Download Philips VR558 User's Manual

HE474ED(EN).QX3
03.2.22
5:47 PM
Page 7
Setting the language
Setting the RF out channel
You have the option of setting one of the displayed languages for the on-screen menu
(OSD).
1. Switch on the TV. If required, select the programme number for the video recorder.
2. Press MENU . The main menu will appear.
In some reception locations it is possible that a
TV channel will be sent on the same or similar
frequency as the video recorder.
Result: As soon as the video recorder is
switched on, the reception quality for this or several other TV channels will decrease.
The following steps will show you how to change
the pre-set 'transmission' (RF out channel) frequency on the video recorder.
3. Select 'INITIAL SET UP' with
STOP C-L
and confirm with
4. Select 'LANGUAGE' with
STOP C-L
FWD 1- B
PLAY B-K
and confirm with
or
PLAY B-K
.
What is RF out channel?
This electronic component in the video recorder
allows the device to transmit audio and video
signals via the aerial cable. These signals can
be received on a TV set just like TV channels.
What is RF out channel frequency?
This frequency or channel indicates the channel
on which the audio or video signal is transmitted.
or
FWD 1- B
.
1. Switch on the TV. If required, select the programme number for the video recorder.
5. Select the desired language with
.
6. To end, press
PLAY B-K
2. Press MENU . The main menu will appear.
3. Select 'INITIAL SET UP' with PLAY B-K or
or
STOP C-L
STOP C-L
STATUS/EXIT
and confirm with
4. Select 'RF OUT' with
.
and confirm with
Setting the clock
and confirm with
4. Select 'CLOCK' with
and confirm with
FWD 1- B
PLAY B-K
FWD 1- B
or
.
STOP C-L
.
or
5. Press
6. Press
.
, STOP C-L or 0..9 to select a
free (not allocated) channel between channel
22 and 69 in your area.
7. Press FWD 1- B .
.
STOP C-L
.
5. Check the time in 'TIME'. If required, please
.
6. Check 'DAY', 'MONTH' and 'YEAR' in the
STATUS/EXIT
FWD 1- B
PLAY B-K
If you cannot get an interference-free picture
and sound, switch the built-in modulator off.
Press STOP C-L repeatedly until "--" appears
next to "RF OUT CH" on the TV screen.
Then confirm with FWD 1- B . In that case,
please connect your VCR to your TV with a
Scart cable.
END=EXIT
0..9
36
K
END=EXIT
DATE --/--/--
same way.
7. To end, press
FWD 1- B
→RF OUT CH
TV SYSTEM
TIME --:--
change the time with
PLAY B-K
SELECT K L CHOOSE B
If the display shows an incorrect time or ' --:-- ',
the time and date must be reset manually.
1. Switch on the TV. If required, select the programme number for the video recorder.
2. Press MENU . The main menu will appear.
3. Select 'INITIAL SET UP' with PLAY B-K or
STOP C-L
FWD 1- B
8.Select
'TV system' with PLAY B-K or
8.
'K' or 'G' with FWD 1- B .
9.Choose
9.
10.To
10. end, press STATUS/EXIT .
.
7
STOP C-L
.
EN