Download Quantum DPM5500 User's Guide
Transcript
Chapter 2 Emulated Medium Changer SCSI Commands Request Sense (03h) Request Sense (03h) 2 The Request Sense command allows the host to receive sense data from the DX-Series system. The DX-Series system supports reporting of current errors only. A current error (error code 70h) is returned when the error was generated during the execution of a command indicating the check condition. The DX-Series system supports unit attention condition queuing as described in the SCSI-2 specification. Other details of processing for this command are consistent with the SCSI-2 specification. The format of the Request Sense command is shown in table 51. • Logical Unit Number The Logical Unit Number is 0. This field indicates the logical unit to which the command is sent. Table 51 Request Sense Command Bit/Byte 7 6 4 3 2 1 0 Operation Code (03h) 0 1 5 Logical Unit Number Reserved (00h) 2 Reserved (0000h) 3 • 4 Allocation Length 5 Reserved (00h) Allocation Length This field contains the maximum amount of data that may be returned to the host. Anything greater than 24 returns the full 24 bytes of data. The format of the Request Sense data is shown in table 52. Quantum DX-Series Software Interface Guide 75