Download Snapper 4084 User's Manual
Transcript
Attachment Illustrated Parts List Attachment Mfg. No. Description 7063344 Vacuum Hose Kit, Leaf Blower MANUFACTURING, INC. 500 N. Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA www.simplicitymfg.com © Copyright 2004 Simplicity Manufacturing, Inc. All Rights Reserved. Printed In USA. Rev. 04/2004 TP 400-4084-00-AT-SMA Illustrated Parts List 74\63344kit NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 7063344 - Vacuum Hose Kit © Copyright 2004 Simplicity Manufacturing, Inc. All Rights Reserved. 1 TP 400-4084-00-AT-SMA Illustrated Parts List REF NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 PART NO. 7023645 7072434 7072435 7072436 7075893 7075957 7075958 7075959 7076978 7091310 7091776 7091814 1023100 1024100 1026100 1028100 1030100 QTY. 2 1 1 1 1 1 1 1 5 2 4 1 1 1 1 1 1 DESCRIPTION PIN, 3/16 x 1-1/2 Clevis ROD, Hose/Handle Holder BRACKET, Upper Hose Clamp HOSE, 8 inch Diameter x 8 feet Long DECAL, Personal Protection BRACKET, Inlet Shutoff BRACKET, Lower Hose Clamp BRACKET, Hose Clamp Support NUT, 1/4-20 Hex Nyloc HAIR PIN, #13 CARRIAGE BOLT, 1/4-20 x 3/4, GR5 CAPSCREW, 1/4-20 x 1-1/4 Hex Head COUPLER, Hose (Plastic) RING, Shut Off (Plastic) HANDLE GRIP, Handle (Black Vinyl) NOZZLE, Vacuum (Plastic) Footnotes The above parts group applies to the following Mfg. Nos.: 7063344 - Vacuum Hose Kit © Copyright 2004 Simplicity Manufacturing, Inc. All Rights Reserved. 2 TP 400-4084-00-AT-SMA Hardware Identification & Torque Specifications Common Hardware Types Torque Specification Chart Hex Head Capscrew FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%) Washer Hardware Grade Lockwasher Carriage Bolt No Marks SAE Grade 2 Hex Nut Size Of Hardware Standard Hardware Sizing 8-32 8-36 10-24 10-32 1/4-20 1/4-28 5/16-18 5/16-24 3/8-16 3/8-24 7/16-14 7/16-20 1/2-13 1/2-20 9/16-12 9/16-18 5/8-11 5/8-18 3/4-10 3/4-16 7/8-9 7/8-14 1-8 1-12 When a washer or nut is identified as 1/2”, this is the Nominal size, meaning the inside diameter is 1/2 inch; if a second number is present it represent the threads per inch When bolt or capscrew is identified as 1/2 - 16 x 2”, this means the Nominal size, or body diameter is 1/2 inch; the second number represents the threads per inch (16 in this example, and the final number is the body length of the bolt or screw (in this example 2 inches long). The guides and ruler furnished below are designed to help you select the appropriate hardware and tools. 0 1/4 Nut, 1/2” 1/2 Inside Diameter 3/4 1 1/4 1/2 3/4 Screw, 1/2 x 2 2 1/4 Body Diameter in/lbs ft/lbs 19 20 27 31 66 76 11 12 20 23 30 35 50 55 65 75 90 100 160 180 140 155 220 240 Nm. 2.1 2.3 3.1 3.5 7.6 8.6 15.0 16.3 27.2 31.3 40.8 47.6 68.0 74.8 88.4 102.0 122.4 136 217.6 244.8 190.4 210.8 299.2 326.4 SAE Grade 5 in/lbs ft/lbs 30 31 43 49 8 10 17 19 30 35 50 55 75 90 110 120 150 180 260 300 400 440 580 640 SAE Grade 8 Nm. in/lbs ft/lbs Nm. 3.4 3.5 4.9 5.5 10.9 13.6 23.1 25.8 40.8 47.6 68.0 74.8 102.0 122.4 149.6 163.2 204.0 244.8 353.6 408.0 544.0 598.4 788.8 870.4 41 43 60 68 12 14 25 27 45 50 70 80 110 120 150 170 220 240 386 420 600 660 900 1,000 4.6 4.9 6.8 7.7 16.3 19.0 34.0 34.0 61.2 68.0 95.2 108.8 149.6 163.2 204.0 231.2 299.2 326.4 525.0 571.2 816.0 897.6 1,244.0 1,360.0 NOTES 1. These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews. 2. Recommended seating torque values for locknuts: a. for prevailing torque locknuts - use 65% of grade 5 torques. b. for flange whizlock nuts and screws - use 135% of grade 5 torques. 3. Unless otherwise noted on assembly drawings, all torque values must meet this specification. 1/2 Body Length 3/4 3 1/4 1/2 3/4 4 Wrench & Fastener Size Guide 1/4 5/16 3/8 1/4” Bolt or Nut Wrench—7/16” 5/16” Bolt or Nut Wrench—1/2” 3/8” Bolt or Nut Wrench—9/16” 7/16 DIA. 7/16” Bolt or Nut Wrench (Bolt)—5/8” Wrench (Nut)—11/16” 1/2 DIA. 1/2” Bolt or Nut Wrench—3/4”