Download Quantum superloader 3 User's Guide

Transcript
Chapter 2 Media Changer Commands
Mode Sense (6) / (10) Command (1Ah/ 5Ah)
TapeAlert Page (1Ch)
2
Field Name
Description
Additional Page
Length
This field indicates the number of bytes in the page.
Note that this value does not include bytes 0 and 1.
The length is returned on MODE SENSE and must
subsequently be set to the same value when
performing MODE SELECT.
The SuperLoader 3 supports the TapeAlert Page that is used to set/change
the supported TapeAlert configuration options. Use the MODE SENSE
command to read the settings of the TapeAlert page.
Figure 38 TapeAlert Page
Format Descriptor
Bit
Byte
0
7
6
PS (0)
0
5
3
2
1
0
Rsvd
LogErr
Page Code (1Ch)
Additional Page Length (0Ah)
1
2
4
Perf
Reserved
DExcpt
Test
Reserved
3
MRIE
(MSB)
Interval Timer
(LSB)
4-7
MSB)
Report Count/Test Flag Number
8 - 11
Quantum SuperLoader 3 Software Interface Guide
(LSB)
53