Download Pelco DVR5100 User's Manual

ACTIVATING RELAYS
The DVR5100 remote client can be used to activate output relays manually. A relay can be activated for a predetermined period of time (the dwell
time), or it can remain latched until there is another signal to release the relay.
To activate a relay:
1. Go to Tools > Activate Relay (Ctrl+Alt+R). The Select Relay dialog box opens (refer to Figure 36).
2. Click Expand
.
3. Click the option button beside the relay you want to activate.
4. Click Activate to activate the selected relay, click Cancel to exit without activating the relay, or click Clear Selection to deactivate a
previously selected relay.
Figure 36. Activating a Relay
C1697M-B (11/08)
39