Download Siemens Pacemaker UM344-2 User's Manual

Transcript
UM344-2
APPENDIX A - FUNCTION BLOCK DESCRIPTIONS
The gain for this controller is fixed at a value of 1.00. While the displayed gain can be changed, it will not
affect the controller.
Equations
GE + F
O=
TIs + 1
AUTO when output O is connected to feedback F
TDs
1
O = +/-PG[P(1+
)-S] + [
(TD/DG)s + 1
MANUAL
]
TIs
O=F
Block Diagram, ID Controller
PV
TDs
TD
s+1
DG
+
+
+/-
1
+
+/-
GE
Output
TI s + 1
+
F
SP
X02880S0
A.9 FUNCTION BLOCK SUMMARY
SENSOR INPUT BLOCK
- Input Type
MV (Millivolts)..........................................Wide or Narrow
RTD .........................................................PT100 ohm DIN & US, PT200 ohm DIN & US, PT500
ohm DIN & US
T/C...........................................................J, K, E, T, R, S, B, N
Ohm .........................................................Wide or Narrow
- MV Units.......................................................Celsius, Fahrenheit, Rankine, Kelvin, MV, Ohms
- MV Range .....................................................LO and HI range values
- Damping ........................................................0 to 120 seconds
- Burnout Direction ...........................................Upscale or Downscale
OPERATOR DISPLAY BLOCK
- Local Display Code ........................................Percent, Process Variable, Measured Variable
September 1995
A-7