Download Lifetime 65004 User's Manual

Hardware Needed:
BB (3)
´6RFNHW:UHQFK
BF
(3)
´:UHQFK
BD (1)
Rubber Mallet
Hardware Bag: 1022647
Hardware Bag: 1018013
4.5.66WDUWLQJDWWKHERWWRPKROHVHFXUHWKH5LJKW5HDU6LGH([WHQVLRQ3DQHOWRWKH
6LGH3DQHODQG5HDU6LGH3DQHO%UDFNHWXVLQJWKUHH3/8”-16 x 2 1/2” Hex Bolts
(BB)RQH3/8” Flat Washer (BD) DQGWKUHH3/8”-16 Nylock Nuts (BF).
Note: If necessary, after aligning the holes gently tap the Bolts with a Rubber Mallet
or Hammer to help pass them through the holes.
4.5.7 Tighten all hardware from steps 4.2.3 - 4.5.6, but do not overtighten.
BD
BB
BF
BD
Remember: Tighten all hardware
before proceeding to the next step,
but do not overtighten.
31