE CLIP, Grass Bag
SEAL, Clip
SCREW, Truss Head, #10-32 x 1/2
RIVET, Pop
HANDLE, Latch
NUT, Hex, #10-32
PIN, Round Head
WASHER
CLIP, Canoe
DECAL, Safety
COVER
WINDOW
NUT, Speed
CABLE, Double Loop
WASHER, 1/4
SCREW, Self-tapping, #10-12 x 5/8
COVER ASSEMBLY (Incl. Ref. Nos. 17, 26, 28, 32, 37, 38, 39 & 40)
Footnotes:
The above parts group applies to the following Mfg. Nos.:
1691792 Turbo Clean Sweep Twin Catcher
TP 400-2438-00-AT-SMA
3
Turbo Clean Sweep Twin Catcher - Hitch Group
984020
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
1691792 Turbo Clean Sweep Twin Catcher
© Copyright 2000 Simplicity Manufacturing, Inc. All Rights Reserved.
4
TP 400-2438-00-AT-SMA
Turbo Clean Sweep Twin Catcher - Hitch Group
REF NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
PART NO.
1921977
1705072
1921210
1703844
1921959
1917356
1917372
1921319
1916964
1916622
1933468
1916950
1916965
1703846
1931335
QTY.
2
1
4
1
2
3
3
2
2
2
2
4
4
1
2
DESCRIPTION
CAPSCREW, Hex Head, 5/1 6-18 x 1-1/4
BRACE, Bar
CAPSCREW, Hex Head, 3/8-16 x 1
BRACKET, Lower
CAPSCREW, Hex Head, 1/4-20 x 5/8
LOCKWASHER, 5/16
NUT, Hex, 5/16-18
WASHER, 1/4
LOCKWASHER, 1/4
NUT, Hex, 1/4-20
WASHER, 5/16
NUT, Hex, 3/8-16
LOCKWASHER, 3/8
SUPPORT
CARRIAGE BOLT, 5/16-18 x 1
Footnotes:
The above parts group applies to the following Mfg. Nos.:
1691792 Turbo Clean Sweep Twin Catcher
TP 400-2438-00-AT-SMA
5
Turbo Clean Sweep Twin Catcher - Adapter, Blade & Tube Group
984017
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
1691792 Turbo Clean Sweep Twin Catcher
© Copyright 2000 Simplicity Manufacturing, Inc. All Rights Reserved.
6
TP 400-2438-00-AT-SMA
Turbo Clean Sweep Twin Catcher - Adapter, Blade & Tube Group
REF NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PART NO.
1704283
1933896
1960096
1704854
1960404
1924356
1704369
1916950
1916965
1922130
1930641
1960252
1910531
1705063
910542
1705112
QTY.
1
4
4
1
4
2
1
1
1
1
1
1
2
1
2
1
DESCRIPTION
TUBE, Upper
NUT, Hex, Nylock #10-24
WASHER, Flat
TUBE, Middle
SCREW, Truss Head, #10-24 x 3/4
WASHER
COVER ASSEMBLY, Belt
NUT, Hex, 3/8-16
LOCKWASHER, 3/8
CAPSCREW, Hex Head, 3/8-16 x 2-1/4
NUT, Hex Flange, 1/4-20
CARRIAGE BOLT, 1/4-20 x 3/4
WASHER
CLIP, Spring
RIVET
TUBE ASSEMBLY, Lower (Inc. Ref. Nos. 13, 14, & 15)
Footnotes:
The above parts group applies to the following Mfg. Nos.:
1691792 Turbo Clean Sweep Twin Catcher
TP 400-2438-00-AT-SMA
7
Hardware Identification & Torque Specifications
Common Hardware Types
Torque Specification Chart
Hex Head Capscrew
FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)
Washer
Hardware
Grade
Lockwasher
Carriage Bolt
No
Marks
SAE Grade 2
Hex Nut
Size Of
Hardware
Standard Hardware Sizing
8-32
8-36
10-24
10-32
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
3/8-24
7/16-14
7/16-20
1/2-13
1/2-20
9/16-12
9/16-18
5/8-11
5/8-18
3/4-10
3/4-16
7/8-9
7/8-14
1-8
1-12
When a washer or nut is identified as 1/2”, this is the
Nominal size, meaning the inside diameter is 1/2 inch; if a
second number is present it represent the threads per inch
When bolt or capscrew is identified as 1/2 - 16 x 2”, this
means the Nominal size, or body diameter is 1/2 inch; the
second number represents the threads per inch (16 in this
example, and the final number is the body length of the
bolt or screw (in this example 2 inches long).
The guides and ruler furnished below are designed to
help you select the appropriate hardware and tools.
0
1/4
Nut, 1/2”
1/2
Inside
Diameter
3/4
1
1/4
1/2
3/4
Screw, 1/2 x 2
2
1/4
Body
Diameter
in/lbs
ft/lbs
19
20
27
31
66
76
11
12
20
23
30
35
50
55
65
75
90
100
160
180
140
155
220
240
Nm.
2.1
2.3
3.1
3.5
7.6
8.6
15.0
16.3
27.2
31.3
40.8
47.6
68.0
74.8
88.4
102.0
122.4
136
217.6
244.8
190.4
210.8
299.2
326.4
SAE Grade 5
in/lbs
ft/lbs
30
31
43
49
8
10
17
19
30
35
50
55
75
90
110
120
150
180
260
300
400
440
580
640
SAE Grade 8
Nm.
in/lbs
ft/lbs
Nm.
3.4
3.5
4.9
5.5
10.9
13.6
23.1
25.8
40.8
47.6
68.0
74.8
102.0
122.4
149.6
163.2
204.0
244.8
353.6
408.0
544.0
598.4
788.8
870.4
41
43
60
68
12
14
25
27
45
50
70
80
110
120
150
170
220
240
386
420
600
660
900
1,000
4.6
4.9
6.8
7.7
16.3
19.0
34.0
34.0
61.2
68.0
95.2
108.8
149.6
163.2
204.0
231.2
299.2
326.4
525.0
571.2
816.0
897.6
1,244.0
1,360.0
NOTES
1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread forming
screws, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:
a. for prevailing torque locknuts - use 65% of grade 5
torques.
b. for flange whizlock nuts and screws - use 135% of
grade 5 torques.
3. Unless otherwise noted on assembly drawings, all torque
values must meet this specification.
1/2
Body
Length
3/4
3
1/4
1/2
3/4
4
Wrench & Fastener Size Guide
1/4
5/16
3/8
1/4” Bolt or Nut
Wrench—7/16”
5/16” Bolt or Nut
Wrench—1/2”
3/8” Bolt or Nut
Wrench—9/16”
7/16
DIA.
7/16” Bolt or Nut
Wrench (Bolt)—5/8”
Wrench (Nut)—11/16”
1/2
DIA.
1/2” Bolt or Nut
Wrench—3/4”