Download SimWatch SSW-01 Instruction Manual

SIMWATCH SSW01 -Smartwatch Manual
SIMWATCH SSW01
Warning :
W atch band dam age caused by excessive bending is not
covered by the lim ited hardware warranty!
1
Smartwatch Overview
Smartwatch Overview
Overview of the Smartwatch
The SIM watch 5 m odelcontains the following com ponents.
The telescoping stylus is stored in the watchband, just above the screen.
us
l
Sty
Features List
• Fully functioning phone
• SM S and M M S capability
• Internet connection, through W AP
1.2.1
• Two W ay Com m unication with
Sm artphone
• M P3 / M P4 Player
• Front facing cam era, with 3x zoom
function
• Video recorder
2
•
•
•
•
•
•
•
•
•
Task list
Alarm clock
Calculator
Bluetooth capability
Phone book for up to 500
num bers
Call history
Scratch resistant touch pad
M icro SD card slot
Vibrate function
SIMWATCH SSW01 -Smartwatch Manual
•
•
•
•
•
Audio recorder
Voice recorder
Im age viewer
File m anager
O rganizer
• M ultiple languages available
Watch Faces
Regular Watch Display
Default
Analog clock
Digital Watch Display
Signal strength
Alarm settings
Battery life
Date inform ation
Links to telephone dialing pad, m ain m enu and contact
list
Smartwatch Features: Screen 1
M ultim edia: cam era, Im age
viewer, audio player, video
player, and sound recording
Smartwatch Features: Screen 2
SM S
3
Smartwatch Overview
Smartwatch Features: Screen 3
Bluetooth
Smartwatch Features: Screen 4
Two W ay Com m unication
Smartwatch Features: Screen 5
Silent m ode
Smartwatch Features: Screen 6
O rganizer: File m anager, calculator, tasks, alarm .
Profiles
Settings: pen calibration, phone settings, network settings,
security settings, call settings, restore factory settings
Call History
Smartwatch Features: Screen 7
FM Radio
Phonebook
Calendar
Services: internet service and data
account
4
SIMWATCH SSW01 -Smartwatch Manual
First Time Use
Insert a SIM Card
The Sm artwatch allows you to store phone contact inform ation on your
phone itself or on a rem ovable SIM card. To insert a SIM card into the
Sm artwatch, do the following:
1.
Switch off the Sm artwatch by pressing and holding the power button
until the screen shuts off.
2.
3.
4.
Turn the watch over and rem ove the back plate.
O pen the larger of the two silver m etal guards by gently lifting up on the
right side.
Insert the SIM card into the slot.
5.
6.
Flip down the silver m etal cover.
Replace the back plate.
Insert a Micro SD Card
The Sm artwatch allows you to store m usic, videos, audio recordings, and
other data on your phone or on a rem ovable m icro SD card up to 16G B. To
insert a m icro SD card into the Sm artwatch, do the following:
1.
Switch off the Sm artwatch by pressing and holding the power button
until the screen goes dark.
2.
3.
Turn the watch over and rem ove the back plate.
O pen the sm aller of the two silver m etal guards by gently lifting up on
the right side.
Insert the m icro SD card into the slot.
4.
5
First Time Use
5.
6.
Flip down the silver m etal cover.
Replace the back plate.
Note: Micro SD card is not included. Micro SD card is recom m ended to enjoy all the
functions in theSmartwatch.
Charge the Battery
The Sm artwatch digital display screen tells you how of a charge is left in the
battery.
0% rem aining
50% rem aining
100% (Fully charged)
To charge the Sm artwatch battery, do the following:
1.
O pen the hinge m arked USB on the side of the watch.
2.
3.
Insert the sm aller end of the USB cable that cam e with the watch.
Insert the larger end of the cable into a USB port on your com puter or
laptop.
6
SIMWATCH SSW01 -Smartwatch Manual
Turn Phone On/Off
To turn the phone on or off, press and hold the O n/O ff button on the side of
the watch.
Calibrate the Touchscreen
In order for the touchscreen on your Sm artwatch to work correc tly, you m ust
calibrate it before your initial use. To ensure the best perform ance of your
Sm artwatch, you should re-calibrate the touchscreen about every two weeks
after that.
To calibrate the touch screen, do the following:
1.
2.
3.
4.
5.
Using the Sm artwatch stylus, tap the
(M enu) button on the m ain
digital screen.
Tap the>>(Forward) button in the lower left corner of the screen 4
tim es.
Tap the ‘Settings’ option in the bottom left corner of the screen.
Tap the ‘Pen Calibration’ option in the top left corner of the screen.
Follow the prom pts that are displayed on the screen.
Calibration is com plete when a green checkm ark appears on the screen
with the word ‘Done’ underneath it.
7
First Time Use
Watch Display
W hen you tap the default (analog) watch face, the digital watch face
appears, displaying the following phone-related icons at the top:
Signal strength
New text m essage (SM S)
Vibrate and ring
Vibrate then ring
Vibrate only
Ring
Alarm O n
Bluetooth O n
Bluetooth connected
Headset inserted
M issed call
Battery strength
To access the interactive phone features of the Sm artwatch, do the
following:
Tap the
num ber.
button to access the telephone num ber pad to dial a phone
Tap the
button to access your Contact list.
Tap the
button to access all of the other features of the Sm artwatch.
8
SIMWATCH SSW01 -Smartwatch Manual
Smartwatch Features
Make and Manage Calls
Make a Call by Dialing a Number
To m ake a call, do the following:
1.
2.
Tap the default (analog) watch display.
Press the Dial button on the side of the Sm artwatch, or the ‘phone’ icon
in the lower left corner of the screen.
2.
3.
Tap out the telephone num ber you want to call.
Tap the green ‘call’ button in the top left corner of the screen to initiate
the call.
Make a Call by Selecting a Contact
To m ake a call by selecting a contact, do the following:
1.
Tap the default (analog) watch display.
2.
3.
4.
5.
O n the digital watch display that appears, tap the
(Phone) button.
Tap the Contacts button in the center of the top row on the screen.
Tap the nam e of the contact you want to call.
In the m enu that appears, tap ‘Call’ to call the contact.
Make a Call by Selecting a Recently Dialed Number
To m ake a call by selecting a recently dialed num ber, do the following:
1.
Tap the default (analog) watch display.
2.
3.
O n the digital watch display that appears, tap the
(Phone) button.
Tap the green ‘call’ button in the top left corner of the screen.
9
Smartwatch Features
4.
5.
In the list of recently dialed num bers that appears, tap the nam e of the
person you want to call.
In the m enu that appears, tap ‘Call’.
Answer a Call
To answer an incom ing call, tap the ‘O ptions’ button that appears on the
screen and the call will be connected autom atically.
Reject an Incoming Call
To reject an incom ing call, tap the ‘Reject’ button that appears on the
screen as the person is calling.
End a Call
To hang up at the end of a call, press the ‘End Call’ button on the side of
the Sm artwatch.
Check Voicemail
W hen you m iss a call and som eone leaves a m essage on your Sm artwatch,
a "New voicem ail" graphic will appear on the display screen. To check your
voicem ail, do the following:
1.
2.
3.
Tap the ‘New voicem ail’ graphic.
Tap the ‘Back’ button.
Tap the ‘Back’ button again.
4.
5.
Tap the
(Phone) button.
Press and hold the 1 key on the keypad and the voicem ail m essage will
begin playing.
Note: To view the num ber keypad as the m essage is playing, tap the phone
icon in the bottom center of the screen. W ith the keypad visible and the
m essage playing, you can do any of the following:
•
•
•
•
•
Tap
Tap
Tap
Tap
Tap
7
9
4
5
6
to
to
to
to
to
delete the current m essage.
save it in the archives.
replay the m essage.
hear the envelope inform ation for the m essage.
send a copy of the m essage to som eone else with your rem arks.
10
SIMWATCH SSW01 -Smartwatch Manual
View Voicemail Call Details
To view details about a voicem ail call, do the following:
1.
2.
3.
4.
Tap
Tap
Tap
Tap
the ‘New voicem ail’ graphic.
the ‘View’ button.
the nam e of the person who called.
View to see the following inform ation:
l
The type of call
l
The nam e of the caller
l
The calling num ber
l
The tim e and date of the call
l
The duration of the call
l
The total num ber of tim es the person called.
Adjust the Volume During a Call
To adjust the volum e during a call, do the following:
1.
2.
3.
Tap the ‘O ption’ button.
In the m enu that appears, tap the ‘Volum e’ option.
Increase the volum e by tapping the + button or decrease it by tapping
the – button.
Manage Call Waiting
To m anage call waiting, do the following:
1.
2.
Tap the ‘O ption’ button.
In the m enu that appears, tap the Hold ‘single call’ option.
Add a Phone Number to Your Blacklist
You can block calls from specific num bers by adding them to the blacklist
on your phone. To add a num ber to your blacklist, do the following:
1.
Tap the default (analog) watch display.
2.
3.
4.
O n the digital watch display that appears, tap
(Phone) button.
Tap the green ‘call’ button in the top left corner of the screen.
In the list of recently dialed num bers that appears, tap the nam e of the
person whose num ber you want to add to your blacklist.
In the m enu that appears, tap ‘Add to Blacklist’.
Tap the ‘Yes’ to confirm your decision.
5.
6.
11
Smartwatch Features
Manage Contacts
All of the features listed in this section are available through the Contacts
m enu on the Sm artwatch. To access the Contacts m enu, do the following:
1.
2.
Tap the default (analog) watch display.
Tap the Contacts button in the lower right corner of the screen.
View Your Contact List
To view your Contacts List, do the following:
1.
2.
Tap the ‘Contacts’ m enu.
O n the Contacts screen that appears, tap the ˄ and ˅ buttons to scroll
up and down through the list.
Add a Contact
To add a contact to your Contacts list, do the following:
1.
2.
3.
5.
6.
7.
Tap the ‘Contacts’ m enu.
Tap the ‘Add new contact’ option at the top of the screen.
Enter the nam e of the contact.
Tap the ˅ button to go to #2,
Enter the num ber of the contact.
Tap the ˅ button to go to #3.
Note: If you are im porting the contact instead of entering it m anually,
skip Steps 3 to 5 and tap the ˅ button to go to #3.
8.
(O ptional) Enter the em ail address of the contact
9.
Tap the ˅ button to go to #4,.
10.
11.
12.
13.
14.
(O ptional) Select a picture of the contact.
Tap the ˅ button to go to #5.
(O ptional) Select the ringtone you want to associate with the new
contact.
Tap the ‘O ptions’ button at the bottom right corner of the screen to
input m ore inform ation.
Tap ‘O ptions’ and then select‘Save’ to add the contact to the list.
12
SIMWATCH SSW01 -Smartwatch Manual
Edit a Contact
To edit a contact's details in your Contacts list, do the following:
1.
2.
3.
4.
5.
6.
Tap the ‘Contacts’ m enu.
Tap the nam e of the contact whose inform ation you want to edit.
Select‘O pitons’ and then select‘Edit’ from the m enu that appears.
Use the ˅ button to m odify the nam e of the contact, the contact's
num ber,the contacts em ail address and/or the ringtone that
accom panies their calls.
W hen you are done, tap the ‘O ptions’ button at the bottom right corner
of the screen.
Tap ‘O kay’ and then tap ‘Yes’ to confirm that you want to save your
changes.
Delete a Contact
To delete a contact from your Contacts list, do the following:
1.
2.
3.
4.
Tap the ‘Contacts’ m enu.
Tap the nam e of the contact you want to delete.
Select ‘Delete’from the m enu that appears.
Tap‘Yes’ to confirm that you want to delete the contact.
Send a Text Message to a Contact
To send a text m essage to a contact via the Contacts screen, do the
following:
1.
2.
3.
4.
5.
Tap the
Tap the
Tap the
Use the
Tap the
want to
‘Contacts’ m enu.
nam e of the contact you will be sending a text m essage to.
‘Send text m essage’ option in the list that appears.
stylus to com pose your m essage.
‘O ptions’ button and then click the nam e of the contact you
send the text m essage to.
Send a Multimedia Message to a Contact
To send a m ultim edia m essage to a contact via the Contacts screen, do the
following:
1.
2.
3.
4.
5.
Tap the
Tap the
to.
Tap the
Use the
Tap the
want to
‘Contacts’ m enu.
nam e of the contact you will be sending a m ultim edia m essage
‘Send m ultim edia m essage’ option in the list that appears.
stylus to com pose your m essage.
‘O ptions’ button and then click the nam e of the contact you
send the M ultim edia M essage to.
Send a Contact's Details
The Sm artwatch allows you to send a contact's details to a contact as an
SM S m essage or an M M S m essage or directly to Bluetooth device. To send
the details, do the following:
1.
Tap the Contacts m enu.
13
Smartwatch Features
2.
3.
4.
Tap the nam e of the contact whose inform ation you want to send.
Select ‘Send contact’ from the list that appears.
Select from one of the following options, then follow the prom pts that
appear:
l
As text m essage
l
As m ultim edia m essage
l
Via Bluetooth – If you select this option, you will be asked to confirm
that your Bluetooth device is on. If the Sm artwatch is unable to
detect the device, a Search new device button will be displayed.
Add a Contact to Your Blacklist
To add a contact to your Blacklist, do the following:
1.
2.
3.
4.
Tap the Contacts m enu.
Tap the nam e of the contact whose num ber you want to add to your
blacklist.
Select ‘Add to Blacklist’ from the m enu that appears.
Tap ‘Yes’ to confirm that you want to add the contact to the list.
Copy a Contact or All Contacts
To copy a single contact's details to your phone or to your SIM card, do the
following:
1.
2.
3.
4.
5.
Tap
Tap
Tap
Tap
Tap
the Contacts m enu.
the nam e of the contact whose inform ation you want to copy.
‘Copy’ from the list that appears.
‘To phone’ to copy the contact details to your phone.
‘Yes’ to confirm that you want to copy the contact.
To copy all of your contacts to your phone or to your SIM card, do the
following:
1.
2.
3.
4.
5.
6.
7.
Tap
Tap
Tap
Tap
Tap
Tap
Tap
the Contacts option.
the O ptions button.
‘Phonebook settings’ from the list that appears.
‘Copy contacts’ from the list that appears.
either ‘SIM to phone’ or ‘Phone to SIM ’.
‘O K’.
‘Yes’ to confirm that you want to copy all of your contacts.
Move a Contact or All Contacts
To m ove a single contact's details to your phone or to your SIM card, do the
following:
1.
2.
3.
4.
Tap the Contacts m enu.
Tap the nam e of the contact whose inform ation you want to m ove.
Select ‘M ove’ from the list that appears.
Tap ‘Yes’ to confirm that you want to m ove the contact.
To m ove all of your contacts to your phone or to your SIM card, do the
following:
1.
Tap the Contacts m enu.
14
SIMWATCH SSW01 -Smartwatch Manual
2.
3.
4.
5.
6.
Tap
Tap
Tap
Tap
Tap
the O ptions button.
‘Phonebook settings’ from the list that appears.
‘M ove contacts’ from the list that appears.
either ‘SIM to phone’ or ‘Phone to SIM ’.
‘Yes’ to confirm that you want to m ove all of your contacts.
Create a Caller Group
To create a caller group, do the following:
1.
2.
3.
4.
5.
6.
7.
8.
9.
Tap the ‘Contacts’ m enu.
Tap the ‘O ptions’ button.
Select ‘G roups’ from the list that appears.
Tap the ‘Add new group’ option.
Tap ‘G roup nam e’.
Use the stylus to type out the nam e of the caller group.
Tap the O ptions button.
Select ‘Done’ to save the new caller group.
Tap ‘Yes’ to confirm that you want to create the new caller group
Modify a Caller Group
To m odify a caller group, do the following:
1.
2.
3.
4.
5.
Tap the Contact option.
Tap the nam e of any contact in the list.
Select Caller groups from the list that appears.
Tap the nam e of the caller group you want to m odify.
Select from the following options:
l
Tap ‘View m em bers’ to view and add new m em bers.
l
Tap‘Delete’ to delete the caller group.
l
Tap ‘Delete all’ to delete all caller groups.
Manage SMS
All of the features listed in this section are available through the SM S m enu
on the Sm artwatch. To access the SM S m enu, do the following:
1.
Tap the default (analog) watch display.
2.
3.
O n the digital watch display that appears, tap the
(M enu) button.
Tap the >> (Forward) button in the lower left corner of the screen
Tap the ‘M essaging’ m enu that appears.
15
Smartwatch Features
Compose an SMS Message
To create an SM S m essage, do the following:
1.
2.
3.
4.
5.
6.
7.
8.
9.
Tap the ‘M essaging’ m enu.
Tap the ‘W rite m essage’ option in the top left corner of the screen.
Select ‘Text M essage’.
TIP:Tap the “O ption”key to change the input m ethod. See Change the
Input M ethod below for m ore details on this feature.
Com pose the text m essage you want to send.
Tap the ‘O ptions’ button.
In the m enu that appears, tap the ‘Send to’ option.
Enter the recipient's num ber m an ually or select it using the ‘Add from
Phonebook’ option.
Tap the ‘O ptions’ button again.
Tap ‘O K’ to send the m essage.
Com pose an M M S m essage
1.
2.
3.
4.
5.
6.
7.
8.
Tap the ‘M essaging’ m enu.
Tap the ‘W rite m essage’ option in the top left corner of the screen.
Com pose the text m essage and insert the m ultim edia file you want to
send.
Tap the ‘O ptions’ button.
In the m enu that appears, tap the ‘Send to’ option.
Enter the recipient's num ber m anually or select it using the ‘Add from
Phonebook’ option.
Tap the ‘O ptions’ button again.
Tap ‘O K’ to send the m essage.
W arning: M M S and SM S will be saved in the Phone m em ory only.
Go to Your Inbox
To view your m essage inbox, do the following:
1.
2.
Tap the ‘M essaging’ m enu.
Tap the ‘Inbox’ option.
View and Manage Sent Messages
To view and m anage your sent m essages, do the following:
1.
2.
3.
4.
Tap
Tap
Tap
Tap
the‘M essaging’ m enu.
the ‘Sent m essages’ option in the bottom left corner of the screen.
any m essage to access it.
the ‘O ptions’ m enu to access the following m essage-related options:
l
View
l
Reply
l
Call sender
l
Forward
l
Delete
l
Delete all
16
SIMWATCH SSW01 -Smartwatch Manual
View Draft Messages
To view your draft m essages, do the following:
1.
2.
Tap the‘M essaging’m enu.
Tap the Drafts option in the bottom right corner of the screen.
Change the Input Method
Note: The following instructions explain how to change the input m ethod
for a specific SM S m essage as you are creating it. To change the default
input m ethod of the system , refer to the Settings section of this guide.
Changing the Input M ethod of an SM S/M M S m essage allows you to specify
the language you want to create the m essage in, add num bers and
sym bols to the m essage, or write in all lowercase or all uppercase letters. To
change the input m ethod locally, do the following:
1.
2.
3.
4.
5.
6.
Tap the ‘M essaging’m enu.
Tap the ‘W rite m essage’ option in the top left corner of the screen.
Tap the‘M ultim edia m essage’ tab
Tap the ‘O ptions’ tab.
Tap the ‘Input m ethod’ tab on the 3 rd row
Choose the suitable Input m ethod.
View & Edit Common Settings
To view and configure common settings, do the following:
1.Tap the‘Messaging’ menu.
2.Tap the >> (Forward) button.
3.Tap the ‘SMS Settings’ option in the top right corner of the screen.
4.Tap the ‘Multimedia message’tab
5.In the menu that appears, tap the ‘Common settings’ option.
6.Tap the‘Compose’ tap to change the setting. You can have the
following settings
-Slide time
-Creation mode: Warning, Restricted, Free
-Auto Signature: On/Off
-Signature setting
7.Tap the‘Sending’ tap to change the setting. You can have the
following settings:
-Validity Period: 1hr, 6hr, 12hr, 1day, 1week, and maximum.
-Delivery Report: On/Off
-Read Report: On/Off
-Priority: Low, Medium, and High
-Delivery time: Immediate, 1 hr later, 12 hr later, and 24hr later.
-Send and save: On/Off
8.Tap the‘Retrieval’ tap to change the setting. You can have the
following settings:
-Home network: Immediate, Deferred, and Rejective.
17
Smartwatch Features
-Roaming: As home, Immediate, Deferred, and Rejective. Filters:
Anonymous On/Off, Advertisement On/Off
-Read report: On request, send, and never send.
-Delivery report: On/Off
9.Preferred storage: Phone/ Memory card
10.Memory status: Phone/ Memory card
Turn on or turn off each of the following settings by tapping them and
then tapping the On/Off button at the bottom of the screen:
- Delivery path report
-Reply path
-Save sent messages
-Save sent messages
View Memory Status
To view how m uch m em ory you have used on the phone and on your
SIM card, do the following:
1.
2.
3.
4.
5.
6.
7.
8.
9.
Tap the‘M essaging’m enu.
Tap the>> (Forward) button.
Tap the ‘SM S Settings’ option in the top right corner of the screen.
Tap the ‘M ultim edia m essage’ tab
In the m enu that appears, tap the ‘Com m on settings’ option.
In the m enu that appears, tap the ‘M em ory status’ option on the 5 th row.
Tap the ‘Phone’ the screen will refresh and display the percent of your
phone m em ory that is currently being used.
Tap the ‘M em ory card’ the screen will refresh and display the percent of
your m em ory card that is currently being used.
Click the Back button to exit the screen.
Select a Preferred Storage Location
To designate a preference of where to store your SMS data, do
the following:
1.
2.
3.
4.
5.
6.
7.
6.
Tap the SM S m enu.
Tap the>> (Forward) button.
Tap the SM S Settings option in the top right corner of the screen.
Tap the ‘M ultim edia m essage’ tab
In the m enu that appears, tap the ‘Com m on settings’ option.
In the m enu that appears, tap the ‘Preferred storage’ option.
Tap either the SIM or the Phone radio button to designate where
SM S data should be stored.
Click the O K button to save your choice.
18
SIMWATCH SSW01 -Smartwatch Manual
Manage Call History
All of the features listed in this section are available through the Call history
m enu on the Sm artwatch. To access the Call history m enu, do the
following:
1.
Tap the default (analog) watch display.
2.
3.
O n the digital watch display that appears, tap the
(M enu) button.
Tap the >> (Forward) button in the lower left corner of the screen 5
tim es
The Call history m enu appears in the bottom right corner of the screen.
View Missed Calls
To view a list of your m issed calls, do the following:
1.
2.
Tap the ‘Call history’ m enu.
Tap the ‘M issed calls’ option on the 1 st row.
View Dialled Calls
To view a list of your dialled calls, do the following:
1.
2.
Tap the ‘Call history’ m enu
Tap the ‘Dialled calls’ option on the 2nd row to view dialled calls
View Received Calls
1. Tap the ‘Call history’ m enu
2. Tap the ‘Received calls’ option on the 3 rd row to view Received Calls
Delete Call Logs
To delete your call logs, do the following:
1.
2.
3.
Tap the ‘Call history’ m enu.
Tap the ‘Delete call logs’ option on the 4 rd row.
Tap the call log you want to delete— Dialled, M issed, or Received— or tap
‘Allcalls’ to erase all logs.
19
Smartwatch Features
View Call Timers
To view tim ers for the calls that have been m ade and received on your
Sm artwatch, do the following:
1.
2.
3.
Tap the Call history m enu.
Tap the‘Call tim ers’ on the 5 th row
A popup screen that displays the related tim es:
l
Last call
l
Dialled calls
l
Received calls
TIP: Tap the ‘Reset all’ under the page after pressing ‘O ptions’ bottom
on the bottom left corner to set all of the tim ers to zero.
Call Costs
This function needs Service Provider support in order to work correctly. Your
Service Provider can also provide you with the PIN2 password you need, to
com plete these steps. To view the costs for the calls that have been m ade
and received on your Sm artwatch, do the following:
1.
2.
3.
5.
6.
7.
8.
Tap the ‘Call history’ m enu.
Tap the ‘Call cost’ option on the 6 th row.
Tap any of the following options to view a popup screen that displays
the related tim es:
l
Last call cost
l
Total cost
(O ptional) Tap the Reset cost option and enter your PIN2 password to
reset the costs listed on the screen.
(O ptional) Tap the M ax cost option and enter your PIN2 password to set
a m axim um am ount you are willing to pay for calls on the phone.
(O ptional) Tap the Price per unit option and enter your PIN2 password to
view the price per unit you are paying for each call.
Tap Back to save your changes.
Text Message Counters
To view the total num ber of text m essages you have sent and received, do
the following:
1.
2.
3.
4.
5.
6.
7.
Tap the Call history m enu.
Tap the>> (Forward) button.
Tap the Text m sg option in the bottom left corner of the screen.
Tap the Sent option to view a popup screen that lists the total num ber of
m essages that have been sent from the phone.
Tap the Received option to view a popup screen that lists the total
num ber of m essage that have been received by the phone.
(O ptional) Tap the Reset button at the bottom of the screen to reset the
counter for whichever option – Sent or Received – is currently selected.
Tap the Back button to exit the screen.
20
SIMWATCH SSW01 -Smartwatch Manual
GPRS Counters
To view the total num ber of G PRS data you have sent and received, do the
following:
1.
2.
3.
4.
5.
6.
7.
8.
Tap the ‘Call history’ m enu.
Tap the ‘G PRS counter’ option on the last row by swipe upward.
Tap the ‘Last sent’ option to view a popup screen that lists the volum e of
data that was sent from the phone in the last m essage.
Tap the ‘Last received’ option to view a popup screen that lists the
volum e of data that was received by the phone in the last m essage.
Tap the ‘All sent’ option to view a popup screen that lists the total
volum e of data that has been sent from the phone.
Tap the ‘All received’ option to view a popup screen that lists the total
volum e of data that has been received by the phone.
(O ptional) Tap the ‘Reset counter’ button at the bottom of the screen to
reset all of the G PRS counters.
Tap the ‘Back’ button to exit the screen.
Manage Silent Setting
To activate or deactivate the silent m ode setting for your Sm artwatch, do
the following:
1.
Tap the default (analog) watch display.
2.
3.
O n the digital watch display that appears, tap the
(M enu) button.
Tap the >>(Forward) button in the bottom left corner of the screen4
tim es.
Tap the Silent m enu that appears.
If the phone was in general m ode, a Silent m ode activated notification
will appear.
4.
5.
If the phone was in silent m ode, a G eneral m ode activated notification
will appear.
21
Smartwatch Features
Manage Bluetooth
All of the features listed in this section are available through the Bluetooth
m enu on the Sm artwatch. To access the Bluetooth m enu, do the following:
1.
Tap the default (analog) watch display.
2.
3.
O n the digital watch display that appears, tap the
(M enu) button.
Tap the >> (Forward) button in the bottom left corner of the screen2
tim es.
Tap the Bluetooth m enu that appears.
Turn On/Off Power
To activate/deactivate the Bluetooth feature, do the following
1.
2.
3.
Tap the Bluetooth m enu.
Tap the ‘Power’ button once on the top row of the screen to switch on
Bluetooth. An [on] indication tap will appear on the right side of the row.
Tap the ‘Power’ button again on the top row of the screen to switch off
Bluetooth. An [off] indication tap will appear on the right side of the row.
Turn On/Off Smartwatch Visibility to Bluetooth Devices
To m ake the Sm artwatch visible to Bluetooth devices, do the following
1.
2.
3.
Tap the Bluetooth m enu.
Tap the ‘Visibility’ button once on the 2nd row of the screen to be visible.
An [on] indication tap will appear on the right side of the row.
Tap the ‘Visibility’ button again on the 2nd row of the screen to be
invisible. An [off] indication tap will appear on the right side of the row.
View my device
To search for a Bluetooth device in the vicinity of the Sm artwatch, do the
following
1.
2.
Tap the Bluetooth m enu.
Tap the ‘M y device’ button on the 3 rd row of the screen.
Note: If your Bluetooth device has not yet been paired with the
Sm artwatch, tap the Search new device option to locate it.
22
SIMWATCH SSW01 -Smartwatch Manual
Search
To search for a Bluetooth device in the vicinity of the Sm artwatch, do the
following
1.
2.
3.
Tap the Bluetooth m enu.
Tap the ‘M y device’ button on the 4 th row of the screen.
Tap the ‘Search audio device’ button to search for Bluetooth device
nearby.
Assign a Name to Your Bluetooth Device
To associate a nam e with the Bluetooth device, do the following
1.
2.
3.
4.
5.
6.
Tap the Bluetooth m enu.
Tap the ‘M y nam e’ buttom on the 5 th row of the screen
Enter the nam e you want to use to identify the Bluetooth.
Tap the downward arrows bottom on the bottom left corner on the
keyboard when finish.
Tap the ‘O ptions’ button.
Tap the Done option in the m enu that appears.
Advanced
The Sm artwatch also provides 3 advanced Bluetooth features, all of which
can be accessed by doing the following:
1.
2.
Tap the ‘Bluetooth’ m enu.
Tap the ‘Advanced’ option on the 6 th row of the screen.
Advanced O ption 1: Audio path
The ‘Audio path’ option allows you to designate where you want audio path
inform ation stored. The two options are:
• Leave in phone
• Forward to Bluetooth headset
Advanced O ption 2: Storage
The ‘Storage’ option allows you to designate where you want Bluetooth data
to be stored. The three options are:
• Phone
• M em ory card
• Always ask
Advanced O ption 3: M y address
The M y address option displays the Sm artwatch's network address, which is
used by your Bluetooth device when pairing up.
23
Smartwatch Features
Set up Two-Way Communication
All of the features listed in this section are available through the Bluetooth
m enu on the Sm artwatch. To access the Bluetooth m enu, do the following:
1.
Tap the default (analog) watch display.
2.
3.
O n the digital watch display that appears, tap the
(M enu) button.
Tap the >> (Forward) button in the bottom left corner of the screen 3
tim es.
Tap the Bluetooth m enu that appears.
Turn On/Off Power
To activate/deactivatethe Bluetooth Com panion powerfeature, do the
following
1.
2.
3.
Tap the ‘Two W ay Com .’ m enu.
Tap the ‘Bluetooth Com panion Power’ button once on the 1st row of the
screen to switch on the Bluetooth Com panion Power’. An [on] indication
tap will appear on the right side of the row.
Tap ‘Bluetooth Com panion Power’ button again on the 1st row of the
screen to switch off the Bluetooth Com panion Power’. An [off] indication
tap will appear on the right side of the row.
Turn On/Off Smartwatch Visibility to Smartphone
To m ake the Sm artwatch visible to Bluetooth devices, do the following
1.
2.
3.
Tap the ‘Two W ay Com .’ m enu.
Tap the ‘Visibility’ button once on the 2nd row of the screen to be visible.
An [on] indication tap will appear on the right side of the row.
Tap the ‘Visibility’ button again on the 2nd row of the screen to be
invisible. An [off] indication tap will appear on the right side of the row.
Set up Two-Way Communication with your smartphone
To connect the sm artwatch to your sm artphone through two -way
com m unication do the following
1.
2.
3.
Switch ‘Bluetooth Com panion Power’ on
Switch ‘visibility’ on
G o back to the ‘Bluetooth’ m enu. (O n the digital watch display that
appears, tap the
(M enu) button.Tap the >> (Forward) button in the
bottom left corner of the screen 2 tim es.)
24
SIMWATCH SSW01 -Smartwatch Manual
4.
5.
6.
Tap the ‘Search audio device’ button on the 4 th row of the screen.
Select ‘Burg2way’ and wait for choose ‘pair’ bottom appears on the
bottom left corner. Tap the ‘Pair’ bottom
Type in your chosen passcode which m atches with the passcode
You are now successfully connected.
Receive a call through Two-Way Communication
W hen you receive a call it will appear on both your sm artphone and your
Sm artwatch.
You can answer the call with either your Sm artwatch or your sm artphone.
During the call you can change settings such as volum e.
Make a call through Two-Way Communication
To m ake a call through Two-W ay Com m unication do the following.
1.
2.
3.
4.
G o to ‘phone’
Insert a num ber and select ‘call’
You will get two options:
- SIM call
- Bluetooth call
Select ‘Bluetooth call’, now you will m ake a call through the Sm artwatch
using the SIM card in your m obile phone.
Send and receive messages through Two-Way Communication
To send and receive m essages through Two-W ay Com m unication you need
to install the APK application on your sm artphone.
1.
2.
3.
4.
5.
6.
7.
Extract the .rar file to your com puter
Connect your sm artphone to the com puter through USB
Copy the extracted .apk file to your sm artphone
Deconnect the sm artphone and com puter
Install the APK application on your sm artphone
The application is called Reacher and will run on the background
You can now send and receive m essages on your watch.
25
Smartwatch Features
Manage Multimedia
Your Sm artwatch com es with a built-in cam era, video recorder, audio
player, video player, sound recorder, and im age viewer, all of which are
available through the M ultim edia m enu on the Sm artwatch. To access the
M ultim edia m enu, do the following:
1.
Tap the default (analogue) watch display.
2.
O n the digital watch display that appears, tap the
(M enu) button.
The M ultim edia m enu appears.
Camera
Cam era O ptions
The Sm artwatch cam era contains a wide range of settings you can use to
create high-quality photographs. To access these settings, open the
cam era and tap the
(O ptions) icon in the bottom left corner of the view
finder. The following table explains each of the settings and the options
available under each one.
Settings
Options Available
Shutter sound: Off, Sound 1, Sound 2, Sound 3
EV: Options of -2.0, -1.5. -1.0, -.05, 0, .05, 1.0, 1.5, 2.0
Cam era
settings
Contrast: High, Medium, Low
Anti-flicker: 50hz or 60hz
Delay timer: Off, 5 sec, 10 sec
Cont. shot: Off, Continuous shot
Image
settings
Image size: 240x320, 80x60, 160x120, 320x240, 640x480
White balance
Auto, Daylight, Tungsten, Fluorescent, Cloudy, Incandescent
Scene mode
Auto or Night
Effect settings
Norm al, Grayscale, Sepia, Sepia green, Sepia blue, Color invert
Image quality: Low, Norm al, Good
26
SIMWATCH SSW01 -Smartwatch Manual
Take Photos
To take photos with your Sm artwatch, do the following:
1.
2.
3.
Tap the ‘M ultim edia’ m enu.
Tap the ‘Cam era option’ in the top left corner of the screen.
W ith the cam era view finder displayed, point the cam era at the item you
want to photograph and press the
(Cam era) icon in the bottom
center of the screen.
The cam era will take the photo and store it autom atically on your phone
or on your m em ory card, depending on your cam era settings.
4.
To view your photos, refer to the View Photos section below.
View Photos
To view photos you have taken, do the following:
1.
2.
3.
4.
Tap the M ultim edia m enu.
Tap the ‘Cam era’ option in the top left corner of the screen.
Tap the
(O ptions) icon in the bottom left corner of the screen.
Tap the Photos option in the m enu and all of your photos will appear in
a list.
Note: If you do not see your photos listed on the screen, they m ight be
stored on at an alternate storage location on your phone. Refer to the
Switch Storage Source instructions below for inform ation on how to access
files stored on your phone or on a m em ory card.
Switch Storage Source
You can only switch storage locations if you have a m em ory card (M icro SD
card) inserted in your phone. To change the location where your photos
are stored on the phone, do the following:
1.
2.
Tap the M ultim edia m enu.
Tap the Cam era option in the top left corner of the screen.
3.
4.
5.
6.
Tap the
(O ptions) icon in the bottom left corner of the screen.
Tap the ‘Advanced setting’ option on the rightend of the m enu.
Tap the ‘Storage’ option.
Tap either Phone or M em ory card, depending on where you want your
photos stored.
Note: If you do not have a m em ory card (M icro SD) card inserted in your
phone, the only option you will see in the list is Phone.
6.
Tap ‘O K’ on the bottom left corner to save your changes.
Restore Default Settings
To restore the default cam era settings, do the following:
1.
2.
Tap the M ultim edia m enu.
Tap the Cam era option in the top left corner of the screen.
3.
Tap the
(O ptions) icon in the bottom left corner of the screen.
27
Smartwatch Features
4.
5.
6.
Tap the ‘Advanced setting’ option on the right end of the m enu.
Tap the ‘Restore default’ option on the right end of the m enu that
appears.
Tap ‘Yes’ to confirm that you want to restore the default settings.
Video Recorder
Video Recorder O ptions
The Sm artwatch video recorder contains a wide range of settings you can
use to record videos. To access these settings, open the video recorder and
tap the
(O ptions) icon in the bottom left corner of the view finder. The
following table explains each of the settings and the options available
under each one.
Settings
Options Available
EV: Options of -2.0, -1.5. -1.0, -.05, 0, .05, 1.0, 1.5, 2.0
Cam corder
settings
Night m ode: On or Off
Anti-flicker: 50hz or 60hz
Video settings
Video quality: Low, Norm al, Good
White balance
Auto, Daylight, Tungsten, Fluorescent, Cloudy, Incandescent
Effect settings
Norm al, Grayscale, Sepia, Sepia green, Sepia blue, Color
invert
View Videos
Videos are not viewed through the Video recorder option on the
Sm artwatch; they are viewed through the Video player option. Refer to the
Video Player section below for m ore details on how to watch the videos you
have taken.
Take Videos
To take videos with your Sm artwatch, do the following:
To view photos you have taken, do the following:
1.
2.
3.
4.
5.
6.
Tap the M ultim edia m enu.
Tap the ‘Cam era’ option in the top left corner of the screen.
Tap the
(O ptions) icon in the bottom left corner of the screen.
Tap the ‘Switch to’ option in the m enu.
Tap the ‘Video recorder’ option to activate the video recorder.
W ith the cam corder view finder displayed, point the lens at the item you
want to record and press the
(Video) icon in the bottom centre of
the screen.
The cam era will start to record video.
28
SIMWATCH SSW01 -Smartwatch Manual
7.
To pause the recording, tap the
the screen.
8.
To stop recording, tap the
the screen.
9.
Tap ‘Yes’ to save the video you just recorded or No to erase it.
10.
(Pause) icon in the bottom center of
(Stop) icon in the bottom right corner of
To view your videos, refer to the Video Player section below.
Switch Storage Source
You can only switch storage locations if you have a mem ory card (M icro SD
card) inserted in your phone. To change the location where your photos
are stored on the phone, do the following:
1.
2.
Tap the M ultim edia m enu.
Tap the Cam era option in the top left corner of the screen.
3.
4.
5.
6.
Tap the
(O ptions) icon in the bottom left corner of the screen.
Tap the ‘Advanced setting’ option on the right end of the m enu.
Tap the ‘Storage’ option.
Tap either Phone or M em ory card, depending on where you want your
photos stored.
Note: If you do not have a m em ory card (M icro SD) card inserted in your
phone, the only option you will see in the list is Phone.
7.
Tap ‘O K’ on the bottom left corner to save your changes.
Restore Default Settings
To restore the default cam era settings, do the following:
1.
2.
Tap the M ultim edia m enu.
Tap the Cam era option in the top left corner of the screen.
3.
4.
5.
Tap the
(O ptions) icon in the bottom left corner of the screen.
Tap the ‘Advanced setting’ option on the right end of the m enu.
Tap the ‘Restore default’ option on the right end of the m enu that
appears.
Tap ‘Yes’ to confirm that you want to restore the default settings.
6.
Audio Player
The Sm artwatch audio player allows you to play M P3s and M P4s that are
stored directly on yourSm artwatch or on a M icroSD (m em ory) card that you
have inserted into the Sm artwatch.
Create and Configure the Audio Player List
The first tim e you access the audio player, the play list will be em pty. To add
files to the list, do the following:
1.
Tap the ‘M ultim edia’ m enu.
29
Smartwatch Features
2.
3.
4.
Tap the ‘Audio player’ option in the bottom left corner of the screen.
Tap the List button.
Tap the O ptions button.
Note: Steps 5 through 13 below only need to be done the first tim e you
create a list or whenever you want to recreate a brand new list from scratch.
If you sim ply want to add a file to the existing list, jum p to Step 14.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Tap the Settings button.
Tap the Player settings button.
In the Pre. playlist field, select the location where the audio files are
stored: Phone or M em ory card.
IM PORTANT: M ake sure the List auto gen. field on the sam e screen is set
to O ff, otherwise you will not be able to access your files.
(O ptional) Designate whether you want the files in this list to repea t: O ff
or O n.
(O ptional) Designate whether you want the files in this list to play in
shuffle m ode: O ff or O n.
Tap ‘O K’ when you are done.
Tap ‘Back’.
Tap ‘O ptions’.
Tap ‘Add’.
In the list of audio files that appears, tap the nam es of each file you
want to add to the audio player list.
As soon as each file is done added to the list, a popup screen will
appear with the word Done on it.
16.
17.
W hen you have finished adding files, tap ‘Back’.
Tap ‘Back’ again.
The screen will then display the list of all available au dio files you can
play.
Play an Audio File
To play an audio file, do the following:
1.
2.
3.
4.
5.
Tap the M ultim edia m enu.
Tap the Audio player option in the bottom left corner of the screen.
Tap the List button.
Tap the nam e of the audio file that you want to listen to.
In the list that appears, tap ‘Play’.
The file will begin to play. W hen the song is finished, the Audio Player will
autom atically play the next file in the list or a random file if shuffle m ode
is turned on.
Play All Audio Files
To play all audio files in a list, do the following:
1.
2.
3.
4.
Tap
Tap
Tap
Tap
the
the
the
the
M ultim edia m enu.
Audio player option in the bottom left corner of the screen.
List button.
nam e of the first audio file in the list.
30
SIMWATCH SSW01 -Smartwatch Manual
5.
In the list that appears, tap ‘Play’.
The file will begin to play autom atically, followed by all of the other
songs in the list.
View Details of an Audio File
To view the details of an audio file, do the following:
1.
2.
3.
4.
5.
6.
Tap the M ultim edia m enu.
Tap the Audio player option in the bottom left corner of the screen.
Tap the List button.
Tap the nam e of the audio file whose details you to view.
In the list that appears, tap ‘Details’.
The screen that appears lists the following inform ation about the file:
l
Size
l
Tim e (length of the song)
l
Title
l
Artist
Video Player
The Sm artwatch video player displays a list of all videos stored on your
phone or on a M icroSD m em ory card you inserted into the phone. The video
player allows you to play, send, renam e, delete, and sort your videos using
a single m enu.
Play a Video
To play a video, do the following:
1.
2.
3.
4.
5.
Tap the ‘M ultim edia’ m enu.
Tap the ‘Video player’ option in the bottom right corner of the screen.
In the list of videos that appears, tap the one that you want to watch.
Tap the ‘Play’ option.
O n the video screen that opens, tap the ‘Play’ button.
Send a Video
To send a video, do the following:
1.
2.
3.
4.
5.
6.
Tap the ‘M ultim edia’ m enu.
Tap the ‘Video player’ option in the bottom right corner of the screen.
In the list of videos that appears, tap the one that you want to send.
Tap the ‘Send’ option.
In the list that appears, tap one of the following options: As ‘m ultim edia
m essage’ or Via ‘Bluetooth’.
Follow the prom pts to create the m ultim edia or Bluetooth m essage.
Renam e a Video
To renam e a video, do the following:
31
Smartwatch Features
1.
2.
3.
4.
5.
6.
7.
8.
Tap the ‘M ultim edia’ m enu.
Tap the’Video player’ option in the bottom right corner of the screen.
In the list of videos that appears, tap the one that you want to renam e.
Tap the ‘O ptions’ bottom .
Tap the ‘Renam e’ option.
Use the letter pad that appears to type out a new nam e for the video.
W hen you are finished, tap the O ptions button.
Tap ‘Done’ to save the new nam e.
Delete a Single Video
To delete a single video, do the following:
1.
2.
3.
4.
Tap the M ultim edia m enu.
Tap the Video player option in the bottom right corner of the screen.
In the list of videos that appears, tap the one that you want to delete.
Tap ‘Yes’ to confirm that you want to delete the video.
Delete All Videos
To delete all videos in the your, do the following:
1.
2.
3.
4.
5.
Tap
Tap
Tap
Tap
Tap
the ‘M ultim edia’ m enu.
the ‘Video player’ option in the bottom right corner of the screen.
the ‘O ptions’ button in the bottom left corner of the screen.
the ‘Delete’ all files button.
‘Yes’ to confirm that you want to delete all of the videos in the list.
Sort Your Video List
To sort the videos in your list, do the following:
1.
2.
3.
4.
5.
6.
7.
Tap the ‘M ultim edia’ m enu.
Tap the ‘Video player’ option in the bottom right corner of the screen.
Tap the ‘O ptions’ button in the bottom left corner of the screen.
Tap the ‘Sort by’ button.
Select from one of the following options as your sort criteria:
l
Nam e – Sorts your videos alphabetically.
l
Type – Sorts your videos based on the form at of the video. (The
default form at is .3gp.)
l
Tim e – Sorts by the tim e and date each video was created.
l
Size – Sorts by the file size of each video.
Tap the ‘Select’ button to sort your videos.
Switch Storage Source
You can only switch storage locations if you have a m em ory card (M icro SD
card) inserted in your phone. To change the location where your videos are
stored on the phone, do the following:
1.
2.
3.
4.
Tap
Tap
Tap
Tap
the ‘M ultim edia’ m enu.
the ‘Video player’ option in the bottom right corner of the screen.
the’O ptions’ button in the bottom left corner of the screen.
the ‘Storage’ button on the 6 th row.
32
SIMWATCH SSW01 -Smartwatch Manual
5.
Tap either Phone or M em ory card, depending on where you want your
videos stored.
Note: If you do not have a m em ory card (M icro SD) card inserted in your
phone, the only option you will see in the list is Phone.
6.
Tap ‘O K’ to save your changes.
Sound Recorder
The Sm artwatch sound recorder allows you to m ake audio recordings and
store them on the phone or on your m em ory card.
Create a Sound Recording
To create a sound recording, do the following:
1.
2.
3.
4.
5.
6.
Tap the ‘M ultim edia’ m enu.
Tap the >> (Forward) button in the bottom left corner of the screen.
Tap the ‘Sound recorder’ option in the top left corner of the screen.
Tap the blue Record button near the bottom of the screen.
(O ptional) Tap the Pause button at any tim e to pause the recording.
Tap the Stop button when you are finished recording and the video will
be save autom atically.
Send a Sound Recording
To send a sound recording, do the following:
1.
2.
3.
4.
5.
6.
7.
8.
Tap the ‘M ultim edia’ m enu.
Tap the >> (Forward) button in the bottom left corner of the screen.
Tap the ‘Sound recorder’ option in the top left corner of the screen.
Tap the ‘O ptions’ button.
Tap either the New record option or the List option in order to create or
locate the file you want to send.
W hen you have created/located the file, tap the ‘Send’ option.
In the list that appears, tap one of the following options: As m ultim edia
m essage or Via Bluetooth.
Follow the prom pts to create the m ultim edia or Bluetooth m essage.
View Your List of Sound Recordings
To view your list of sound recordings, do the following:
1.
2.
3.
4.
5.
Tap the M ultim edia m enu.
Tap the >> (Forward) button in the bottom left corner of the screen.
Tap the ‘Sound recorder’ option in the top left corner of the screen.
Tap the ‘O ptions’ button in the bottom left corner of the screen.
In the m enu that appears, tap the ‘List’ option.
33
Smartwatch Features
Delete a Sound Recording
To delete a sound recording, do the following:
1.
2.
3.
4.
5.
6.
7.
8.
Tap the’M ultim edia’ m enu.
Tap the >> (Forward) button in the bottom left corner of the screen.
Tap the ‘Sound’ recorder option in the top left corner of the screen.
Tap the ‘O ptions’ button in the bottom left corner of the screen.
In the m enu that appears, tap the ‘List’ option.
In the list of sound recordings that appears, tap the one that you want
to delete.
In the m enu that appears, tap the ‘Delete’ option.
Tap the ‘Yes button to confirm that you want to delete the recording.
Switch Audio Q uality
To switch the default file form at of your sound recordings, do the following:
1.
2.
3.
4.
5.
6.
7.
Tap
Tap
Tap
Tap
Tap
You
Tap
the M ultim edia m enu.
the >> (Forward) button in the bottom left corner of the screen.
the Sound recorder option in the top left corner of the screen.
the O ptions button in the bottom left corner of the screen.
the ‘Settings’ option.
can choose between ‘Low’ and ‘High’ audio quality.
O K to save your changes.
Switch Storage Source
You can only switch storage locations if you have a m em ory card (M icro SD
card) inserted in your phone. To change the location where your sound
recordings are stored on the phone, do the following:
1.
2.
3.
4.
5.
6.
Tap the ‘M ultim edia’ m enu.
Tap the >> (Forward) button in the bottom left corner of the screen.
Tap the ‘Sound recorder’ option in the top left corner of the screen.
Tap the ‘O ptions’ button in the bottom left corner of the screen.
Tap the ‘Settings’ option.
In the Storage field, select either Phone or M em ory card, depending on
where you want your sound recordings stored .
Note: If you do not have a m em ory card (M icro SD) card inserted in your
phone, the only option you will see in the list is Phone.
7.
Tap ‘O K’ to save your changes.
Image Viewer
The Sm artwatch im age viewer allows you to view and m anage the photos
you take with the Sm artwatch cam era.
View an Im age
To view an im age you have taken with your Sm artwatch cam era, do the
following:
34
SIMWATCH SSW01 -Smartwatch Manual
1.
2.
3.
4.
5.
6.
Tap
Tap
Tap
Tap
Tap
Tap
the ‘M ultim edia’ m enu.
the >> (Forward) button in the bottom left corner of the screen.
the ‘Im age viewer’ option in the top right corner of the screen.
the ‘thum bnail’ of the im age you want to view.
anywhere on the im age, a m enu bar pops up.
the circular arrow icon to rotate the picture 90 degrees.
View Im age Inform ation
To view inform ation for any im age you have taken with your Sm artwatch
cam era, do the following:
1.
2.
3.
4.
5.
6.
Tap the M ultim edia m enu.
Tap the >> (Forward) button in the bottom left corner of the screen.
Tap the ‘Im age viewer’ option in the top right corner of the screen.
Tap the ‘thum bnail’ of the im age whose inform ation you want to view.
Tap ‘O ption’ on the bottom right corner.
Tap ‘Im age inform ation’ option on the 2 th row to view extensive details
about the im age, including its resolution, width, height, and exposure
tim e.
Change Im age Display Style
To change the way im ages are displayed in the Im age Viewer, do the
following:
1.
2.
3.
4.
5.
6.
7.
Tap the ‘M ultim edia’ m enu.
Tap the >> (Forward) button in the bottom left corner of the screen.
Tap the ‘Im age viewer’ option in the top right corner of the screen.
Tap the O ptions button on the bottom right corner.
Tap the ‘Browse style’ option on the 3 rd row.
Select from one of the following options: ‘List style’ or ‘M atrix style’.
Tap ‘O K’ to save your changes.
Send an Im age
To send an im age, do the following:
1.
2.
3.
4.
5.
6.
7.
Tap the ‘M ultim edia’ m enu.
Tap the >> (Forward) button in the bottom left corner of the screen.
Tap the ‘Im age viewer’ option in the top right corner of the screen.
Tap the O ptions button on the bottom right corner.
Tap the ‘Send’ option on the 4th row.
In the list that appears, tap one of the following options: As m ultim edia
m essage or Via Bluetooth.
Follow the prom pts to create the m ultim edia or Bluetooth m essage.
Use Im age
To use one of your im ages as a default im age within the Sm artwatch, do the
following:
1.
2.
3.
Tap the M ultim edia m enu.
Tap the >> (Forward) button in the bottom left corner of the screen.
Tap the ‘Im age viewer’ option in the top right corner of the screen.
35
Smartwatch Features
4.
5.
6.
7.
Tap the im age you want to use.
Tap the O ptions button on the bottom right corner.
Tap the ‘Use as’ option on the 5 th row.
Select from the following list of uses for the im age:
l
W allpaper
l
Screen saver
l
Power on display
l
Power off display
7.
Tap ‘O K’ to save your selection.
Renam e an Im age
To renam e an im age, do the following:
1.
2.
3.
4.
5.
6.
7.
8.
9.
Tap the ‘M ultim edia’ m enu.
Tap the >> (Forward) button in the bottom left corner of the screen.
Tap the ‘Im age viewer’ option in the top right corner of the screen.
In the list of im ages that appears, tap the one that you want to renam e.
Tap the O ptions button on the bottom right corner.
Tap the ‘Use as’ option on the 6 th row.
Use the letter pad that appears to type out a new nam e for the im age.
W hen you are finished, tap the ‘O ptions’ button.
Tap ‘Done’ to save the new nam e.
Delete an Im age
To delete a single im age, do the following:
1.
2.
3.
4.
5.
6.
7.
Tap the M ultim edia m enu.
Tap the >> (Forward) button in the bottom left corner of the screen.
Tap the Im age viewer option in the top right corner of the screen.
In the list of im ages that appears, tap the nam e of the im age you want
to delete.
Tap the O ptions button on the bottom right corner.
Tap the ‘Use as’ option on the 7 th row.
Tap ‘Yes’ to confirm that you want to delete the im age.
Sort Im ages
To sort the im ages in your list, do the following:
1.
2.
3.
4.
5.
6.
Tap the M ultim edia m enu.
Tap the >> (Forward) button in the bottom left corner of the screen.
Tap the ‘Im age viewer’ option in the top right corner of the screen.
Tap the O ptions button in the bottom left corner of the screen.
In the m enu that appears, tap the Sort by option on the 8 th row.
Select from any of the following options as your sort criteria:
l
Nam e – Sorts your im ages alphabetically.
l
Type – Sorts your im ages based on the form at.
l
Tim e – Sorts by the tim e and date each im age was taken.
36
SIMWATCH SSW01 -Smartwatch Manual
l
7.
Size – Sorts by the file size of each im age.
Tap the ‘Select’ button to sort the im age list.
Switch Storage Source
You can only switch storage locations if you have a m em ory card (M icro SD
card) inserted in your phone. To change the location where your sound
recordings are stored on the phone, do the following:
1.
2.
3.
4.
5.
6.
Tap the ‘M ultim edia’ m enu.
Tap the >> (Forward) button in the bottom left corner of the screen.
Tap the ‘Im age viewer’ option in the top right corner of the screen.
Tap the ‘O ptions’ button in the bottom left corner of the screen.
Tap the Storage option on the 9 th row.
Select either ‘Phone’ or ‘M em ory card’, depending on where you want
your sound recordings stored.
Note: If you do not have a m em ory card (M icro SD) card inserted in your
phone, the only option you will see in the list is Phone.
Extra Features
All of the features listed in this section are available through the Extra m enu
on the Sm artwatch. To access the Extra m enu, do the following:
1.
Tap the default (analog) watch display.
2.
3.
O n the digital watch display that appears, tap the
(M enu) button.
Tap the >> (Forward) button in the bottom left corner of the screen6
tim es.
Calendar
To access the calendar on your Sm artwatch, do the following:
1.
2.
Tap the Extra m enu.
Tap the Calendar option in the bottom left corner of the screen.
The O ptions button in the bottom left corner of the screen provides
access to the following actions:
l
View — View any events for the date that is selected on the
calendar
37
Smartwatch Features
l
l
l
l
l
l
l
View all — View all events for the m onth that is currently
displayed
Add event — Create an event rem inder in the calendar
Delete event — Delete all event rem inders, overdue event
rem inders, or date-specific event rem inders
Jum p to date — G o to a specific date without having to scroll
backward or forward through the calendar
G o to today — Jum p back to the current date if you were
previously viewing a different date
G o to weekly view — View each calendar week instead of m onth
Start of a week – To change from starting a week on ‘Sunday’ or
‘M onday’
All of the fea tures lis ted i n t his sec tion a re a vai lab le th rou gh the Ext ra
men u 1 on the S ma rt wa tch . To a cce ss the Ext ra m enu, d o the
follo win g:
1.
Ta p t he d efa ult (a na log ) wa tc h d is p lay.
2.
O n t he d igi ta l w a tch d isp la y t ha t a p p ea rs , ta p th e
b utt on.
(M enu)
Calculator
To access the calculator on your Sm artwatch, do the following:
1.
2.
3.
Tap the Extra m enu 1.
Tap the ‘O rganizer’ on the top left corner.
Tap the ‘Calculator’ option in the top right corner of the screen.
Files
To access the files on your Sm artwatch, do the following:
1.
2.
3.
4.
5.
Tap
Tap
Tap
You
You
the Extra m enu 1.
the ‘O rganizer’ on the top left corner.
the ‘Files m anager’ option in the top left corner of the screen.
can choose between m anaging the file on ‘Phone’ or ‘M em ory card’
can choose the options of ‘O pen’, ‘Form at’, and ‘Details’
Alarm
To set or edit the alarm on your Sm artwatch, do the following:
1.
2.
3.
4.
1.
2.
Tap
Tap
Tap
Tap
Tap
Tap
the Extra m enu 1.
the ‘Organizer’ on the top left corner.
the ‘Alarm ’ option in the bottom right corner of the screen.
one of the available alarm slot.
the #1 field to switch the alarm to O n.
the #2 field to set or change the alarm tim e.
38
SIMWATCH SSW01 -Smartwatch Manual
3.
4.
5.
6.
7.
8.
Tap the #3 field to designate how often the alarm should go
off: O nce, Every day, or Custom .
If you selected Custom in Step 10, designate the days of the week you
would like the alarm to go off.
Tap the #4 field to designate the alert type you want to use: Vibrate and
ring, Ring only, or Vibrate only.
Tap ‘Done’ to save the alarm settings.
Tap ‘Yes’ to confirm that you want to save the settings.
Tasks
To m anage tasks on your Sm artwatch, do the following:
1.
2.
3.
Tap the Extra m enu 1
Tap the ‘O rganizer’ on the top left corner.
Tap the Tasks option on the bottom left corner.
The ‘Add’ button in the bottom left corner of the screen provides access
to the following actions:
l
l
l
l
l
l
l
l
l
l
l
View — View any tasks that have been entered into the Sm artwatch
Add — Create a task
Edit — Edit an existing task
Search — Search for an existing task by tim e or by subject
Delete — Delete an existing task
Delete overdue — Delete an overdue task
Delete all — Delete all tasks
Jum p to date — G o to a specific date to create or view tasks on
that date
View uncom pleted — View all tasks that have not yet been
com pleted
Send vCalendar — Send the task to your Bluetooth device
Save as file — Save an existing task as a file
Profiles
List of Profiles
1.
2.
3.
Tap the Extra m enu 1
Tap the ‘O rganizer’ on the top left corner.
Tap the ‘Profile’ option on the top right corner.
The Sm artwatch com es with 6 pre-set profiles:
• G eneral
39
Smartwatch Features
•
•
•
•
Silent
M eeting
O utdoor
M y style
Customize
Each of the pre-set profiles can be configured to suit your needs by doing
the following:
1.
2.
3.
G o to Extra m enu 1
Tap the Profiles m enu in the top right corner of the screen.
Tap the profile you want to configure.
Note: If you want to configure the Headset or Bluetooth profile, tap the >>
(Forward) button again to access these options.
6.
Tap the ‘O ption’ button on the lower right corner.
7.
Tap the Custom ize option.
8.
Tap ‘Tone settings’ to designate the tones you want to hear for incom ing
calls, alarm s, power on and power off actions, m essage arrivals, and
keypad pressing.
Tap Volum e to designate the volum e of the ringtone and of the keys
when the keypad is tapped.
Tap ‘Alert type’to designate whether you want to be alerted to new calls
or m essages by ringing only, vibrating only, vibrating and then ringing,
or vibrating while ringing.
Tap ‘Ring type’ to designate whether you want a single ring, repeated
ringing, or ascending ringing (growing louder).
(O ptional) Tap Extra tone if you want to designate additional instances
where tones will be played, such as when the Sm artwatch sends a
warning or error, when cam p on<?> is enabled, or when connecting.
Tap Answer m ode to designate the action you will take to answer a call.
W hen you have finished, tap ‘Back’.
If you want the profile you just custom ized to be the active one, tap the
Activate option.
9.
10.
11.
12.
13.
14.
15.
Phone Settings
All of the features listed in this section are available through the Settings
m enu on the Sm artwatch. To access the Settings m enu, do the following:
1.
Tap the default (analog) watch display.
2.
O n the digital watch display that appears, tap the
40
(M enu) button.
SIMWATCH SSW01 -Smartwatch Manual
3.
Tap the >> (Forward) button in the bottom left corner of the screen5
tim es.
The ‘Settings’ m enu appears in the bottom left corner of the screen.
Pen Calibration
For details on how to calibrate the touchscreen, refer to Calibrate the
Touchscreen in Chapter 2, "First Tim e Use."
Phone Settings
Tim e and Date
To set the tim e and date from the Settings m enu, do the following:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Tap the Settings m enu.
Tap the Phone settings option in the top right corner of the screen.
Tap the Tim e and date option.
Tap the Set tim e/date option.
Tap the HH:M M field then use the keypad at the bottom of the screen to
enter the current hour and m inute using the 24 hour clock (for exam ple,
4:00 p.m . should be entered as 16:00).
Tap the YYYY/M M /DD field, then use the keypad at the bottom of the
screen to enter the current year, m onth, and day in the form at
YYYYM M DD.
Tap the Daylight saving field, then select‘O n’ or ‘O ff’ for Daylight savings.
Tap ‘O K’ to save your changes.
Tap the Set form at option.
In the Tim e field, select either 12 to display the hour as a num bers from 1
through 12 or select 24 to display the hour as a num ber from 1 through
24.
In the Date field, select the date form at you want to use: M M DD YYYY,
DD M M YYYY, or YYYY M M DD.
In the Date separator field, select the separator you want to use
between the m onth, date, and year. You can chose from the following:
slash (11/25/2012), hyphen (11-25-2012), period (11.25.2012), or colon
(11:25:2012).
Tap ‘O K’ to save your changes.
Tap the Update with tim e zone option to select O n or O ff. If set to O n,
the phone will autom atically update the tim e when you enter a new tim e
zone; if set to O ff, the phone will not autom atically update the tim e.
Tap ‘Back’ to exit the Tim e and date options.
41
Smartwatch Features
Schedule Power O n/O ff
To schedule a tim e when you want the Sm artwatch to turn on or off
autom atically, do the following:
1.
2.
3.
4.
5.
6.
7.
Tap the Settings m enu.
Tap the Phone settings option in the top right corner of the screen.
Tap the Schedule power on/off option to see all events: a red icon
indicates a Power off event; a green icon indicates a Power on event.
Tap the first entry in the list.
In the #1 Status field, select Disable to deactivate a scheduled power
on/off event or Enable to activate one.
In the #2 field, select the type of event you want to create: Power on or
Power off.
In the #3 field, set the tim e you want to have the event occur.
Set the Default Language for the Sm artwatch
To set the default language for all screens, m enus, and options in the
Sm artwatch, do the following:
1.
2.
3.
4.
Tap the Settings m enu.
Tap the Phone settings option in the top right corner of the screen.
Tap the Language option to view the list of languages supported by the
Sm artwatch.
Select the new default language you want to use andtap ‘OK’.
Set the International Keyboard
1.
2.
3.
4.
5.
Tap the Settings m enu.
Tap the Phone settings option in the top right corner of the screen.
Tap the ‘International Keyboard’ option to view the list of input m ethods
supported by the Sm artwatch.
Tap ‘M ulti language setting’ to choose English, Spanish, French, Italian,
and Dutch.
Tap ‘English Setting’ to choose ‘Auto Space’ and ‘Auto Capatalisation’
Set the Encoding Type
To set the encoding type used when sending data to other devices using
the Sm artwatch, do the following:
1.
2.
3.
4.
5.
Tap
Tap
Tap
Tap
Tap
the ‘Settings’ m enu.
the ‘Phone settings’ option in the top right corner of the screen.
the ‘Encoding’ option.
either ‘ASCII’ or ‘W indows -1252’.
‘O K’ to save your selection.
Configure the Display Screen
To configure what appears on the Sm artwatch display screen, do the
following:
42
SIMWATCH SSW01 -Smartwatch Manual
1.
2.
3.
Tap the ‘Settings’ m enu.
Tap the ‘Phone settings’ option in the top right corner of the screen.
Tap the ‘Display’ option and then tap any or all of the following options
to configure them :
l
W allpaper – Allows you to select an im age to be used as wallpaper
for your Sm artwatch display.
l
Screen auto lock – Allows you to set auto lock tim e: off, 15 secs, 30
secs,1m in, 5 m in
l
Screen saver – Allows you to select an im age that will appear when
the Sm artwatch display is left idle.
l
Power on display – Allows you to select an im age that will appear
briefly when the Sm artwatch is powering up.
l
Power off display – Allows you to select an im age that will appear
briefly when the Sm artwatch is powering down.
l
Show date and tim e – Allows you to designate whether you want to
have the date and tim e displayed on the digital Sm artwatch face.
l
Clock type – Allow you to select between ‘Analogue’ and ‘Digital’.
4. Tap‘Back’ when you are done.
Set Auto Update of Date and Tim e
To turn on or off auto updating of the Sm artwatch date and tim e, do the
following:
1.
2.
3.
4.
5.
Tap the Settings m enu.
Tap the Phone settings option in the top right corner of the screen.
Tap the Auto update of date and tim e option and a sm all blue popup
box will appear displaying the current setting of the option.
Tap ‘O n’ or ‘O ff’ to change the status.
Tap‘Back’ when you are done.
Note: 1. The system will update the “Day and time”automatically, if you insert a SIM card which can access to the internet. Turn O n/O ff Flight M ode
To turn flight m ode on or off for the Sm artwatch, do the following:
1.
2.
3.
4.
Tap the Settings m enu.
Tap the Phone settings option in the top right corner of the screen.
Tap the Flight m ode option to see whether it is currently turned on or off.
Tap one of the following options:
l Norm al m ode This turns flight m ode O FF
l Flight m odeThis turns flight m ode O N and causes the words "Flight
m ode" to appear on the digital display.
l Q uery when power onThis instructs the Sm artwatch to ask you each
tim e you turn it on whether you want the phone to turn on in flight
m ode. If you do not respond to the prom pt, the Sm artwatch will
autom atically go to Norm al m ode after 10 seconds.
43
Smartwatch Features
5.
Tap ‘Back’ to save your changes.
UART Setting
1. Tap the Settings m enu.
2. Tap the Phone settings option in the top right corner of the screen.
3. Tap the ‘UARTsettings’
4. You can choose between URAT1, URAT 2.
M isc Settings: Configure LCD Backlight
To configure the brightness and display tim e of the LCD backlight, do the
following:
1.
2.
3.
4.
5.
6.
7.
Tap the Settings m enu.
Tap the Phone settings option in the top right corner of the screen.
Tap the M isc. settings option.
Tap the LCD backlight option.
Use the stylus to m ove the Brightness slider to the left, to dim the display,
or to the right, to m ake it brighter.
Use the stylus to m ove the Tim e (sec) slider to designate how m any
seconds the LCD backlight should rem ain on.
Tap‘Back’ to save your changes.
Net Settings
Network Selection
To configure the Network Selection option, do the following:
1.
2.
3.
4.
5.
Tap the Settings m enu.
Tap the ‘Net settings’ option in the bottom left corner of the screen.
Tap the ‘SIM ’ option.
Tap the Network selection option once to set it to Autom atic. Tap it
again to set it to Select and then m ake a selection from the list that
appears.
Tap‘Back’ to save your changes.
Preferences
To configure the Preferences option, do the following:
1.
2.
3.
4.
5.
6.
Tap the Settings m enu.
Tap the ‘SIM ’ option.
Tap the Preferences option.
O n the screen that appears, tap the nam e of the network that you want
to set as the preferred network in the system .
Tap‘Back’ to exit the screen.
Tap ‘Back’ again to save your changes.
G PRS Connection
To configure the availability of the G PRS connection, do the following:
1.
Tap the Settings m enu.
44
SIMWATCH SSW01 -Smartwatch Manual
2.
3.
Tap the Net settings option in the bottom left corner of the screen.
Tap the G PRS connection option, you can choose between ‘Data prefer’,
and ‘Call Prefer’
Security Settings
The following Security Settings are used to lock down different aspects of
your Sm artwatch:
• SIM Lock— This PIN num ber can be gotten from your Service Provider
• Phone Lock— To lock/unlock the phone, enter the default password 1122
or create your own password using the Change Password function in the
list.
• Auto Keypad Lock— Use this option to configure the am ount of tim e after
which the keypad will autom atically lock down.
• APN Control— Use this option to configure the num bers in the
APN Control List for your Sm artwatch.
• Change Password— Use this option to change the SIM Lock password or
the phone password for your Sm artwatch.
Call Settings
Caller ID
To configure Caller ID on your Sm artwatch, do the following:
1.
2.
3.
4.
5.
6.
6.
Tap the ‘Settings’ m enu.
Tap the >> (Forward) button.
Tap the Call settings option in the top left corner of the screen.
Tap the ‘SIM call setting’.
Tap the Caller ID option in the m enu.
Tap one of the following options:
l Set by network
l Hide ID
l Send ID
Tap‘Back’ to save your changes.
Call W aiting
To configure Call W aiting on your Sm artwatch, do the following:
1.
2.
3.
4.
5.
6.
Tap the Settings m enu.
Tap the >> (Forward) button.
Tap the Call settings option in the top left corner of the screen.
Tap the Call waiting option in the m enu.
Tap one of the following options:
l Activate
l Deactivate
l Q uery status
Tap‘Back’ to save your changes.
45
Smartwatch Features
Call Divert
The Sm artwatch gives you the option of diverting incom ing calls and
sending them directly to your voicem ail or to a num ber specified by you.
To configure Call Divert on your Sm artwatch, do the following:
1.
2.
3.
4.
5.
Tap the Settings m enu.
Tap the >> (Forward) button.
Tap the Call settings option in the top left corner of the screen.
Tap the Call divert option in the m enu.
Each of the following call divert options can be activated**,
deactivated, or set to "Q uery status" by tapping on it:
l Divert all voice calls
l Divert if unreachable
l Divert if no answer
l Divert if busy
l Divert all data calls
l Cancel all diverts
** W hen you select Activate for any of the divert options, you will be
prom pted to designate whether the num ber should be diverted directly
to your voicem ail account or to a different phone num ber, which you
will then enter on the screen.
6.
7.
In addition to these five divert options, you can ta p the sixth option in
the list, Cancel all diverts, to deactivate all of the divert options at once.
Tap‘Back’to save your changes.
Call Barring
The Call Barring feature differs from the Blacklist feature in that Call Barring
allows you to block calls to and from a specific phone num ber, whereas the
Blacklist only blocks incom ing calls from a specific num ber. In order to
configure call barring, you will need to know your call barring password,
which is usually set to 0000 by default. Aside from the instructions below,
you will need to contact your Service Provider to m ake sure the feature is
properly supported.
To configure Call Barring on your Sm artwatch, do the following:
1.
2.
3.
4.
5.
6.
Tap the Settings m enu.
Tap the >> (Forward) button.
Tap the Call settings option in the top left corner of the screen.
Tap the Call barring option in the m enu.
To set up barring for outgoing calls, tap the ‘O utgoing calls’ option.
Each of the following outgoing call options can be activated,
deactivated, or set to "Q uery status" by tapping on it::
l All calls – This will block users from m aking any calls on the
Sm artwatch.
l International calls – This will block users from m aking any
international calls on the Sm artwatch.
l International calls except to hom e PLM N – This will block users from
m aking any international calls on the Sm artwatch except for calls
m ade to their local public land m obile network (PLM N).
46
SIMWATCH SSW01 -Smartwatch Manual
7.
8.
9.
10.
11.
12.
13.
Tap the Back button to save your changes.
To set up barring for incom ing calls, tap the ‘Incom ing calls’ option.
Each of the following incom ing call options can be activated,
deactivated, or set to "Q uery status" by tapping on it:
l All calls – This will block all calls m ade to your Sm artwatch.
l W hen roam ing – This will block all calls m ade to your Sm artwatch
when your phone is outside its service area and is in Roam ing m ode.
Tap the Back button to save your changes.
To cancel all barring settings on your Sm artwatch, tap the Cancel all
option.
To change your call barring password, tap the Change barring
password option.
Tap‘Back’ to save your changes.
Line Switching
To configure line switching on your Sm artwatch, do the following:
1.
2.
3.
4.
Tap
Tap
Tap
Tap
the
the
the
the
Settings m enu.
>> (Forward) button.
Call settings option in the top left corner of the screen.
Line switching option in the m enu.
The Sm artwatch will autom atically switch to the other line.
5.
6.
(O ptional) Tap the Line switching option again to switch back to the
original.
Tap‘Back’ to save your changes.
Advanced Settings
To configure advanced settings on your Sm artwatch, do the following:
1.
2.
3.
4.
5.
Tap
Tap
Tap
Tap
The
l
l
l
the Settings m enu.
the >> (Forward) button.
the Call settings option in the top left corner of the screen.
the Advance settings option in the m enu.
m enu that appears provides access to the following features:
Blacklist – Turn the blacklist on or off and add telephone num bers to
it.
Note: To view the num bers that have already been added to your
blacklist, tap this option, tap the 2 option and then use the up and
down arrows to view each blacklisted num ber.
Auto redial – Turn auto redial on or off.
IP dial – Create fixed IP dial num bers for specific contacts that you
always want to call using an IP num ber instead of a regular
telephone num ber.
47
Smartwatch Features
Call tim e display – Show or hide the call tim er on the Sm artwatch
display field.
l Call tim e rem inder – Turn on or off call tim e m essages that appear
at the end of each phone call you m ake. You can set the Call tim e
rem inder to display after every call (Single), after a specified
num ber of phone m inutes have been used (Periodic), or not at all
(O ff).
l Auto quick end – Used to lim it call tim es. W hen the length of a call
reaches the tim e lim it designated in the setting, the call ends
autom atically.
W hen you are done configuring the advanced settings, tap ‘Back’ to
save your changes.
l
6.
Reset Factory Settings
To reset your Sm artwatch so that all of your settings are replaced by the
default settings that were in place when the Sm artwatch was new, do the
following:
1.
2.
3.
4.
Tap
Tap
Tap
Use
the
the
the
the
Settings m enu.
>> (Forward) button again.
Res settings option in the top right corner of the screen.
stylus to tap out your Sm artwatch password‘1122’.
Note: This is a security feature that prevents unauthorized users from
erasing all of your settings without your perm ission.
5.
Tap ‘Yes’ to confirm that you want to reset the Sm artwatch to its factory
settings.
Services
All of the features listed in this section are available through the Services
m enu on the Sm artwatch. To access the Services m enu, do the following:
1.
Tap the default (analog) watch display.
2.
3.
O n the digital watch display that appears, tap the
(M enu) button.
Tap the >> (Forward) button in the bottom left corner of the screen 6
tim es
The Services m enu appears in the bottom right corner of the screen.
Internet Service
To set up and view internet services on the Sm artwatch, do the following:
48
SIMWATCH SSW01 -Smartwatch Manual
1.
2.
Tap the Services m enu.
Tap the Internet service option in the m enu.
The following services are available:
l
l
l
l
l
Hom epage— Tap this option to go to the internet hom epage you
have designated previously. If you have not yet set a hom epage,
the browser will display autom atically display the Yahoo.com
page.
Bookm arks — Tap this option to access your bookm arks.
Search or input URL— Tap this option to enter an internet address,
such as www.burgsm artwatch.com .
Recent Pages — Tap this option to view a list of the internet sites
you have viewed recently.
Settings — Tap this option to access the different internet settings
you can configure for your Sm artwatch. Details on each of these
settings are provided im m ediately below.
Data Account
To view, add, edit, or delete a data account for internet services on the
Sm artwatch, do the following:
1.
2.
3.
Tap the Services m enu.
Tap the Data account option in the m enu.
Select the type of account you want to use from the list of providers O R
click the O ptions button and enter a new provider m anually.
49
Smartwatch Features
Specification
FEATURES
Internal
M em ory
128M bits Storage /
64M bits RAM
External
M em ory
BO DY
DISPLAY
SO UND
M icroSD, up to 16GB
2G Network
Dim ensions
W eight
Type
Size
Color
Touch screen
Alert Types
Loudspeaker
M icro USB 2.0
M ax. output
voltage
850/900/1800/1900 M HZ
55.25 x 41.15x 14.53 m m
75 gram s
TFT
1.54 Inches
262K Color
Yes
Vibration, M P3, M P4
Yes
Yes
≤150 m V
Yes
3.0 +EDR
charging and data
transfer
M ax. 16GB M icro SD/TFlash (Not included)
M P3
Yes
Yes
Yes
Lithium -polym er
300 m Ah
2Hr 45m in
142 Hours
DATA
M ultim edia
Battery
Connection
G PRS
Bluetooth
USB
Supported
m em ory card
M usic support
M P3 Ringtone
FM Radio
Stero Speaker
Type
Capacity
Talk Tim e
Standby
Com patible
O perating
System
Interface
W indows ® XP/Vista™ /7/8
M icro USB 2.0
50