Download NEC N8406-023 Command Reference Guide

Table 164 TCP/UDP Filter Configuration Menu options
Command
Description
sport <1-65535> <port mask>
Defines a source port for the ACL. If defined, traffic with the specified TCP
or UDP source port will match this ACL. Specify the port number. Listed
below are some of the well-known ports:
Number
Name
20
ftp-data
21
ftp
22
ssh
23
telnet
25
smtp
37
time
42
name
43
whois
53
domain
69
tftp
70
gopher
79
finger
80
http
Defines a destination port for the ACL. If defined, traffic with the specified
TCP or UDP destination port will match this ACL. Specify the port number,
just as with sport above.
Defines a TCP/UDP flag for the ACL.
dport <1-65535> <port mask>
flags <value (0x0-0x3f)>
<mask>
reset
cur
Resets the TCP/UDP parameters for the ACL to their default values.
Displays the current TCP/UDP Filtering parameters.
ACL Meter configuration
Command: /cfg/acl/acl <ACL number>/meter
[Metering Menu]
cir
mbsize
enable
dpass
reset
cur
-
Set committed rate in KiloBits/s
Set maximum burst size in KiloBits
Enable/disable port metering
Set to Drop or Pass out of profile traffic
Reset meter parameters
Display current settings
This menu defines the metering profile for the selected ACL.
Table 165 ACL Meter Configuration Menu options
Command
Description
cir <64-1000000>
Configures the committed rate, in Kilobits per second. The committed rate
must be a multiple of 64. The default value is 64.
Configures the maximum burst size, in Kilobits. Enter one of the following
values for mbsize: 32, 64, 128, 256, 512, 1024, 2048, 4096
The default value is 32.
Enables or disables metering on the ACL. The default is disabled.
Configures the ACL Meter to either drop or pass out-of-profile traffic.
Reset ACL Metering parameters to their default values.
Displays the current ACL metering parameters.
mbsize <32-4096>
enable e|d
dpass drop|pass
reset
cur
N8406-023 1Gb Intelligent L3 Switch Command Reference Guide (AOS)
143