Download Snapper 3539 User's Manual

Attachment
Illustrated
Parts List
Attachment
Mfg. No.
Description
1694267
Quad Bagger Dump Cart
MANUFACTURING, INC.
500 N. Spring Street / PO Box 997
Port Washington, WI 53074-0997 USA
www.simplicitymfg.com
© Copyright 2003 Simplicity Manufacturing, Inc. All Rights Reserved. Printed In USA.
Rev. 12/2002
TP 400-3539-00-AT-SMA
Quad Bagger Dump Cart
986146
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
1
3
2
4
31
10
8
5
11
DE
CA
L
12
9
8
6
7
9
15
23
13
3
14
16
22
17
Hitch Prestige / 1800 / 2800 / GT Series &
Conquest / 1700 / 2700 / YT Series
18
21
33
20
Tractor Rear
Frame Wrapper
19
32
Hitch 23
Broadmoor / 1600 / 2600 Series
23
28
25
26
19
30
29
19
19
24
23
26
29
11
23
27
Rear Tractor Frame
The above parts group applies to the following Mfg. Nos.:
1694267 - Quad Bagger
© Copyright 2003 Simplicity Manufacturing, Inc. All Rights Reserved.
1
TP 400-3539-00-AT-SMA
Quad Bagger Dump Cart
REF NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
PART NO.
1708239
1703338
1930644
1703335
1700765
1920161
1917372
177649
1919326
1921977
1923114
1921958
1700768
1916964
1916622
1703336
176012
102004
1930651
1924940
1676892
1703334
1921210
1723888
1723887
1918431
1723884
1723885
1922134
1723883
*
1921176
1712288
QTY.
1
1
2
1
1
1
1
2
2
1
4
2
1
2
2
1
2
2
14
8
2
1
14
1
1
2
1
1
3
1
1
1
2
DESCRIPTION
TAILGATE
BOX, Cart
LOCKNUT, Two-Way, 1/2-13
BRACKET, Hinge, RH
HANDLE, Latch
NUT, Jam, 5/16-18
NUT, 5/16-18
WASHER, Compression, 5/16
WASHER, 5/16
CAPSCREW, 5/16-18 x 1-1/4
CAPSCREW, Hex Head, 1/2-13 x 1
CAPSCREW, Hex Head, 1/4-20 x 1/2
HANDLE, Lift
LOCKWASHER, 1/4
NUT, 1/4-20
FRAME
SAFETY CLIP
PIN, Round Head, 1/2 x 1-1/2
LOCKNUT, Center Lock, 3/8-16
WASHER, 3/8
WHEEL ASSEMBLY, (Includes Item # 31)
BRACKET, Hinge, LH
CAPSCREW, 3/8-16 x 1
BRACKET, Hitch, LH
BRACKET, Hitch, RH
WASHER, 1/2
ADAPTER, Hitch, LH
ADAPTER, Hitch, RH
LOCKNUT, Center Lock, 1/2-13
HITCH
DECAL, No Riders, Max. Weight 300 Lbs.
CAPSCREW, Hex Head, 1/2-13 x 1-1/4
BEARING, Wheel
Footnotes
* Not a Service Part.
The above parts group applies to the following Mfg. Nos.:
1694267 - Quad Bagger
© Copyright 2003 Simplicity Manufacturing, Inc. All Rights Reserved.
2
TP 400-3539-00-AT-SMA
Hardware Identification & Torque Specifications
Common Hardware Types
Torque Specification Chart
Hex Head Capscrew
FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)
Washer
Hardware
Grade
Lockwasher
Carriage Bolt
No
Marks
SAE Grade 2
Hex Nut
Size Of
Hardware
Standard Hardware Sizing
8-32
8-36
10-24
10-32
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
3/8-24
7/16-14
7/16-20
1/2-13
1/2-20
9/16-12
9/16-18
5/8-11
5/8-18
3/4-10
3/4-16
7/8-9
7/8-14
1-8
1-12
When a washer or nut is identified as 1/2”, this is the
Nominal size, meaning the inside diameter is 1/2 inch; if a
second number is present it represent the threads per inch
When bolt or capscrew is identified as 1/2 - 16 x 2”, this
means the Nominal size, or body diameter is 1/2 inch; the
second number represents the threads per inch (16 in this
example, and the final number is the body length of the
bolt or screw (in this example 2 inches long).
The guides and ruler furnished below are designed to
help you select the appropriate hardware and tools.
0
1/4
Nut, 1/2”
1/2
Inside
Diameter
3/4
1
1/4
1/2
3/4
Screw, 1/2 x 2
2
1/4
Body
Diameter
in/lbs
ft/lbs
19
20
27
31
66
76
11
12
20
23
30
35
50
55
65
75
90
100
160
180
140
155
220
240
Nm.
2.1
2.3
3.1
3.5
7.6
8.6
15.0
16.3
27.2
31.3
40.8
47.6
68.0
74.8
88.4
102.0
122.4
136
217.6
244.8
190.4
210.8
299.2
326.4
SAE Grade 5
in/lbs
ft/lbs
30
31
43
49
8
10
17
19
30
35
50
55
75
90
110
120
150
180
260
300
400
440
580
640
SAE Grade 8
Nm.
in/lbs
ft/lbs
Nm.
3.4
3.5
4.9
5.5
10.9
13.6
23.1
25.8
40.8
47.6
68.0
74.8
102.0
122.4
149.6
163.2
204.0
244.8
353.6
408.0
544.0
598.4
788.8
870.4
41
43
60
68
12
14
25
27
45
50
70
80
110
120
150
170
220
240
386
420
600
660
900
1,000
4.6
4.9
6.8
7.7
16.3
19.0
34.0
34.0
61.2
68.0
95.2
108.8
149.6
163.2
204.0
231.2
299.2
326.4
525.0
571.2
816.0
897.6
1,244.0
1,360.0
NOTES
1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread forming
screws, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:
a. for prevailing torque locknuts - use 65% of grade 5
torques.
b. for flange whizlock nuts and screws - use 135% of
grade 5 torques.
3. Unless otherwise noted on assembly drawings, all torque
values must meet this specification.
1/2
Body
Length
3/4
3
1/4
1/2
3/4
4
Wrench & Fastener Size Guide
1/4
5/16
3/8
1/4” Bolt or Nut
Wrench—7/16”
5/16” Bolt or Nut
Wrench—1/2”
3/8” Bolt or Nut
Wrench—9/16”
7/16
DIA.
7/16” Bolt or Nut
Wrench (Bolt)—5/8”
Wrench (Nut)—11/16”
1/2
DIA.
1/2” Bolt or Nut
Wrench—3/4”