Download LG MS323 Quick Start Guide
Transcript
1 Connect the USB Adapter and USB cable (as shown on the previous page). 2 Plug the USB cable (as shown on the next image) into the phone’s Charger/Accessory Port. NOTE The battery must be fully charged initially to improve battery lifetime. NOTE Your phone has an internal antenna. Be careful not to scratch or damage this rear area, as that will cause loss of performance. When charging your phone with a fully discharged battery, the keypad LED will briefly flash indicating charging is occurring in a mode designed to prevent battery damage. The blinking will stop and normal charging will commence once a sufficient minimum charge has been established. Internal Antenna 9
This document in other languages
- español: LG MS323