Download Snapper 3545 User's Manual

ATTACHMENT
ILLUSTRATED
PARTS LIST
ATTACHMENT
Mfg. No. Description
1694305
Turbo Mounting Kit 38” Mower
MANUFACTURING, INC.
500 N Spring Street / PO Box 997
Port Washington, WI 53074-0997 USA
www.simplicitymfg.com
© Copyright 2002 Simplicity Manufacturing, Inc.All Rights Reserved.
Rev. 09/2002
TP 400-3545-00-AT-SMA
Turbo Mounting Kit - 38” Mower
986209
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
11
36
8
9
Torque to
55-70 ft. lbs.
12
Existing
Washer
10
1
Existing
Pulley & Nut
13
New Broadmoor Series
15
14
20
16
17
Old Broadmoor Series
23
21
14
7
19
6
2
18
24
22
11
12
5
25
26
27
4
3
28
35
29
34
11
12
Existing
Hardware
33
32
31
30
The above parts group applies to the following Mfg. Nos.:
1694305 Turbo Mounting Kit - 38” Mower
© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.
2
TP 400-3545-00-AT-SMA
Turbo Mounting Kit - 38” Mower
REF NO.
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
PART NO.
QTY.
1705141
1724372
1704983
1960520
1931333
1722546
1931277
1960404
1933896
1718295
1704789
1917372
1917356
1921971
1924940
1714817
1704768
172845
1916965
1916950
1713621
1713091
1713624
1679163
1923362
1924856
1724370
1705064
1919381
1960318
1960223
1704881
1666294
1705308
1930600
1713540
1724371
1
1
1
1
2
1
2
4
4
1
1
4
4
1
2
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
2
1
1
DESCRIPTION
V-BELT, Old Broadmoor Series (Short)
V-BELT, New Broadmoor Series (Long)
MOUNTING BRACKET
PAL NUT, 5/8
CARRIAGE BOLT, 5/16-18 x 3/4
PIVOT ASSEMBLY
NUT, Hex, Flange, Whizlock, 5/16-18
CAPSCREW, Truss Head, #10-24 x 3/4
NUT, Nylock, #10-24
ROD, Deflector
BELT GUIDE, Turbo
NUT, Hex, 5/16-18
LOCKWASHER, 5/16
CAPSCREW, Hex Head, 3/8-16 x 1-1/4
WASHER, Flat, 3/8
IDLER PULLEY
BRACKET, Idler
BELT STOP
LOCKWASHER, 3/8
NUT, Hex, 3/8-16
SPACER, Short, Splined
PULLEY ASSEMBLY
SPACER, Long
NUT, Wing, 5/16
NUT, Hex, Center Lock, 5/16-18
CAPSCREW, Taptite, 5/16-18 x 1/2
BRACE
SPRING LATCH
WASHER, Flat
CAPSCREW, Hex Head, 5/16-18 x 2-1/2
CARRIAGE BOLT, 5/16-18 x 1-1/4
BRACKET ASSEMBLY
SPACER
BRACKET, "L"
CAPSCREW, Hex Head Taptite, 5/16-18 x 1-1/2
ROLLER
DEFLECTOR
Footnotes:
The above parts group applies to the following Mfg. Nos.:
1694305 Turbo Mounting Kit - 38” Mower
TP 400-3545-00-AT-SMA
3
Hardware Identification & Torque Specifications
Common Hardware Types
Torque Specification Chart
Hex Head Capscrew
FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)
Washer
Hardware
Grade
Lockwasher
Carriage Bolt
No
Marks
SAE Grade 2
Hex Nut
Size Of
Hardware
Standard Hardware Sizing
8-32
8-36
10-24
10-32
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
3/8-24
7/16-14
7/16-20
1/2-13
1/2-20
9/16-12
9/16-18
5/8-11
5/8-18
3/4-10
3/4-16
7/8-9
7/8-14
1-8
1-12
When a washer or nut is identified as 1/2”, this is the
Nominal size, meaning the inside diameter is 1/2 inch; if a
second number is present it represent the threads per inch
When bolt or capscrew is identified as 1/2 - 16 x 2”, this
means the Nominal size, or body diameter is 1/2 inch; the
second number represents the threads per inch (16 in this
example, and the final number is the body length of the
bolt or screw (in this example 2 inches long).
The guides and ruler furnished below are designed to
help you select the appropriate hardware and tools.
0
1/4
Nut, 1/2”
1/2
Inside
Diameter
3/4
1
1/4
1/2
3/4
Screw, 1/2 x 2
2
1/4
Body
Diameter
in/lbs
ft/lbs
19
20
27
31
66
76
11
12
20
23
30
35
50
55
65
75
90
100
160
180
140
155
220
240
Nm.
2.1
2.3
3.1
3.5
7.6
8.6
15.0
16.3
27.2
31.3
40.8
47.6
68.0
74.8
88.4
102.0
122.4
136
217.6
244.8
190.4
210.8
299.2
326.4
SAE Grade 5
in/lbs
ft/lbs
30
31
43
49
8
10
17
19
30
35
50
55
75
90
110
120
150
180
260
300
400
440
580
640
SAE Grade 8
Nm.
in/lbs
ft/lbs
Nm.
3.4
3.5
4.9
5.5
10.9
13.6
23.1
25.8
40.8
47.6
68.0
74.8
102.0
122.4
149.6
163.2
204.0
244.8
353.6
408.0
544.0
598.4
788.8
870.4
41
43
60
68
12
14
25
27
45
50
70
80
110
120
150
170
220
240
386
420
600
660
900
1,000
4.6
4.9
6.8
7.7
16.3
19.0
34.0
34.0
61.2
68.0
95.2
108.8
149.6
163.2
204.0
231.2
299.2
326.4
525.0
571.2
816.0
897.6
1,244.0
1,360.0
NOTES
1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread forming
screws, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:
a. for prevailing torque locknuts - use 65% of grade 5
torques.
b. for flange whizlock nuts and screws - use 135% of
grade 5 torques.
3. Unless otherwise noted on assembly drawings, all torque
values must meet this specification.
1/2
Body
Length
3/4
3
1/4
1/2
3/4
4
Wrench & Fastener Size Guide
1/4
5/16
3/8
1/4” Bolt or Nut
Wrench—7/16”
5/16” Bolt or Nut
Wrench—1/2”
3/8” Bolt or Nut
Wrench—9/16”
7/16
DIA.
7/16” Bolt or Nut
Wrench (Bolt)—5/8”
Wrench (Nut)—11/16”
1/2
DIA.
1/2” Bolt or Nut
Wrench—3/4”