Download JVC XV-M565BK User's Manual
Transcript
XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521 -013A DVD VIDEO PLAYER XV-M565BK/XV-M567GD TV CHOICE DISC 1 DISC 2 DISC 3 SUBTITLE AUDIO DIGEST ANGLE STROBE DVD DISPLAY ZOOM 2 3 TV 2 TV 3 4 5 TV 5 TV 9 0 +10 TV -/-- TV 0 B.SKIP PAUSE Basic operations 17 Advanced operations 21 Karaoke operation 36 Initial settings 43 Additional information 49 TV ch TV/VIDEO 3D PHONIC THEATER POSITION F.SEARC H PLAY STOP STANDBY STANDBY/ON DVD 3 3 DVD 2 2 DVD 1 F.SKIP MIC1 ENTE MIC2 1 R RESERV AOKE KAR MENU TITLE CURSOR STOP PAUSE E MIN UP LEFT 12 SHUTTLE DVD PLAYER TV VOL CANCEL H B.SEARC Getting started 9 PLAY MODE RETURN SHIFT 4 6 8 TV 8 10 AMP VOL Preliminary knowledge TV 6 7 TV 7 SLOW 1 TIME 1 TV 1 TV 4 Introduction MAX MIN RESERVE MAX DISC TITLE CHAP RIGHT MIC1 RESUME THEATER DVD EACH MIC2 DOWN DOLBY D I G I T A L KARAOKE ON/OFF PLAY 1 2 3 4 5 6 7 8 9 10 0 SKIP +10 CANCEL DVD / SUPER VIDEO CD / VIDEO CD / CD REMOTE CONTROL VIDEO CD INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located on the rear, bottom or side of the cabinet. Retain this information for future reference. Model No. Serial No. LVT0521-013A [UB, US, 3U, 4U, UX] XV-M565BK[U....]COVER/3 1 7/4/00, 3:38 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521 -013A Warnings, Cautions and Others button! Caution –– CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. Disconnect the mains plug to shut the power off completely. The button in any position do not disconnect the mains line.The power can be remote controlled. IMPORTANT FOR LASER PRODUCTS REPRODUCTION OF LABELS 1 CLASSIFICATION MARK, PLACED ON REAR ENCLOSURE CLASS LASER 1 PRODUCT 2 WARNING LABEL, PLACED INSIDE THE UNIT CAUTION: Invisible laser radiation when open and interlock failed or defeated. AVOID DIRECT EXPOSURE TO BEAM. (e) 1. CLASS 1 LASER PRODUCT 2. DANGER: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 3. CAUTION: Do not open the top cover. There are no user serviceable parts inside the Unit; leave all servicing to qualified service personnel. VARNING: Osynlig laserstrålning när denna del är öppnad och spärren är urkopplad. Betrakta ej strålen. (s) ADVARSEL: Usynlig laserstråling ved åbning, når sikkerhedsafbrydere er ude af funktion. Undgå udsættelse for stråling (d) VARO: Avattaessa ja suojalukitus ohitettaessa olet alttiina näkymättömälle lasersäteilylle. Älä katso säteeseen. (f) Caution: Proper Ventilation To avoide risk of electric shock and fire and to protect from damage. Locate the apparatus as follows: Front: No obstructions open spacing. Sides: No obstructions in 3 cm from the sides. Top: No obstructions in 5 cm from the top. Back: No obstructions in 15 cm from the back Bottom: No obstructions, place on the level surface. Spacing 15cm or more Front XV-M565BK XV-M567GD Wall or Stand height 5cm or more obstructions Floor XV-M565BK[U....]SAFETY/3 2 7/4/00, 3:39 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521 -013A Introduction English Table of contents Français Introduction Page 1 Features ............................................................................. 1 Supplied accessories ........................................................ 1 About this instruction manual ........................................ 2 Notes on handling ............................................................ 3 Preliminary knowledge Page 4 Front panel .............................................................................. Remote control unit ............................................................... Display window ...................................................................... Rear panel ............................................................................... 4 5 7 7 Operational Principles To playback in the desired order [PROGRAM] .................. 27 To playback in random order [RANDOM] .......................... 28 Repeat playback To repeat the current selection or all disc contents [REPEAT] ............................................................................. 28 To repeat a desired part [A-B REPEAT] .............................. 29 To select a scene angle from the normal screen [ANGLE] ............................................................................... 30 To select a scene angle from the angle list display [ANGLE] .............................................................................. 31 Changing the language and sound On-screen displays ................................................................. 8 To prevent the monitor from burning out [SCREEN SAVER] ............................................................... 10 On-screen guide icons ......................................................... 10 How to use numeric buttons ............................................... 10 About discs Playable disc types ............................................................... 11 Disc structure ........................................................................ 11 Page 12 Connections Before making any connections ......................................... To connect to a TV ................................................................ To connect to a TV with the component video input jacks ........................................................................... To connect to an audio amplifier or receiver .................... To connect to audio equipment with a digital input ........ To connect the power cord .................................................. 12 12 13 13 14 14 Using the remote control unit To install batteries in the remote control unit ................... 15 To use the remote control unit for TV operation .............. 16 To control the volume of a JVC’s amplifier or receiver ... 16 Basic operations Changing the playback order Selecting a scene angle of DVD VIDEO Names of parts and controls Getting started To playback in slow-motion [SLOW] .................................. 26 To zoom a scene [ZOOM] .................................................... 26 Page 17 Turning on/off the unit .................................................. 17 Inserting and removing discs ........................................ 17 Basic playback To start playback .................................................................. 18 To stop playback completely ............................................... 18 To stop playback temporarily ............................................. 18 To advance or reverse playback rapidly while monitoring ................................................................ 19 To locate the beginning of the scene or song ................... 19 Resuming playback To memorize the interrupted position ............................... 20 To resume playback ............................................................. 20 To select the subtitle language [SUBTITLE] ...................... 31 To change the audio language or sound [AUDIO] ........... 32 Selecting the picture character To select the picture character [THEATER POSITION] ..... 33 Enjoying virtual surround sound To simulate surround sound [3D PHONIC] ........................ 33 Checking the status To check the disc/time information .................................... 34 To check the DVD function status ....................................... 35 KARAOKE operation Page 36 Preparation Turning on the KARAOKE function .................................... 36 Connecting microphones .................................................... 36 Reserving songs To playback songs reserved ................................................ 37 Selecting audio Selecting audio track(s) [AUDIO] ........................................ Selecting Karaoke sound [KARAOKE SOUND] ................. Masking the vocal recorded on a disc [VOCAL MASK] ... Playing back the guide vocal only when you stop singing [VOCAL REPLACE] ................................................ 38 38 39 40 Adding an effect to your voice Adding an echo effect [ECHO] ............................................ 41 Adding various effects to the vocal [VOCAL EFFECT] ..... 41 Shifting the musical key Operating the front panel .................................................... 42 Operating the front remote control unit ............................ 42 Initial settings Page 43 Selecting preferences How to set preferences ........................................................ 43 LANGUAGE page ................................................................. 43 AUDIO page .......................................................................... 44 DISPLAY page ....................................................................... 45 SYSTEM page ....................................................................... 46 Limiting playback by children Advanced operations Page 21 Playing from a specific position on a disc To locate a desired scene from the DVD menu ................. To locate a desired scene from the menu of the Video CD/SVCD with PBC ........................................... To locate a desired selection using the numeric buttons .. To locate a desired selection using 4 or ¢ ................. To locate a desired scene by specifying the chapter number [CHAP. SEARCH] .................................................. To locate a desired position in the current title or track [TIME SEARCH] .................................................................. To locate a desired scene from the digest display [DIGEST] .............................................................................. 21 21 22 22 To set Parental Lock for the first time [PARENTAL LOCK] . 47 To change the settings [PARENTAL LOCK] ........................ 48 To temporarily release the Parental lock [PARENTAL LOCK] ............................................................. 48 Additional information Page 49 AV COMPU LINK remote control system 24 Connection and setup .......................................................... 49 Operation .............................................................................. 50 Care and handling of discs ............................................. 51 Troubleshooting ............................................................... 52 Specifications ................................................................... 53 To advance a still picture frame-by-frame ......................... 25 To display still pictures [STROBE] ...................................... 25 Table of languages and their abbreviations .. Appendix A Country code list for parental lock .................. Appendix B 23 23 Special picture playback XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521 -013A Introduction Introduction Features Supplied accessories Picture functions • Audio/video cable (x 1) 7 Strobe function The unit can display nine continuous still pictures on the TV screen. 7 Digest function Introduction You can select the desired title from the opening scenes displayed on the TV screen. • S-video cable (x 1) 7 Angle function* You can select a desired angle from multiple camera angles recorded on the DVD VIDEO disc. 7 Zoom function You can view scenes close-up. • AV compulink cord (x 1) 7 Parental lock* You can restrict the playback of DVD VIDEO discs with scenes which you do not want children to see, such as adult or violent films. 7 Theater position You can select the picture character according to the lighting of your room. • Remote Control Unit (x 1) CH DISCOI CE 1 SU BT Audio functions 7 TV RE SLO 10 TU TV 0 PL SH B.S 3D TU TV TV TV DISC TV TV TV 3 TIME 3 6 9 0+ TV EA /VID C EO POTHEA SITI TE ON R H KIP RC U EN R TE UP OR M RS WN EN CU DO RIG HT RE MO TE CO NT RO L 7 Surround function* The unit accommodates the Dolby Digital surround, DTS surround and MPEG Multichannel system. (These surround signals are output only from the DIGITAL OUT jacks.) • R6P(SUM-3)/AA(15F) batteries (x 2) 7 3D Phonic function You can enjoy surround sound with your 2-channel system. • Instruction manual (x 1) Other functions 7 Triple disc trays You can insert up to three discs in the unit and can playback them continuously. 7 Multi-language subtitles and sound* You can select a subtitle or sound language from those recorded on the DVD VIDEO disc. 7 Multi-disc playback You can enjoy Audio CD discs, Video CD and SVCD discs, as well as DVD VIDEO discs. • AC power cord (x 1) • AC plug adaptor (x 1) (except Hong Kong) 7 Operation from the on-screen display User-friendly on-screen displays allow you to operate the unit easily. Functions with (*) mark only work on a DVD VIDEO disc that is compatible with each function. 1 EN01-03.XV-M565BK[U....]/3 1 7/4/00, 3:41 PM TV PO D PO W WER ER DV DISP OM 6 3 GLE ZO 2 9 0 AN BE 5 +1 10 2 2 DIO RO TV ch RN ONI F.S LE FT RE PH ¢ You can enjoy high quality sound with Dolby Digital or Linear-PCM. EL PL 3 AY OP ST 8 0 VOTV L MO DE NC H ST 7 F.S 7 High quality digital sound CA RC 8USE E AY IFT EA B. SK IP 4 PA TV AU ST 5 8 TV A VO MP L 1 1 4 7 RN W TITL TV TV DISC ITLE DIGE 4 LA Y XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521 -013A Introduction English About this instruction manual Français This instruction manual basically explains operations as follows: To playback in random order [RANDOM] 10 0 TV -/-- +10 TV 0 AMP VOL SLOW 1 CANCEL CH B.SEAR F.SKIP STOP PAUSE TV/VIDEO 3D PHONIC THEATER POSITION F.SEAR CH PLAY B.SKIP TV ch TV VOL PLAY MODE RETURN SHIFT 3 ENTE R RESERV E KARAOK MENU TITLE E UP LEFT CURSOR RIGHT DOWN 2 REMOTE CONTROL 7 While stopped 1 Press PLAY MODE - CANCEL. The play mode menu appears on the TV screen. 2 The number indicates the procedural step. Use CURSOR 2/3 to move [RANDOM]. REPEAT Introduction You can play titles or tracks on discs inserted in random order by using the Random function. These symbols indicate the types of discs which the operation can be used for. PROGRAM The number indicates the following procedural step(s) in which the button(s) is(are) used. You may also use the corresponding buttons on the front panel of the unit if available. to RANDOM The “RANDOM” indicator appears in the display window on the front panel. 3 Press ENTER. The unit starts random playback of the selected disc. When all titles/tracks of the disc have been played once, the unit starts random playback of the next disc (if inserted). After playing all titles/tracks of the second disc, the unit starts random playback of the third disc (if inserted). After playing all titles/tracks of all the discs, random playback ends. Other convenient procedures, etc. The names of buttons on the remote control unit (or on the front panel of the unit) are all given in uppercase letters. The same title or track will not be played back more than once during random play. • To stop/quit random playback in the middle Press STOP to stop playback. The unit is still in random playback mode, so pressing PLAY starts random playback again. To quit random playback, press STOP again while stopped. The “RANDOM” indicator in the display window turns off. NOTE Additional supplemental remarks • Some DVD VIDEO discs may not be played back correctly in the random mode. 2 EN01-03.XV-M565BK[U....]/3 2 7/4/00, 3:41 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521 -013A Introduction Introduction Notes on handling Important cautions Safety precautions Installation of the unit Avoid moisture, water and dust • Select a place which is level, dry and neither too hot nor too cold (between 5˚C and 35˚C, 41˚F and 95˚F). • Leave sufficient distance between the unit and the TV. • Do not use the player in a place subject to vibrations. Do not place the unit in moist or dusty places. Power cord • Do not handle the power cord with wet hands! • A small amount of power (2.7 W) is always consumed while the power cord is connected to the wall outlet. • When unplugging the player from the wall outlet, always pull the plug, not the power cord. To prevent malfunction of the unit • There are no user-serviceable parts inside. If anything goes wrong, unplug the power cord and consult your dealer. • Do not insert any metallic object into the unit. • Do not use any non-standard shape disc available on the market, because it may damage the unit. • Do not use a disc with tape, seals, or paste on it, because damage to the unit may result. Avoid high temperatures Do not expose the unit to direct sunlight or place it near a heating device. When you’re away When away on travel or otherwise for an extended period of time, remove the plug from the wall outlet. Do not insert foreign objects into the unit Do not insert wires, hairpins, coins, etc. into the unit. Do not block the vents Blocking the vents may damage the unit. Care of the cabinet When cleaning the unit, use a soft cloth and follow the relevant instructions on the use of chemically-coated cloths. Do not use benzene, thinner or other organic solvents and disinfectants. These may cause deformation or discoloring. Note about copyright laws • Please check the copyright laws in your country before recording from DVD VIDEO, Audio CD, Video CD and SVCD discs. Recording of copyrighted material may infringe copyright laws. If water gets inside the unit Turn off the power switch and remove the plug from the wall outlet, then call the store where you made your purchase. Using the unit in this state may cause a fire or electrical shock. Note about the copyguard system • The DVD VIDEO disc is protected by the copyguard system. When you connect the unit to your VCR directly, the copyguard system activates and the picture may not be played back correctly. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Manufactured under license from Dolby Laboratories. “Dolby” and double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. © 1992-1997 Dolby Laboratories, Inc. All rights reserved. Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 and other world-wide patents issued and pending. “DTS”, “DTS Digital Surround”, are trademarks of Digital Theater Systems, Inc. © 1996 Digital Theater Systems, Inc. All rights reserved. 3 EN01-03.XV-M565BK[U....]/3 3 7/4/00, 3:41 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521 -013A Preliminary knowledge Preliminary knowledge English Names of parts and controls Français Refer to the corresponding pages indicated in () for details. Front panel 1 button 4 DVD 1 to DVD 3 trays 2 STANDBY indicator 5 0 (OPEN/CLOSE) buttons SHUTTLE DVD PLAYER STANDBY DVD 3 DVD 2 DVD 1 STANDBY/ON MIC1 MIC2 3 2 1 STOP PAUSE MIN MAX MIC1 MIN MAX RESERVE DISC TITLE CHAP MIC2 RESUME THEATER DOLBY PLAY 1 KARAOKE ON/OFF DVD EACH D I G I T A L Preliminary Knowledge 6 1 through 3 (DISC) buttons with indicators 7 SHUTTLE knob 3 Key control buttons ( , , ) 2 3 4 5 0 SKIP 6 7 8 9 10 +10 CANCEL DVD / SUPER VIDEO CD / VIDEO CD / CD $ MIC 1/2 jacks % MIC 1/2 level controls ~ KARAOKE ON/OFF button ! Display window # CANCEL button @ RESERVE button 1 8 Numeric buttons 9 # (PLAY) button 0 4/¢ (SKIP) buttons - 8 (PAUSE) button = 7 (STOP) button 8 Numeric buttons button (17) Turns the unit on or off (standby). 2 STANDBY indicator Lights when the power cord is connected and the unit is on standby. When the unit is turned on, the STANDBY indicator goes off. 3 Key control buttons (42) Used to shift the musical key of a song being played to match with your voice. # raises the key, and lowers the key. returns to the original (normal) key. 4 DVD 1 to DVD 3 trays (17) Used to load discs. To insert/remove discs, press the 0 (OPEN/CLOSE) button located on the right of the tray corresponding to disc number. 5 0 (OPEN/CLOSE) buttons (17) Used to open and close disc trays 1 to 3 respectively. When, after opening the DVD1 tray, another 0(OPEN/CLOSE) button is pressed, the DVD1 tray is first closed, then the other DVD tray selected is opened. 6 1 through 3 (DISC) buttons with indicators (18) Used to start playback of the disc in the tray corresponding with the number indicated on the button (these function the same as the DISC 1 through 3 buttons on the remote control unit). While playing, the corresponding indicator blinks. In this manual, they are sometimes called “DISC” buttons. 7 SHUTTLE knob (19, 26) Performs rapid advance/reverse playback operations. Also used for slow-motion playback of a picture (for DVD Video/Video CD/SVCD). Mainly used to select title/track numbers when reserving songs for karaoke or starting from a desired title/track. 9 # (PLAY) button (18) Starts playback. Also used as a SELECT button for the PBC of Video CDs/SVCDs. 0 4/¢ (SKIP) button (19) Used to skip chapter, title or track. Also used for the page selection of a menu screen (for Video CD/SVCD). Holding down 4 or ¢ during playback reverses or advances playback rapidly. - 8 (PAUSE) button (18) Pauses playback. = 7 (STOP) button (18) Stops playback. ~ KARAOKE ON/OFF button (36) Turns the karaoke function on or off. ! Display window Indicates the current status of the unit. @ RESERVE button (37) Used to reserve songs to be played back for karaoke. # CANCEL button (37) Cancels reserved songs for karaoke, as well as erases the last selection for program playback. $ MIC 1/2 jacks (36) Used to connect microphones. % MIC 1/2 level controls (36) Used to control the input level of microphones connected to the MIC 1/2 jacks. EN04-11.XV-M565BK[U....]/3 4 7/4/00, 3:43 PM 4 XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521 -013A Preliminary knowledge Remote control unit ~ Infrared signal-emitting window 1 DISC 1 - CHOICE, DISC 2 and DISC 3 buttons TV CHOICE DISC 1 DISC 2 DISC 3 ! DVD SUBTITLE AUDIO Preliminary Knowledge 2 SUBTITLE - DIGEST button 3 AUDIO - STROBE button 4 Numeric buttons 5 SLOW button DIGEST 0 8 (PAUSE) button DISPLAY ZOOM TIME STROBE 1 2 3 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 9 TV 7 TV 8 TV 9 10 0 +10 TV -/-- TV 0 AMP VOL SLOW CANCEL SHIFT CH .SEAR B.SKIP 4 PAUSE 8 3D PHONIC THEATER POSITION F.SEA RCH PLAY F.SKIP 3 STOP 7 ¢ ENTE R RESE KE KARAO - TITLE-KARAOKE button TV ch TV VOL PLAY MODE RETURN TV/VIDEO B 9 4 (B.SKIP) - B. SEARCH button ANGLE TV 1 6 AMP VOL button 7 SHIFT button 8 PLAY MODE - CANCEL button DVD RVE MENU TITLE LEFT $ TV ch button % TV VOL button ^ TV/VIDEO - THEATER POSITION button & RETURN - 3D PHONIC button * ( ) _ ¢ (F.SKIP) - F. SEARCH button 3 (PLAY) button ENTER button 7 (STOP) button + MENU-RESERVE button CURSOR RIGHT DOWN REMOTE CONTROL 5 EN04-11.XV-M565BK[U....]/3 5 button @ DISPLAY - TIME button # ANGLE - ZOOM button UP = CURSOR (5 UP, ∞ DOWN, 2 LEFT, 3 RIGHT) button - TV 7/4/00, 3:43 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521 -013A Preliminary knowledge English Français Used to start playback of a disc in the corresponding tray (DVD1 through DVD3), as same as the 1 through 3 buttons on the front panel. In addition, pressing the DISC 1 button while holding the SHIFT button brings up the Preference on-screen display on the TV screen. 2 SUBTITLE - DIGEST button (24, 31) Used to display the subtitle selection display on the TV screen, as well as used to turn the subtitle on or off (for DVD VIDEO). Pressing this button while holding down the SHIFT button displays beginning scenes of each title, chapter or track on the TV screen (for DVD VIDEO/Video CD/SVCD). 3 AUDIO - STROBE button (25, 32) Selects the audio (for DVD VIDEO/Video CD/SVCD). Pressing this button while holding down the SHIFT button displays nine continuous still pictures (for DVD VIDEO/ Video CD/SVCD). 4 Numeric buttons (10, 16) Used to select a title or track number, as well as used to enter a time for the Time search and a chapter number for the Chapter search. Also used to select a TV channel in conjunction with the SHIFT button. 5 SLOW button (26) Used for slow-motion playback of a picture (for DVD VIDEO/ Video CD/SVCD). 6 AMP VOL button (16) Used to control the volume of a JVC audio amplifier/ receiver. 7 SHIFT button Used together with other buttons for activating their secondary functions. 8 PLAY MODE - CANCEL button (27~30) Displays an on-screen display for controlling the advanced playback functions. Pressing this button while holding down the SHIFT button cancels reserved songs for karaoke, as well as erases the last selection for program playback. 9 4 (B.SKIP) - B. SEARCH button (19, 22) Skips back a chapter, title or track. Also used for the page selection of a menu screen (for DVD VIDEO/Video CD/ SVCD). Holding down this button during playback reverses playback rapidly. Pressing the button while holding down the SHIFT button also reverses playback rapidly. If you press the button while holding down the SHIFT button during rapid reverse playback, the speed increases. 0 8 (PAUSE) button (18) Pauses playback. - TITLE-KARAOKE button (21, 36) Displays the title menu of a DVD VIDEO disc on the TV screen. Pressing this button while holding down the SHIFT button turns the karaoke function of or off. = CURSOR (5 UP, ∞ DOWN, 2 LEFT, 3 RIGHT) buttons ~ Infrared signal-emitting window Point this window toward the remote sensor on the front panel when pressing buttons. ! DVD - TV button (16, 17) Turns the unit on or off (standby). Pressing this button while holding down the SHIFT button turns the TV on or off. Preliminary Knowledge 1 DISC 1 - CHOICE, DISC 2 and DISC 3 buttons (18) @ DISPLAY - TIME button (34, 35) Displays the status information (only for DVD disc) or the time information (for any disc types). When the time information appears, pressing this button while holding the SHIFT button changes the time mode. When the karaoke function is active, pressing this button brings up the karaoke menu. # ANGLE - ZOOM button (26, 31) Changes camera angles during playback of a DVD VIDEO disc containing multiple camera angles. Pressing this button while holding down the SHIFT button zooms in the picture (for DVD VIDEO/Video CD/SVCD). $ TV ch button (16) Changes the TV channels. % TV VOL button (16) Adjusts the TV volume. ^ TV/VIDEO - THEATER POSITION button (16, 33) Switches the TV input mode. By pressing the button while holding down the SHIFT button, you can select the Theater position mode for matching the picture character to your taste. & RETURN - 3D PHONIC button (21, 33) Returns to the previous menu (for DVD VIDEO/VIdeo CD/ SVCD). By pressing the button while holding down the SHIFT button, you can select the 3D Phonic mode for simulating the surround effect. * ¢ (F.SKIP) - F. SEARCH button (19, 22) Skips forward a chapter, title or track. Also used for the page selection of a menu screen (for DVD VIDEO/Video CD/ SVCD). Holding down this button during playback advances playback rapidly. Pressing the button while holding down the SHIFT button during playback also advances playback rapidly. If you press the button while holding down the SHIFT button during rapid advance playback, the speed increases. ( 3 (PLAY) button (18) Starts playback. Also used as a SELECT button for PBC of Video CD/SVCDs. ) ENTER button Executes the selected item in a menu or on-screen display. _ 7 (STOP) button (18) Stops playback. Also used to erase all the programmed tracks for the program play. + MENU-RESERVE button (21, 37) Displays a DVD menu on the TV screen. Pressing this button while holding down the SHIFT button displays the karaoke reservation table on the TV screen. Used to select an item form a menu or on-screen display, or to change the setting of an item in the on-screen display. 6 EN04-11.XV-M565BK[U....]/3 6 7/4/00, 3:43 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521 -013A Preliminary knowledge Display window 4 Disc indicator 5 Function indicator 1 Disc number indicator Shows the disc number being selected. 2 Title/chapter/track/key indicator 3D-PHONIC DISC TITLE CHAP. KEY TRACK PROGRAM RANDOM REPEAT 1A-B KARAOKE RESUME THEATER DVD VCD EACH REMAIN Preliminary Knowledge 1 Disc number indicator Usually displays the title/chapter, or track number. When you shift the musical key, the status is displayed. For example, if you lower the key two levels, the display shows “-2.” 3 Time display Shows the cumulative or remaining time of the track or disc, or the total disc time. 3 Time display 2 Title/chapter/track/ key indicator 4 Disc indicator Indicates the type of the disc set in the selected tray. When a DVD Video disc is set, “DVD” is indicated. When a Video CD or SVCD is set, “VCD” is indicated. When an Audio CD is set, there is no indication. 5 Function indicator Activated functions light up. Rear panel 1 VIDEO OUT jack 2 S-VIDEO OUT jack 3 VIDEO OUT SELECT (NTSC/PAL) switch 4 COMPONENT VIDEO OUT jacks (Y/PB/PR) VIDEO OUT COMPONENT VIDEO S-VIDEO Y PB AUDIO OUT AV COMPU LINK PR DIGITAL OUT PCM / STREAM VIDEO OUT SELECT NTSC PAL L COAXIAL AC IN OPTICAL ATTENUATOR OFF ON R 8 DIGITAL OUT jacks (COAXIAL/OPTICAL) 7 ATTENUATOR (ON/OFF) switch 9 AC IN connector 0 Region code label 6 AUDIO OUT jacks (L/R) 5 AV COMPU LINK jacks 1 VIDEO OUT jack (12) 7 ATTENUATOR (ON/OFF) switch (12) Outputs a composite video signal. 2 S-VIDEO OUT jack (12) Attenuates the audio output level when it is set to ON. 8 DIGITAL OUT jacks (COAXIAL/OPTICAL) (14) Outputs an S-video signal. Output digital audio signals. Both coaxial and optical connectors are provided. You must select the signal type correctly according to the external device connected to via the preference display. 3 VIDEO OUT SELECT (NTSC/PAL) switch (12) Selects NTSC or PAL according to the color system of your TV. 4 COMPONENT VIDEO OUT jacks (Y/PB/PR) (13) Outputs component video signals. 5 AV COMPU LINK jacks (49) Connects with other JVC equipment supporting the AV Compulink function to facilitate integrated operations. 9 AC IN connector (14) Connects to the wall outlet using the suppplied AC power cord. 0 Region code label (11) Shows region code number. 6 AUDIO OUT jacks (L/R) (12) Outputs stereo analog audio signals. 7 EN04-11.XV-M565BK[U....]/3 7 7/4/00, 3:43 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521 -013A Preliminary knowledge English Operational Principles Français On-screen displays The unit provides several on-screen displays. With some displays, you can set or select preferences or functions, while the others are display-only. Opening displays Preliminary Knowledge Opening display The Opening display appears automatically in some conditions. At the bottom, the following information are indicated depending on the unit’s status. • NOW READING: The unit is now reading the disc information (TOC). • REGION CODE ERROR!: The DVD VIDEO disc loaded cannot be played because the region code of the disc does not match the unit. • CHANGE = DISC 1: The unit is now changing the disc tray to DISC 1. • OPEN: The disc tray is now opening. • CLOSE: The disc tray is now closing. NOW READING Preference displays While the unit is stopped except when an Audio CD is loaded in the selected tray, pressing the DISC 1 CHOICE button while holding the SHIFT button brings up the preference display for setting the preferences. There are four pages: LANGUAGE, AUDIO, DISPLAY and SYSTEM as shown in the right. See page 43 for detailed information. LANGUAGE LANGUAGE AUDIO AUDIO DISPLAY SYSTEM LANGUAGE AUDIO ENGLISH DIGITAL AUDIO OUTPUT AUDIO LANGUAGE ENGLISH DOWN MIX SUBTITLE ENGLISH COMPRESSION ON SCREEN LANGUAGE ENGLISH KEY LANGUAGE /PCM Lo / Ro ON EXIT PRESS KEY SYSTEM AUDIO DISPLAY SYSTEM 4:3 LB MONITOR TYPE ON ON SCREEN GUIDE LANGUAGE AUDIO AUTO STANDBY MODE 2 SCREEN SAVER AV COMPULINK MODE SYSTEM OFF DVD 1 EXIT PRESS KEY DISPLAY OFF RESUME EXIT PRESS When no disc is inserted or a DVD VIDEO disc is stopped, pressing the ENTER button while holding down the SHIFT button brings up the PARENTAL LOCK display in which you can set the level for limiting playback. See page 47 for detailed information. SYSTEM DOLBY DIGITAL EXIT PRESS DISPLAY PARENTAL LOCK displays DISPLAY MENU LANGUAGE KEY PARENTAL LOCK PARENTAL LOCK MY Country Code Set Level — PASS WORD ---- EXIT PRESS KEY ENTER 8 EN04-11.XV-M565BK[U....]/3 8 7/4/00, 3:43 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521 -013A Preliminary knowledge Play mode displays Pressing the PLAY MODE button brings up the play mode display in which you can control playback functions. Different displays appear depending on the disc type and the unit’s status. While stopped During DVD VIDEO playback DVD CONTROL REPEAT PROGRAM RANDOM During Audio CD playback CHAP. SEARCH During SVCD/Video CD playback CD CONTROL VCD CONTROL REPEAT A-B REPEAT TIME SEARCH Preliminary Knowledge REPEAT A-B REPEAT TIME SEARCH REPEAT A-B REPEAT TIME SEARCH PBC CALL Status displays Pressing the DISPLAY-TIME button during playback brings up the status display. For a DVD VIDEO disc, pressing the DISPLAY-TIME button toggles between the DVD VIDEO function status display, and the disc/time display and off. For a SVCD/Video CD or Audio CD disc, pressing the DISPLAY-TIME button switches the disc/time display on and off. DVD VIDEO function status 1/2 Disc/time (DVD VIDEO ) 1/2 1/2 ENGLISH ENGLISH DISC Disc/time (Audio CD/SVCD/ Video CD without PBC) DISC 3 TRACK 1 TIME 00:08 EACH REMAIN 3 TITLE 1 CHAP. 25 TIME 2:25:25 BITRATE 3.3 Mbps Disc/time (SVCD/Video CD with PBC) DISC 3 TRACK 1 TIME 25:25 PBC Karaoke setting displays When karaoke mode is on, pressing the DISPLAY-TIME button brings up the karaoke menu display in which you can set several karaoke functions. Pressing MENU-RESERVE button while holding down the SHIFT button brings up the karaoke reservation display in which you can reserve songs to be played. Karaoke menu Karaoke reservation AUDIO KARAOKE SOUND VOCAL ECHO EFFECT KEY CONTROL 1/1 L+R NORMAL 2 OFF +0 9 EN04-11.XV-M565BK[U....]/3 9 7/4/00, 3:43 PM 1 2 3 4 5 6 XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521 -013A Preliminary knowledge English To prevent the monitor from burning out [SCREEN SAVER] Français A television monitor screen may be burned out if a static picture is displayed for a long time. To prevent this, the unit automatically activates the screen saver function if a static picture, such as an on-screen display or menu, is displayed for over 5 minutes. DVD/Super VCD/Video CD/CD PLAYER Preliminary Knowledge • Pressing any button on the unit or the remote control unit will release the screen saver function and return to the previous display. • You can select one of several screen saver modes available (see page 45). • The screen saver function is not activated during Audio CD playback or after stopping Audio CD playback. On-screen guide icons During DVD VIDEO playback, you may see icons displayed over the picture. These have the following meanings. : Displayed at the beginning of a scene recorded from multiple angles. (See page 30.) : Displayed at the beginning of a scene recorded with multiple audio languages. (See page 32.) : Displayed at the beginning of a scene recorded with multiple subtitle languages. (See page 31.) You can set the unit not to display on-screen icons above via the preference settings described on page 46. About invalid operation icon When you press a button, if the unit does not accept its operation, appears on your television screen. Operations are occasionally unacceptable even if is not displayed. Note that some operations may not be accepted. For example, some discs may not allow rapid advance/reverse or slow-motion playback. How to use numeric buttons DIGEST STROBE ZOOM TIME 1 2 3 TV 1 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 9 TV 7 TV 8 TV 9 10 0 +10 TV -/-- TV 0 To select a track/title number • To select a number between 1 and 10 Press the corresponding button for the number. • To select a number higher than 10 Use the +10 button. Examples: To select 13 To select 34 To select 40 +10 → 3 +10 → +10 → +10 → 4 +10 → +10 → +10 → 10 To enter a time or chapter number The method for entering a time for Time search or chapter number for Chapter search is different from above. See the corresponding sections in this manual for the details. To select a TV channel. You can use the buttons for selecting TV channels while holding down the SHIFT button. See page 16 for details. EN04-11.XV-M565BK[U....]/3 10 7/4/00, 3:43 PM 10 XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521 -013A Preliminary knowledge About discs Playable disc types Playable and non-playable disc types are as follows: Playable discs DVD VIDEO Video CD SVCD Audio CD Preliminary Knowledge VIDEO CD The DVD VIDEO Logo is a trademark. • DVD VIDEO players and DVD VIDEO discs have their own Region Code numbers. The unit can playback only DVD VIDEO discs whose Region code numbers include the unit’s Region code, which is indicated on the region code symbol on the rear panel. Examples of playable DVD VIDEO discs if the unit’s Region code is “2”: 2 ALL 2 3 4 5 25 123 456 Non-playable discs DVD-ROM, DVD-RAM, DVD AUDIO, DVD-R, DVD-RW, CD-ROM, PHOTO CD, CD-EXTRA, CD-G, CD-TEXT, CD-R, CD-RW • Playing back discs listed as “Non-playable discs” in the table above may generate noise and damage speakers. • This unit can play back audio recorded in CD-G, CD-EXTRA and CD-TEXT discs. Disc structure A DVD VIDEO disc is comprised of “titles,” while an Audio CD, Video CD or SVCD is comprised of “tracks.” Each title may be divided into some “chapters.” For example, if a DVD VIDEO disc contains some movies, each movie may have its own title number, and each movie may be divided into some chapters. In a DVD VIDEO karaoke disc, each song usually has its own title number and does not have chapters. In general, each title has independent content, while each chapter in the same title has continuity. (Example: DVD VIDEO disc) Title 1 Chapter 1 Chapter 2 Title 2 Chapter 3 Chapter 1 Chapter 2 (Example: Audio CD/Video CD/SVCD) Track 1 11 Track 2 Track 3 Track 4 XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521 -013A Getting started Getting started English Connections Français *In the following description, “TV” may be substituted with “monitor” or “projector.” *Before using the unit, you have to connect the unit to a TV and/or amplifier. Before making any connections • Do not connect the AC power cord until all other connections have been made. • Since different components often have different terminal names, carefully read the instructions supplied with the component you are going to connect. To connect to a TV The unit *If the TV has an AV COMPU LINK terminal, you can use the AV COMPU LINK function. See “AV COMPU LINK remote control system” on page 49 for details. VIDEO OUT COMPONENT VIDEO S-VIDEO Y PB AUDIO OUT AV COMPU LINK PR DIGITAL OUT PCM / STREAM VIDEO OUT SELECT NTSC Getting started You can enjoy using the unit by simply connecting it to a TV. To improve audio sound quality, connect the audio outputs to your separate audio equipment. (See the following pages.) PAL L COAXIAL S-video cable (supplied) OPTICAL ATTENUATOR OFF ON R TV Yellow IN White S-VIDEO Yellow Red VIDEO LEFT White AUDIO RIGHT Red Audio/video cable (supplied) Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video cables. • If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo audio output to monaural. • If your TV has an S-video input, you should connect it with the S-VIDEO output of the unit using the supplied Svideo cable in addition to the (standard) video connection to get better picture quality. Set the ATTENUATOR switch to OFF normally. If you hear audio sound distorted because the sensitivity of the audio input of your TV is too high, set the switch to ON. The unit is compatible with the PAL and NTSC color systems. Set the VIDEO OUT SELECT switch on the rear panel to match the color system of your TV. Make sure that the color system of the DVD/Video CD/SVCD disc labeled on the package matches your TV. If you use a multi-system TV, you can play discs recorded on both PAL and NTSC systems. NOTE • Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may cause a monitor problem when playing back a copy-protected disc. 12 EN12-16.XV-M565BK[U....]/3 12 7/4/00, 3:44 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521 -013A Getting started To connect to a TV with the component video input jacks You can enjoy high picture quality by connecting the unit’s COMPONENT VIDEO OUT jacks to the COMPONENT VIDEO IN jacks of your TV with the video cables. Green Blue Component video cable (not supplied) Red The unit VIDEO OUT COMPONENT VIDEO S-VIDEO Y PB AUDIO OUT AV COMPU LINK PR S-video cable (supplied) DIGITAL OUT PCM / STREAM VIDEO OUT SELECT NTSC PAL COAXIAL L Blue OPTICAL ATTENUATOR OFF ON Red Green R TV IN White Red S-VIDEO VIDEO White Getting started Y PB PR IN LEFT AUDIO RIGHT Red Audio cable (not supplied) • Connect “Y” to “Y,” “PB” to ”PB,” “PR” to “PR” correctly. NOTES • When the component video input jacks of the TV is of the BNC type, use an adapter to convert a pin jack to a BNC jack (optional). • If you do not connect the unit with the S-video cable, some functions of your TV may not work. To connect to an audio amplifier or receiver You can enjoy high-quality audio by connecting the unit's audio output to your amplifier or receiver. The unit VIDEO OUT COMPONENT VIDEO S-VIDEO Y PB AUDIO OUT AV COMPU LINK PR DIGITAL OUT PCM / STREAM VIDEO OUT SELECT NTSC PAL L COAXIAL OPTICAL ATTENUATOR OFF ON R Red Amplifier or receiver White White IN LEFT AUDIO RIGHT Red Audio cable (not supplied) • Connect the unit's AUDIO OUT to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier or receiver. 13 EN12-16.XV-M565BK[U....]/3 13 7/4/00, 3:44 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521 -013A Getting started English To connect to audio equipment with a digital input Français You can enhance the sound quality by connecting the unit’s DIGITAL OUT to the digital input of an amplifier, DAT or MD by using an optional digital cable. The digital audio signal from a disc is directly transferred. If you connect the unit to a Dolby Digital, DTS or MPEG Multichannel decoder or an amplifier with a built-in decoder by using an optional digital cable, you can enjoy high-quality surround sound. When you make the digital connection, also make the analog connection, because, depending on the disc type, no audio may be reproduced from the DIGITAL OUT. When using the DIGITAL OUT (OPTICAL) jack, remove the protection cap. Do not lose the removed cap. When the jack is not used, fix the protection cap into the jack. The unit VIDEO OUT COMPONENT VIDEO S-VIDEO Y PB AUDIO OUT AV COMPU LINK PR DIGITAL OUT PCM / STREAM VIDEO OUT SELECT NTSC PAL L COAXIAL OPTICAL ATTENUATOR OFF ON R Optical digital cable (not supplied) White Getting started Red Coaxial digital cable (not supplied) Digital equipment White IN IN OPTICAL LEFT AUDIO RIGHT DIGITAL COAXIAL Red Audio cable (not supplied) NOTES • When you connect the unit's DIGITAL OUT to digital audio equipment, before using, make the “DIGITAL AUDIO OUTPUT” setting in the “AUDIO” page of the preference display correctly according to the connected audio equipment. If the “DIGITAL AUDIO OUTPUT” is not set correctly, loud noise may be generated from speakers, causing damage to your speakers. See “DIGITAL AUDIO OUTPUT” on page 44. • With the digital connection, the unit’s settings for COMPRESSION and DOWN MIX in the AUDIO page of the preference display are invalid. Settings for these items must be made from the decoder. To connect the power cord When all the audio/video connections have been made, insert the smaller plug of the supplied AC power cord to the unit’s AC IN connector, then insert the other end to the wall outlet. Make sure that plugs are inserted firmly. The STANDBY indicator lights and setup is completed. NOTE The unit automatically accommodates AC power between 110 V and 240 V. You do not need any setting to match the unit with your local power voltage. Warning • • • • • Disconnect the power cord if you are not going to use the unit for a long time. Disconnect the power cord before cleaning the unit. Disconnect the power cord before moving the unit. Do not connect or disconnect the power cord with wet hands. Do not pull the power cord when disconnecting it, as this may damage the cord and cause fire, electric shock, or other accidents. Caution • Do not damage, alter, twist, or pull the power cord, as this may cause fire, electric shock, or other accidents. • To prevent any accidents or damages caused by an unsuitable AC power cord, only use the supplied power cord. If the cord is damaged, contact a dealer and get the new power cord. • Do not put anything heavy, or the unit, on the power cord, as this may cause fire, electric shock, or other accidents. 14 EN12-16.XV-M565BK[U....]/3 14 7/4/00, 3:44 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521 -013A Getting started Using the remote control unit Using the remote control, you can operate not only all the functions of the unit but also basic functions of your TV and the volume control of a JVC amplifier/receiver. To install batteries in the remote control unit The battery compartment is located on the back of the remote control unit. Press down the point shown by the arrow at the top of the compartment cover, and pull it up to open the cover. 2 Place the two accessory R6P (SUM-3)/AA(15F) batteries in the remote control according to the polarity markings (“+” and “–”) inside the compartment and on the batteries. 3 Place the cover over the compartment, and press down lightly. Getting started 1 • The batteries will last about six months with normal use. If the functions of the remote control become erratic, replace the batteries. See below for more information. Precautions for the safe use of batteries Observe the following precautions for the safe use of batteries. If they are used improperly their life will be shortened, they may burst or their contents may leak. Precaution • Remove the batteries from the remote control if it is not going to be used for a long period of time. • Remove dead batteries and dispose of them properly. • Never leave dead batteries lying around, take them apart, mix them with other refuse, or throw them into an incinerator. • Never touch liquid that has leaked out of a battery. • Do not mix new and old batteries, or batteries of different types, when replacing them. 15 EN12-16.XV-M565BK[U....]/3 15 7/4/00, 3:44 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521 -013A Getting started English To use the remote control unit for TV operation Français You can operate your TV from the remote control unit. Setting the remote control signal for operating your TV. 1 Holding down TV/VIDEO - THEATER POSITION, enter the manufacturer code of your TV listed below by using the numeric buttons (0 - 9). Do not release TV/VIDEO - THEATER POSITION. Keep holding it until the next step is completed. Manufacturer code list Manufacturer No. Manufacturer 01 JVC 15 FERGUSON TV CHOICE DISC 1 DISC 2 DISC 3 SUBTITLE AUDIO 02 PANASONIC 16 PHILIPS/TCL/CHANGHONG 03 SONY 17 GRUNDIG 04 SHARP 18 ITT 05 TOSHIBA/BEIJING/CHANGHONG 19 MIVER 06 MITSUBISHI/CHANGHONG 20 FINLUX 07 HITACHI 21 NOKIA 08 SANYO 22 NEC DIGEST STROBE 3 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 9 TV 7 TV 8 TV 9 10 0 +10 TV -/-- TV 0 AMP VOL CANCEL RCH B.SEA FUNAI 23 JINXING/PEONY 10 AIWA 24 PEONY 11 DAEWOO 25 PEONY/CHANGHONG SAMSUNG 26 13 LG (GOLDSTAR) 27 PEIJIN/NOBLEX 14 THOMSON 28 TCL 3D PHONIC THEATER POSITION F.SEA RCH STOP F.SKIP ENTE R TV/VIDEO THEATER POSITION RVE MENU TITLE UP KONKA Numeric buttons RESE E KARAOK LEFT 12 TV/VIDEO PLAY PAUSE STOP - TV ch TV VOL PLAY MODE RETURN SHIFT DVD TV TIME 2 TV 2 B.SKIP 09 ZOOM 1 TV 1 SLOW SHIFT DVD DISPLAY ANGLE CURSOR RIGHT DOWN Getting started No. REMOTE CONTROL Example: To enter the manufacturer code “01”: Press “0” then “1.” 2 Press STOP while holding down TV/VIDEO - THEATER POSITION. 3 Try to operate your TV by pressing DVD - TV while holding SHIFT. If your TV turns on or off, you have successfully set the control signal. The following buttons can be used for operating the TV: TV DVD Turns the TV on or off. SHIFT TV ch Changes the TV channels. TV VOL Adjusts the TV volume. Selects the TV channels. *For some TVs, pressing “10” while holding down SHIFT functions as the “-/--.” “+10” functions as the ENTER button if your TV requires pressing the ENTER button after selecting a channel number. SHIFT to 10 1 TV -/-- TV 1 +10 0 TV 0 TV/VIDEO Switches input mode (either TV or VIDEO). THEATER POSITION NOTES • The remote control unit is initially set for operating a JVC TV. • If there is more than one code listed for the manufacturer of your TV, try them one by one until you succeed. To control the volume of a JVC’s amplifier or receiver You can control the volume of a JVC’s amplifier or receiver by using the AMP VOL button on the remote control unit. AMP VOL 16 EN12-16.XV-M565BK[U....]/3 16 7/4/00, 3:44 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521 -013A Basic operations Basic operations In the following description, the buttons on the remote control unit are mainly used, however, you may use the corresponding buttons on the front panel of the unit if available. Turning on/off the unit Press on the front panel or press DVD - TV on the remote control unit. TV CHOICE DISC 1 DVD PLAYER DISC 2 DISC 3 SUBTITLE AUDIO STANDBY DVD MIC1 MIC2 DVD 2 2 DVD 1 1 STOP PAUSE MIN MAX MIN RESUME THEATER DVD EACH MIC2 DOLBY D I G I T A L PLAY KARAOKE ON/OFF RESERVE MAX DISC TITLE CHAP MIC1 DISPLAY ZOOM TIME 3 3 DIGEST STANDBY/ON DVD ANGLE SKIP STROBE 1 2 3 TV 1 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 TV 7 TV 8 TV 9 0 +10 10 TV -/-- TV 0 DVD TV 9 CANCEL DVD / SUPER VIDEO CD / VIDEO CD / CD AMP VOL SLOW TV ch TV VOL TV/VIDEO PLAY MODE RETURN CANCEL SHIFT RCH B.SEA 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP STOP PAUSE R RESE E KARAOK RVE MENU TITLE • You can turn on the unit by pressing the PLAY button or any one of the DISC (1 through 3) buttons. In this operation, the unit starts playback if the disc is set in the selected tray. • You can turn on the unit by pressing any one of the 0 (OPEN/CLOSE) buttons on the front panel. F.SKIP ENTE UP LEFT CURSOR RIGHT DOWN REMOTE CONTROL Basic operations NOTE Even if you press the or DVD - TV button to turn off the unit, the unit is not disconnected from the AC power source as long as it is connected to the wall outlet. This state is called the standby mode. In this state, the unit consumes a very small amount of power. Inserting and removing discs 1 Press 0 (OPEN/CLOSE) located on the right of the disc tray you want to open. The corresponding disc tray opens. 2 Place the disc in the tray. With the label side up SHU TTLE 3 5 2 4 3 se pau D DV 2 1 1 play 6 0 0 +1 10 9 8 7 stop ER AY PL DVD 3 skip DVD 2 ER DIMM CUE RES P STA NDB E CHA Y TITL E DISC DVD H EAC ERV RES ER / SUP Y/ON CEL NDB STA CAN 2 MIC DVD 1 MIC Y L DOLB A MAX D MIN MAX DVD I G 1 • To insert an 8-cm disc, place it in the inner recess. I T 2 MIC MIN 1 MIC 3 Press 0 (OPEN/CLOSE) to close the disc tray. • If you press 0 (OPEN/CLOSE) for the disc being played, the unit stops playback and opens the tray. • You can insert or remove the disc by pressing 0 (OPEN/CLOSE) for a disc tray which is not in use for playback while a disc in the other tray is being played, without interrupting playback. NOTES • The unit can playback DVD VIDEO, Audio CD, SVCD and Video CD discs only. Do not load other disc types. For details about playable disc types, see page 11. • When loading a disc in the tray, be sure to position the disc inside the recess. Otherwise, the disc may be damaged when the tray is closed, or the disc may not be removed from the unit. 17 EN17-20.XV-M565BK[U....]/3 17 7/4/00, 3:46 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521 -013A Basic operations English Basic playback Français Now you can play a disc. First, let’s enjoy simple playback according to following procedure. To start playback Press PLAY, or press one of the DISC (1 through 3) buttons. TV CHOICE DISC 1 DISC 2 DISC 3 SUBTITLE AUDIO DIGEST The unit starts playback from: • the selected disc indicated in the display window when pressing PLAY or • the corresponding disc when pressing a DISC button. DVD DISPLAY ANGLE STROBE ZOOM TIME 1 2 3 TV 1 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 9 TV 7 TV 8 TV 9 10 0 +10 TV -/-- TV 0 AMP VOL SLOW TV ch TV VOL TV/VIDEO PLAY MODE RETURN CANCEL SHIFT RCH B.SEA The indicator on the DISC button (1 - 3) on the front panel corresponding to the disc being played flashes. 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP STOP PAUSE F.SKIP ENTE R RESE E KARAOK RVE MENU TITLE UP In both cases above, the unit basically plays back all discs in the trays once continuously in the following sequence and then stops. DISC2 CURSOR RIGHT DOWN REMOTE CONTROL DISC3 • The unit changes the playback disc when the current disc finishes and stops playback. Therefore, if the current disc is a DVD VIDEO disc or a Video CD disc with PBC function, it may not finish playback and the unit may not change the disc and playback the next disc. Basic operations DISC1 LEFT Basic control buttons NOTES • The 1 through 3 buttons on the front panel function the same as the DISC 1 through 3 buttons on the remote control unit respectively. • When the resume point is memorized, pressing PLAY starts playback from that point instead of the beginning. See page 20. • During playback, the display window shows the disc number and the title/chapter or track number being played. • With Video CD or SVCD discs with PBC control or some DVD discs, the menu display may appear on the TV screen after starting playback. In such a case, select an item to be played back from the menu. For operation using a menu, see page 21. • With some DVD discs, the unit starts playback automatically after inserting the disc. To stop playback completely Press STOP. The unit stops playback. To stop playback temporarily Press PAUSE. The unit pauses playback. To continue playback, press PLAY. 18 EN17-20.XV-M565BK[U....]/3 18 7/4/00, 3:46 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521 -013A Basic operations To advance or reverse playback rapidly while monitoring 7 During playback From the remote control unit Hold down 4 or ¢. Holding down ¢ advances playback rapidly, while holding down 4 reverses playback at 5 times the normal speed. Releasing the button returns the unit to normal playback. or Press 4 or ¢ while holding down SHIFT. Each press of 4 or ¢ while holding down the SHIFT button increases the playback speed from 2x to 60x the normal speed. Pressing PLAY returns the unit to normal playback. From the front panel SHUTTLE knob Use the SHUTTLE knob. SHUTTLE Basic operations To advance playback rapidly, turn the shuttle knob to the right and hold, and to reverse play rapidly, turn the shuttle knob to the left and hold. By releasing the shuttle knob, the unit returns to normal playback. The playback speed changes according to the amount you turn the shuttle knob. 3 2 1 STOP PAUSE DISC TITLE CHAP RESUME THEATER DVD EACH KARAOKE ON/OFF PLAY 1 2 3 4 5 6 7 8 9 10 0 SKIP +10 DVD / SUPER VIDEO CD / VIDEO CD / CD Holding down the 4 or ¢ button on the front panel also advances or reverses playback rapidly. To locate the beginning of the scene or song 7 During playback Press 4 or ¢. Press 4 to locate the beginning of the current chapter, title, or track, and press ¢ to locate the beginning of the next chapter, title, or track. NOTE • When you play a Video CD or SVCD disc with the PBC function or a DVD VIDEO disc, the unit may locate a different place, but it will generally locate the beginning of the title, chapter or track. 19 EN17-20.XV-M565BK[U....]/3 19 7/4/00, 3:46 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521 -013A Basic operations English Resuming playback Français The unit can memorize the position on a disc where you interrupt playback, and resume playback from that position next time you press PLAY. To memorize the interrupted position 1 Set the RESUME setting on the SYSTEM page of the preference display to ON. (See page 46 for details about how to set.) 2 At the position you want to interrupt playback, press STOP, or press DVD control or on the front panel. - TV on the remote The unit memorizes the interrupted position, while [RESUME] lights in the display window. If you interrupt playback by pressing STOP in step 2 above and then turn off the power, the memory is not cleared. To resume playback 7 While the disc you interrupt playback last time is still in the disc tray Basic operations Press PLAY. The unit starts playback from the position where you interrupted playback last time. ¶ To clear the resume position memory Carry out one of the following: * Take out the disc from the tray. * Press a DISC (1 - 3) button. * Press STOP while stopped. * Turn on the unit by pressing DVD - TV (on the remote control) or (on the front panel). NOTES • If you want to resume playback, do not press a DISC (1 - 3) button to start playback or do not press the or DVD - TV (on the remote control) to turn on the unit. (on the front panel) • The resume function does not work with Audio CD discs. • The resume function does not work if RESUME on the SYSTEM page of the preference display is set to OFF. • In the case of a Video CD/SVCD disc with PBC function, the unit may resume playback from a point slightly earlier than the resume point you stored. • The resume function does not work in the program or random mode. 20 EN17-20.XV-M565BK[U....]/f 20 7/13/00, 4:08 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A Advanced operations Advanced operations When you use the functions described below while stopped, make sure that the desired disc number is selected (the selected disc number is shown in the display window). If it is not selected, press the corresponding DISC button to start playback and then press STOP. Playing from a specific position on a disc You can play a disc from the selected track, title or chapter, or from the specified time. To locate a desired scene from the DVD menu DVD VIDEO discs generally have their own menus which show the disc contents. These menus contain various items such as titles of a movie, names of songs, or artist information, and display them on the TV screen. You can locate a desired scene by using the 0 0 0 menu. TV -/-- • When step 1: appears on the TV screen by pressing TITLE in The disc does not have a menu listing the titles. • When appears on the TV screen by pressing MENU in step 1: The disc does not have a menu • The menu button does not work while stopped. To locate a desired scene from the menu of the Video CD/SVCD with PBC Some Video CD/SVCD discs supports the PBC function. PBC is an abbreviation of “PlayBack Control.” A Video CD/SVCD disc recorded with PBC has its own menus, such as a list of the songs of the disc. You can locate a specific scene by using the menu. AMP VOL CANCEL SHIFT RCH B.SEA TV/VIDEO 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP STOP PAUSE F.SKIP 1 RVE MENU UP LEFT CURSOR RIGHT DOWN STROBE ZOOM TIME 1 2 3 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 9 TV 7 TV 8 TV 9 10 0 +10 TV -/-- TV 0 AMP VOL 2 CANCEL SHIFT RCH B.SEA TV/VIDEO 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP F.SKIP STOP PAUSE 2 TV ch TV VOL ENTE R RESE E KARAOK RVE MENU TITLE Advanced operations DVD DISPLAY ANGLE PLAY MODE RETURN RESE E TITLE DISC 3 TV 1 SLOW ENTE R KARAOK DISC 2 DIGEST TV ch TV VOL PLAY MODE RETURN TV CHOICE DISC 1 SUBTITLE AUDIO TV 0 SLOW 1 NOTES UP LEFT CURSOR RIGHT REMOTE CONTROL DOWN REMOTE CONTROL 7 Whenever a DVD VIDEO disc is loaded 1 Press MENU or TITLE. The menu appears on the TV screen. 7 When a Video CD/SVCD disc with PBC is stopped 1 A disc menu appears on the TV screen (The PBC function is activated). About menu Normally, a DVD VIDEO disc which contains more than one title may have a “title” menu which lists the titles. In this case, the menu appears on the TV screen by pressing the TITLE button. Some DVD VIDEO discs may also have a different menu which appears by pressing the MENU button. Example See the instructions of each DVD VIDEO disc for its particular menu. 2 Use CURSOR 2/3/5/∞ to select a desired item, then press ENTER. The unit starts playback of the selected item. Press PLAY or the corresponding DISC (1 - 3) button. Example: “Pbc” is indicated in the display window on the front panel. 2 Use the numeric buttons to select the desired number of the item. • See page 10 for details about how to use the numeric buttons. The unit starts playback from the selected item. You can return to the menu by pressing RETURN 3D PHONIC. With some discs, you can also select items by entering the corresponding number using the numeric buttons, which may cause the unit to automatically start playback. 21 EN21-35.XV-M565BK[U....]/3 21 7/4/00, 3:48 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A Advanced operations When “NEXT” or “PREVIOUS” appears on the TV screen, the unit generally works as follows: • Pressing ¢ advances to the next page. • Pressing 4 returns to the previous page. * The method of the operation is different depending on the disc. NOTES English • During DVD VIDEO playback, if a menu is shown on the TV screen, the numeric buttons may be used for selecting an item in the menu. • When Français appears on the TV screen. The title or track you have specified is not contained in the disc. • This function does not work during Video CD/SVCD playback with PBC function • To activate the PBC function when a PBC-compatible Video CD/SVCD disc is being played back without the PBC function, press STOP then press PLAY. • You can also activate the PBC function using the play mode menu display as follows. 1. Press PLAY MODE - CANCEL. 2. Use the CURSOR 2/3 to move press ENTER. to [PBC CALL], then • If you want to playback a PBC-compatible Video CD/SVCD disc without activating the PBC function, start playback by using the numeric buttons instead of the PLAY button. See the next paragraph. • When the KARAOKE function is active, you can specify a title in a DVD Video disc using the numeric buttons even during playback. (See page 36.) To locate a desired selection using 4 or ¢ TV CHOICE DISC 1 DISC 2 DISC 3 SUBTITLE AUDIO DIGEST To locate a desired selection using the numeric buttons DVD DISPLAY ANGLE STROBE ZOOM TIME 1 2 3 TV 1 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 TV 7 TV 8 TV 9 10 0 +10 TV -/-- TV 0 AMP VOL SLOW 9 TV ch TV VOL TV/VIDEO PLAY MODE RETURN CANCEL SHIFT TV DISC 2 DISC 3 RCH DVD B.SEA DIGEST STROBE ZOOM 2 3 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 9 TV 7 TV 8 TV 9 10 0 +10 TV -/-- TV 0 AMP VOL CANCEL RCH B.SEA ENTE R RESE E KARAOK RVE MENU TITLE UP LEFT CURSOR RIGHT DOWN REMOTE CONTROL UP LEFT CURSOR RIGHT DOWN REMOTE CONTROL 7 For DVD VIDEO: During playback For Audio CD: During playback For Video CD/SVCD: During playback without PBC function 1 You can play a desired title or chapter (DVD VIDEO) or track (Audio CD/Video CD/SVCD) by specifying the number. 7 For DVD VIDEO/Audio CD: During playback or while stopped For Video CD/SVCD: During playback without PBC function or while stopped 1 R RVE F.SKIP STOP PAUSE 1 ENTE MENU TITLE 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP 1 TV/VIDEO PLAY MODE RETURN SHIFT F.SKIP RESE E KARAOK TV ch TV VOL STOP PAUSE TIME 1 TV 1 SLOW 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP DISPLAY ANGLE Use the numeric buttons to specify the number. * During DVD VIDEO playback (except when a menu is shown), a chapter is specified. * While a DVD VIDEO is stopped, a title is specified. * For an Audio CD, Video CD or SVCD, a track is specified. Advanced operations CHOICE DISC 1 SUBTITLE AUDIO Press 4 or ¢. With an Audio CD, Video CD or SVCD, pressing the button skips a track. With a DVD VIDEO disc, pressing the button skips a chapter or title depending on the disc configuration. The selection number appears in the display window on the front panel. • To skip forward a selection, press ¢ once or repeatedly until the desired selection number appears in the display. • To skip to the beginning of the current selection, press 4 once. • To skip back a selection, press 4 repeatedly until the desired selection number appears in the display. NOTES The unit starts playback from the beginning of the selection. • See page 10 for details about how to use the numeric buttons. • This function may not work with some DVD VIDEO discs. • This function does not work during Video CD/SVCD playback with PBC function 22 EN21-35.XV-M565BK[U....]/3 22 7/4/00, 3:48 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A Advanced operations To locate a desired scene by specifying the chapter number [CHAP. SEARCH] NOTES • You can also locate a desired chapter directly by specifying the chapter number using the numeric buttons during playback (except a menu is shown). See page 22. • When the chapter number is incorrect in step 3: If the current title of a DVD VIDEO disc being played is divided into chapters, you can skip to a desired chapter by specifying the chapter number using the on-screen display. Overwrite the incorrect number with the correct number. • When is displayed in the TV screen in step 4: The chapter you have selected is not contained in the disc, or chapter search does not work on the disc. • To turn off the play mode menu: TV CHOICE DISC 1 DISC 2 DISC 3 SUBTITLE AUDIO DIGEST DVD DISPLAY ZOOM TIME 1 2 3 TV 1 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 TV 7 TV 8 TV 9 0 +10 10 TV -/-- TV 0 AMP VOL SLOW 1 CANCEL TV/VIDEO 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP STOP PAUSE To locate a desired position in the current title or track [TIME SEARCH] TV ch TV VOL H RC B.SEA 3 9 PLAY MODE RETURN SHIFT Press PLAY MODE. ANGLE STROBE F.SKIP ENTE R 2, 4 RESE E KARAOK RVE You can play a disc from the desired position by specifying the elapsed time from the beginning of the current title or track using the TIME SEARCH function. Note that some DVD VIDEO discs do not contain time information, and the TIME SEARCH function cannot be used. MENU TITLE UP LEFT CURSOR RIGHT DOWN 2 REMOTE CONTROL 7 During DVD VIDEO playback TV CHOICE DISC 1 DISC 2 DISC 3 SUBTITLE AUDIO 1 Press PLAY MODE - CANCEL. DIGEST Advanced operations The DVD play mode menu appears on the TV screen. STROBE Use CURSOR 2/3 to move SEARCH], then press ENTER. “GO TO CHAPTER = ” appears under the menu. ZOOM 2 3 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 9 TV 7 TV 8 TV 9 10 0 +10 TV -/-- TV 0 AMP VOL 1 CANCEL SHIFT RCH B.SEA TV/VIDEO 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP STOP PAUSE F.SKIP ENTE 2, 4 R RESE E KARAOK RVE MENU TITLE DVD CONTROL 3 TV ch TV VOL PLAY MODE RETURN to [CHAP. REPEAT A-B REPEAT TIME SEARCH TIME 1 TV 1 SLOW 2 DVD DISPLAY ANGLE UP CHAP. SEARCH LEFT CURSOR RIGHT DOWN GO TO CHAPTER = 2 REMOTE CONTROL 3 Use the numeric buttons (0 ~ 9) to enter the desired chapter number. Example: To select chapter number 8: Press “8” → ENTER. To select chapter number 37: Press “3” → “7” → ENTER. 4 Press ENTER. The unit starts playback from the selected chapter. 7 For DVD VIDEO: During playback For Audio CD: During playback For Video CD/SVCD: During playback without PBC function 1 Press PLAY MODE - CANCEL. The play mode menu appears on the TV screen. 2 Use CURSOR 2/3 to move SEARCH], then press ENTER. to [TIME “GO TO” appears under the menu. The “10” and “+10” buttons are not used in this function. 3 Use the numeric buttons (0 ~ 9) to enter the time. You can specify the elapsed time of the current title or track to set the location which you want to playback from. 23 EN21-35.XV-M565BK[U....]/3 23 7/4/00, 3:48 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A Advanced operations 4 Press ENTER. The unit starts playback from the specified time. (for DVD VIDEO) English Français (for Audio CD) CD CONTROL DVD CONTROL REPEAT A-B REPEAT TIME SEARCH GO TO To locate a desired scene from the digest display [DIGEST] REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH GO TO 2:34:00 02:34 The unit can display the opening scene of each title or chapter on a DVD VIDEO or each track of a Video CD/ SVCD. You can select a desired scene from those displayed on the TV screen. TV CHOICE DISC 1 Selected time 1 Selected time (for Video CD/SVCD) VCD CONTROL • “10” and “+10” buttons are not used in this function. • You can specify the time in hour/minute/second format for DVD VIDEO discs, and in minute/second format for Audio CD, Video CD and SVCD discs. DISC 2 REPEAT A-B REPEAT TIME SEARCH PBC CALL DIGEST DVD DISPLAY ANGLE STROBE ZOOM TIME 1 2 3 TV 1 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 9 TV 7 TV 8 TV 9 10 0 +10 TV -/-- TV 0 AMP VOL SLOW GO TO DISC 3 SUBTITLE AUDIO TV ch TV VOL TV/VIDEO PLAY MODE RETURN 02:34 CANCEL SHIFT RCH B.SEA 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP STOP PAUSE R RESE E KARAOK RVE MENU TITLE 2 Selected time • Example (for DVD VIDEO): To playback from 2(H):34(M):00(S) F.SKIP ENTE 3 UP LEFT CURSOR RIGHT DOWN REMOTE CONTROL GO TO _ : _ _ : _ _ GO TO 2 : _ _ : _ _ → Press “3”. GO TO 2 : 3 _ : _ _ 7 For DVD VIDEO: While stopped or during playback For Video CD/SVCD: While stopped or during playback without PBC function. 1 → Press “4”. Press SUBTITLE - DIGEST while holding down SHIFT. Up to nine opening scenes are displayed. GO TO 2 : 3 4 : _ _ → • While a DVD VIDEO disc is stopped: The opening scene of each title appears on the TV screen. • During DVD VIDEO disc playback: The opening scene of each chapter in the current title appears on the TV screen. • When a Video CD/SVCD disc is loaded: The opening scene of each track appears on the TV screen . Press ENTER. You do not have to press “0” to enter the trailing zeros (for the last two digits in the example above). Of course, it is possible to enter them. • When you make a mistake Move the cursor to the incorrect value, then press the correct button to re-select the value. Advanced operations → Press “2”. GO TO 2 : 3 5 : _ _ → Press CURSOR 2. GO TO 2 : 3 _ : _ _ → Press “4”. GO TO 2 : 3 4 : _ _ NOTES • When appears on the TV screen in step 2: The time you have selected is not contained on the disc, or the time search function does not work on the disc. Also note that the time search function does not work during Video CD/SVCD playback with the PBC function. 2 Use CURSOR 2/3/5/∞ to select the desired scene. The selected scene is indicated by . If there are more than 9 scenes, the digest screen will have more than one page. In this case, pressing ¢ advances to the next page, while pressing 4 returns to the previous page. • To turn off the play mode menu: Press PLAY MODE. • The TIME SEARCH function cannot be used during program playback. 24 EN21-35.XV-M565BK[U....]/3 24 7/4/00, 3:49 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A Advanced operations Special picture playback The unit provides special picture playback functions including Frame-by-frame, Strobe, Slow-motion and Zoom. Selected scene • When the lower right scene is selected, pressing CURSOR 3 advances to the next page if available. Similarly, when the upper left scene is selected, pressing CURSOR 2 returns to the previous page (if available). • When there are more than one digest page, after pressing SUBTITLE - DIGEST while holding down SHIFT, pressing ¢ before all 9 scenes of the first page appear on the TV screen will advance to the next page. Similarly, pressing 4 before all the scenes of the second or latter page appear on the TV screen will return to the previous page. 3 To advance a still picture frame-by-frame CANCEL RCH B.SEA 1 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP F.SKIP STOP PAUSE ENTE R RESE E KARAOK RVE MENU TITLE UP LEFT RIGHT CURSOR DOWN REMOTE CONTROL 7 While paused (still) 1 Press ENTER. TV/VIDEO PLAY MODE RETURN SHIFT The unit starts playback from the selected scene. Press PAUSE. Each time you press PAUSE, the still picture advances to the next frame. NOTE Pressing PLAY returns to the normal playback mode. With some discs, depending on the contents, it may take some time until all the scenes appear on the screen. To display still pictures [STROBE] TV CHOICE DISC 1 DISC 2 DISC 3 SUBTITLE AUDIO Advanced operations 2 DIGEST DVD DISPLAY ANGLE STROBE ZOOM TIME 1 2 3 TV 1 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 9 TV 7 TV 8 TV 9 10 0 +10 TV -/-- TV 0 AMP VOL SLOW TV ch TV VOL TV/VIDEO PLAY MODE RETURN CANCEL SHIFT RCH B.SEA 1 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP STOP PAUSE F.SKIP ENTE R RESE E KARAOK RVE MENU TITLE UP LEFT CURSOR RIGHT DOWN REMOTE CONTROL 7 During playback 1 At the point you want to view as continuous photographs, press PAUSE. The unit pauses playback. 2 Press AUDIO - STROBE while holding down SHIFT. Nine continuous still pictures appear on the TV screen. • Pressing PAUSE when the nine still pictures appear will advance to the next nine still pictures. 25 EN21-35.XV-M565BK[U....]/3 25 7/4/00, 3:49 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A Advanced operations • To cancel strobe play Press AUDIO - STROBE while holding down SHIFT. English To zoom a scene [ZOOM] Français NOTES • Pressing and holding PAUSE for more than 1 second also activates the Strobe function. TV CHOICE DISC 1 DISC 2 DISC 3 SUBTITLE AUDIO DIGEST • If you press AUDIO - STROBE while holding down SHIFT during playback, nine still pictures also appear but they advance in realtime. 1 DVD DISPLAY ANGLE STROBE ZOOM TIME 1 2 3 TV 1 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 TV 7 TV 8 TV 9 10 0 +10 TV -/-- TV 0 AMP VOL SLOW 9 TV ch TV VOL TV/VIDEO PLAY MODE RETURN CANCEL SHIFT To playback in slow-motion [SLOW] RCH B.SEA 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP STOP PAUSE R RESE E KARAOK RVE MENU TITLE 7 During playback F.SKIP ENTE UP LEFT CURSOR RIGHT DOWN 2 From the remote control unit REMOTE CONTROL 1 TV 4 TV 5 TV 6 7 8 9 TV 7 TV 8 TV 9 10 0 +10 TV -/-- TV 0 AMP VOL SLOW CANCEL SHIFT TV/VIDEO PLAY B.SKIP F.SKIP STOP PAUSE 1 3D PHONIC THEATER POSITION F.SEA RCH CH B.SEAR 7 During playback or while paused TV ch TV VOL PLAY MODE RETURN ENTE R RESE KE RVE KARAO MENU TITLE “ZOOM” appears on the TV screen. UP LEFT Press ANGLE - ZOOM while holding down SHIFT. CURSOR RIGHT The unit zooms in to the center part of the scene to produce a double-sized picture. DOWN REMOTE CONTROL 1 Press SLOW. Advanced operations To play forward slow-motion, press SLOW “+“, and to play reverse slow-motion (for DVD VIDEO discs only), press SLOW “–“. First, the unit plays the slowest speed, and each time you press the button, the playback speed increases. ZOOM From the front panel SHUTTLE 3 2 1 STOP PAUSE DISC TITLE CHAP RESUME THEATER PLAY KARAOKE ON/OFF 1 2 3 4 5 6 7 8 9 10 0 DVD EACH SKIP +10 1 DVD / SUPER VIDEO CD / VIDEO CD / CD 1 2 Use CURSOR 2/3/5/∞ to move the zoomed-in scene. Press PAUSE, then use the SHUTTLE knob. ZOOM To play forward slow-motion, turn the SHUTTLE knob to the right. To play reverse slow-motion (for DVD VIDEO discs only), turn it to the left. The more you turn the knob, the more the slowmotion speed increases. • To return to normal playback Press PLAY. • To pause slow-motion playback Press PAUSE. • To return to normal playback Press ANGLE - ZOOM while holding down SHIFT. NOTE While Zoomed, the picture may look coarse. NOTES • The sound is muted during slow-motion playback. • Reverse slow-motion playback is not possible for a Video CD and SVCD discs. EN21-35.XV-M565BK[U....]/3 26 26 7/4/00, 3:49 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A Advanced operations Changing the playback order You can play titles or tracks on discs inserted in the desired order or in random order. 1 3-3 7 2 2 - 20 8 3 3-1 9 4 1 - 15 10 5 6 11 12 13 14 15 16 17 18 The programmed disc number and title/track number are shown under each program number. To playback in the desired order [PROGRAM] You can play titles or tracks on discs inserted in the desired order by using the Program function. DISC 2 DISC 3 SUBTITLE AUDIO DIGEST DVD DISPLAY ANGLE STROBE ZOOM TIME 1 2 3 TV 1 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 TV 7 TV 8 TV 9 10 0 +10 TV -/-- TV 0 AMP VOL SLOW TV ch TV/VIDEO PLAY MODE RETURN 1 CANCEL SHIFT RCH B.SEA STOP PAUSE 4 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP 3 9 TV VOL F.SKIP ENTE R RESE E KARAOK RVE MENU TITLE UP LEFT CURSOR RIGHT DOWN 2 REMOTE CONTROL Advanced operations Press PLAY MODE - CANCEL. The play mode menu appears on the TV screen. 2 Use CURSOR 2/3 to move to [PROGRAM] and press ENTER. REPEAT PROGRAM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 The “PROGRAM” indicator appears in the display window on the front panel. Specify the disc using the DISC (1 - 3) buttons and then the title or track using the numeric buttons. See page 10 for details about how to use the numeric buttons. Up to 18 titles or tracks can be programmed. You may select the same title or track more than once. 27 NOTES • Some DVD VIDEO discs may not be played back correctly in program mode. • During program playback, pressing ¢ skip to the next selection of the program. Pressing 4 returns to the beginning of the current selection, however, you cannot skip back to the previous selection. • By pressing PLAY MODE - CANCEL during program playback, the program table is displayed on the TV screen and the current program number is indicated in yellow. • To quit program playback Press STOP while stopped. The “PROGRAM” indicator in the display window turns off. Note that the program remains. To clear the program, press STOP while the program table is shown on the TV screen. RANDOM The program table appears under the menu bar (as shown above). 3 Press PLAY to start program play. • In the program mode, the DISC (1 - 3) and numeric buttons are only used for specifying program selections. 7 While stopped 1 4 When all of the programmed titles/tracks have finished playback, the unit stops but the program remains. TV CHOICE DISC 1 • When you specify a wrong selection Press PLAY MODE - CANCEL while holding down the SHIFT (or press CANCEL on the front panel). The last selection is erased. • To clear the program Press STOP. While stopped and the play mode menu is displayed on the TV screen, by moving to [PROGRAM] and pressing ENTER, the program mode quits. Note that the program remains. XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A Advanced operations To playback in random order [RANDOM] English Repeat playback Français You can play titles or tracks on discs inserted in random order by using the Random function. 10 0 TV -/-- +10 TV 0 AMP VOL SLOW TV VOL CANCEL SHIFT RCH B.SEA 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP F.SKIP STOP PAUSE To repeat the current selection or all disc contents [REPEAT] TV ch TV/VIDEO PLAY MODE RETURN 1 You can repeat playback of the current selection or all discs inserted. You can also repeat playback of a desired part. 3 ENTE R RESE E KARAOK RVE MENU TITLE UP LEFT CURSOR RIGHT DOWN 2 DISC 2 DIGEST DISC 3 7 While stopped STROBE ZOOM 2 3 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 TV 7 TV 8 TV 9 10 0 +10 TV -/-- TV 0 AMP VOL 9 1 CANCEL SHIFT RCH B.SEA TV/VIDEO 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP STOP PAUSE R RVE MENU TITLE to F.SKIP ENTE RESE E KARAOK Use CURSOR 2/3 to move [RANDOM]. TV ch TV VOL PLAY MODE RETURN The play mode menu appears on the TV screen. 2 TIME 1 SLOW Press PLAY MODE - CANCEL. DVD DISPLAY ANGLE TV 1 REMOTE CONTROL 1 TV CHOICE DISC 1 SUBTITLE AUDIO UP LEFT CURSOR RIGHT DOWN 2 REMOTE CONTROL REPEAT PROGRAM RANDOM 7 In any condition except Video CD/SVCD playback 1 3 Press PLAY MODE - CANCEL. The play mode menu appears on the TV screen. Press ENTER. The unit starts random playback of the selected disc. The “RANDOM” indicator appears in the display window on the front panel. When all titles/tracks of the disc have been played once, the unit starts random playback of the next disc (if inserted). After playing all titles/tracks of the second disc, the unit starts random playback of the third disc (if inserted). After playing all titles/tracks of all the discs, random playback ends. The same title or track will not be played back more than once during random play. • To stop/quit random playback in the middle Press STOP to stop playback. The unit is still in random playback mode, so pressing PLAY starts random playback again. To quit random playback, press STOP again while stopped. The “RANDOM” indicator in the display window turns off. NOTE • Some DVD VIDEO discs may not be played back correctly in the random mode. 2 Use CURSOR 2/3 to move then press ENTER. Advanced operations with PBC to [REPEAT], Each time you press ENTER, the repeat mode changes as follows: • During DVD VIDEO playback DVD CONTROL REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH REPEAT ALL The selected repeat mode appears on the TV screen. REPEAT ALL (all disc repeat) * REPEAT TITLE (current title repeat) * REPEAT CHAPTER (current chapter repeat) No indication (off) * While stopped, you cannot select REPEAT TITLE or REPEAT CHAPTER. 28 EN21-35.XV-M565BK[U....]/f 28 7/13/00, 4:11 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A Advanced operations • During Audio CD/Video CD/SVCD playback To repeat a desired part [A-B REPEAT] (for Video CD/SVCD) (for Audio CD) VCD CONTROL CD CONTROL REPEAT A-B REPEAT TIME SEARCH REPEAT A-B REPEAT TIME SEARCH PBC CALL REPEAT ALL REPEAT ALL TV CHOICE DISC 1 DISC 2 DISC 3 SUBTITLE AUDIO DIGEST Selected repeat mode Selected repeat mode STROBE ZOOM TIME 1 2 3 TV 1 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 9 TV 7 TV 8 TV 9 10 0 +10 TV -/-- TV 0 AMP VOL SLOW TV ch TV VOL TV/VIDEO PLAY MODE RETURN 1 REPEAT ALL (all disc repeat) DVD DISPLAY ANGLE CANCEL SHIFT 3D PHONIC THEATER POSITION F.SEA RCH RCH B.SEA PLAY B.SKIP REPEAT 1 (current track repeat) F.SKIP STOP PAUSE 2, 3 ENTE R RESE E KARAOK RVE MENU TITLE UP LEFT No indication (off) CURSOR RIGHT DOWN 2 REMOTE CONTROL • To stop repeat playback Press STOP. 7 During playback • While stopped 1 REPEAT PROGRAM Press PLAY MODE - CANCEL. The play mode menu appears on the TV screen. RANDOM REPEAT ALL 2 REPEAT ALL Advanced operations No indication (off) • If you press STOP in REPEAT ALL mode, the unit stops playback but remains in the mode. • If you press STOP in REPEAT1, TITLE REPEAT or CHAPTER REPEAT mode, the unit stops playback and quits the mode. • To quit repeat playback With pointed at [REPEAT], press ENTER repeatedly until the mode is set to off. Use CURSOR 2/3 to move to [A-B REPEAT], then press ENTER at the beginning of the part you want to repeat (point A). Make sure that REPEAT mode is off. If any one of the REPEAT modes is selected, you cannot move to [A-B REPEAT]. 3 Press ENTER at the end of the part you want to repeat (point B). The unit locates “A” and starts repeat playback between “A” and “B.” (for DVD VIDEO) (for Audio CD) DVD CONTROL CD CONTROL REPEAT A-B REPEAT TIME SEARCH NOTES • Some DVD VIDEO discs do not allow the title repeat or/ and chapter repeat. A 0:00:16 CHAP. SEARCH REPEAT A-B REPEAT TIME SEARCH B 0:01:16 A 0:00:16 B 0:01:31 • Some DVD VIDEO discs automatically stops playback in the middle of the disc. • During the REPEAT ALL playback, if such a DVD disc stops playback in the middle, the next disc automatically starts playback. • During the REPEAT ALL playback, if the next disc is a Video CD/SVCD disc with PBC, the unit plays the disc without activating the PBC function. • Repeat playback function cannot be used during Video CD/SVCD playback with PBC function. Point A Point B Point A (for Video CD/SVCD) VCD CONTROL REPEAT A-B REPEAT TIME SEARCH A 0:00:16 B 0:01:31 • To turn off the play mode menu display Press PLAY MODE - CANCEL. Point A 29 EN21-35.XV-M565BK[U....]/3 29 7/4/00, 3:49 PM Point B PBC CALL Point B XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A Advanced operations • To quit A-B repeat playback Press STOP. The unit stops playback and quits the AB repeat mode. • During playback, pressing ENTER when is pointed at [AB REPEAT] quits the A-B repeat mode and continues playback. • You can also quit the A-B repeat mode by pressing 4 or ¢. NOTES • To turn off the play mode menu Selecting a scene angle of DVD VIDEO English Français You can enjoy a variety of scene angles if the DVD VIDEO disc contains “multi-angle” parts, where multiple cameras were used to shoot the same scene from different angles. At the beginning of “multi-angle” parts, screen. appears on the TV Press PLAY MODE - CANCEL. • If appears when pressing ENTER in step 2 during DVD VIDEO playback You cannot repeat the selected portion because of the disc contents. To select a scene angle from the normal screen [ANGLE] • The A-B REPEAT function cannot be used during program playback. TV CHOICE DISC 1 DISC 2 DISC 3 SUBTITLE AUDIO DIGEST DVD DISPLAY ANGLE STROBE ZOOM 2 3 TV 1 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 TV 7 TV 8 TV 9 0 +10 10 TV -/-- TV 0 AMP VOL SLOW 9 TV ch TV VOL TV/VIDEO PLAY MODE RETURN CANCEL SHIFT RCH B.SEA 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP F.SKIP STOP PAUSE 1 TIME 1 ENTE R RESE E KARAOK RVE MENU TITLE UP LEFT CURSOR RIGHT DOWN Advanced operations 2 REMOTE CONTROL 7 During DVD VIDEO playback 1 Press ANGLE - ZOOM. The Angle selectin display appears on the TV screen. 2 1/3 Press ANGLE - ZOOM or CURSOR 2/3 to select the desired angle. Each time you press ANGLE or CURSOR 2/3, the angle changes. Example: 1/3 2/3 3/3 NOTES • The Angle selection display will automatically disappear if you do not change the angle for 10 seconds. • To turn off the Angle selection display manually, press ENTER. • When appears on the TV screen The current scene is not recorded from multiple angles. 30 EN21-35.XV-M565BK[U....]/3 30 7/4/00, 3:49 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A Advanced operations To select a scene angle from the angle list display [ANGLE] TV CHOICE DISC 1 DISC 2 DISC 3 SUBTITLE AUDIO DIGEST DVD DISPLAY ANGLE STROBE ZOOM TIME 1 2 3 TV 1 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 TV 7 TV 8 TV 9 0 +10 10 TV -/-- TV 0 AMP VOL SLOW RCH B.SEA TV/VIDEO 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP STOP PAUSE F.SKIP ENTE R RESE OKE RVE KARA MENU TITLE 2 To select the subtitle language [SUBTITLE] TV ch TV VOL CANCEL For DVD VIDEO discs, you can select the subtitle language, as well as the audio language/sound included on a disc. For Video CD and SVCD discs, you can select the audio channel(s). 9 PLAY MODE RETURN SHIFT 1 Changing the language and sound 3 7 During playback UP LEFT CURSOR TV CHOICE DISC 1 DISC 2 1, 2 REMOTE CONTROL 7 During DVD VIDEO playback SUBTITLE AUDIO DIGEST STROBE Advanced operations TIME 2 3 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 9 TV 7 TV 8 TV 9 10 0 +10 TV -/-- TV 0 AMP VOL TV ch TV VOL TV/VIDEO PLAY MODE RETURN CANCEL RCH B.SEA Press and hold ANGLE - ZOOM for more than 1 second. 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP STOP PAUSE F.SKIP ENTE R RESE E KARAOK RVE MENU TITLE UP LEFT 3 CURSOR RIGHT DOWN REMOTE CONTROL The selected camera angle Use CURSOR 5/∞/2/3 to select the desired angle. 1 Press SUBTITLE - DIGEST. The Subtitle selection display appears on the TV screen. (DVD VIDEO) ON 3 ZOOM 1 SLOW Up to nine camera angles recorded on a disc appear on the TV screen. 2 DVD DISPLAY ANGLE TV 1 SHIFT 1 DISC 3 RIGHT DOWN 1/3 (SVCD) ENGLISH ON 1/4 Press ENTER. 7 The unit starts playback by the selected angle on the full-sized screen. NOTES • When 2 To turn the subtitle on and off, press SUBTITLE - DIGEST. 3 To select the desired subtitle language, press CURSOR 2/3. appears on the TV screen in step 1: The current scene is not recorded from multiple angles. • During the operation above, audio is muted. Each time you press CURSOR 2/3, the subtitle language changes. • For DVD Pressing CURSOR 2/3 cycles among the subtitles recorded on the disc. Example: 1/3 ENGLISH 2/3 FRENCH 3/3 SPANISH –/3 (off) 31 XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A Advanced operations (DVD VIDEO) • For SVCD Pressing CURSOR 2/3 cycles among the four subtitle channels as follows regardless of whether the subtitles are recorded or not. You can also select the subtitle by pressing SUBTITLE. (Video CD) English OFF -/4 1/3 ENGLISH STEREO Français 1/4 2/4 3/4 (SVCD) 4/4 STEREO-1 NOTES • For DVD VIDEO, the selected language may be abbreviated on the TV screen. See “Appendix A: Table of languages and their abbreviations” at the end of this manual. • To turn off the Subtitle selection display manually, press ENTER. • When appears on the TV screen: You cannot select the subtitle. 2 Press AUDIO - STROBE or CURSOR 2/3 to select the desired audio. • For DVD VIDEO Each time you press AUDIO - STROBE or CURSOR 2/3, the audio language or sound changes. To change the audio language or sound [AUDIO] By AUDIO selection, you can choose the audio language of movies or choose to enjoy karaoke with or without the vocal. 1/3 ENGLISH 2/3 FRENCH 3/3 SPANISH • For Video CD/SVCD Each time you press AUDIO - STROBE or CURSOR 2/ 3, the playback audio changes. Example: (For Video CD) (For SVCD) STEREO STEREO-1 L STEREO-2 TV CHOICE DISC 1 DISC 2 DISC 3 SUBTITLE AUDIO 1, 2 Example: DIGEST DVD DISPLAY ANGLE STROBE ZOOM TIME 1 2 3 TV 1 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 9 TV 7 TV 8 TV 9 10 0 +10 TV -/-- TV 0 AMP VOL SLOW CANCEL H RC B.SEA R-1 TV/VIDEO 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP STOP PAUSE L-1 R TV ch TV VOL PLAY MODE RETURN SHIFT Advanced operations • The Subtitle selection display will automatically disappear if you do not change the subtitle for 10 seconds. L-2 F.SKIP ENTE R RESE OKE R-2 RVE KARA MENU TITLE UP LEFT CURSOR RIGHT DOWN 2 REMOTE CONTROL 7 During playback 1 NOTES • For DVD VIDEO, the selected language may be abbreviated on the TV screen. See “Appendix A: Table of languages and their abbreviations” at the end of this manual. Press AUDIO - STROBE. • The Audio selection display will automatically disappear if you do not change the audio for 10 seconds. The Audio selection display appears on the TV screen. • To turn off the Audio selection display manually, press ENTER. • When appears on the TV screen (for a DVD VIDEO disc): You cannot select the audio. 32 EN21-35.XV-M565BK[U....]/3 32 7/4/00, 3:49 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A Advanced operations Selecting the picture character Enjoying virtual surround sound You can select the quality of the image from among four options (OFF, 1, 2 and 3) according to the type of programming, picture tone or personal preferences. Using the 3D Phonic function, you can get a simulated surround effect from your stereo system. To select the picture character [THEATER POSITION] To simulate surround sound [3D PHONIC] TV CHOICE DISC 1 DISC 2 DISC 3 SUBTITLE AUDIO TV CHOICE DISC 1 DISC 2 DISC 3 SUBTITLE AUDIO DIGEST STROBE ZOOM TIME 1 2 3 TV 1 TV 2 TV 3 DISPLAY ANGLE STROBE DIGEST DVD DVD DISPLAY ANGLE ZOOM TIME 4 5 6 TV 4 TV 5 TV 6 1 2 3 7 8 9 TV 1 TV 2 TV 3 TV 7 TV 8 TV 9 +10 4 5 6 10 0 TV 4 TV 5 TV 6 TV -/-- TV 0 7 8 TV 7 TV 8 TV 9 0 +10 10 TV -/-- TV 0 9 AMP VOL SLOW CANCEL SHIFT AMP VOL SLOW TV ch TV VOL RCH B.SEA H RC B.SEA 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP F.SKIP STOP PAUSE 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP CANCEL TV/VIDEO F.SKIP TV/VIDEO PLAY MODE RETURN SHIFT TV ch TV VOL PLAY MODE RETURN STOP PAUSE 1, 2 1,2 ENTE R RESE E KARAOK RVE MENU TITLE UP ENTE R LEFT RESE E KARAOK CURSOR RIGHT RVE MENU TITLE DOWN UP LEFT CURSOR RIGHT DOWN REMOTE CONTROL REMOTE CONTROL 7 During playback Advanced operations 7 During playback 1 1 Press TV/VIDEO - THEATER POSITION while holding down SHIFT. The theater position display appears on the TV screen. 2 Select the desired theater position by pressing TV/VIDEO - THEATER POSITION while holding down SHIFT. Press RETURN - 3D PHONIC while holding down SHIFT. The 3D Phonic display appears on the TV screen. 2 Select the desired mode by pressing RETURN - 3D PHONIC while holding down SHIFT. Each press changes the 3D phonic mode as follows: 3D PHONIC DRAMA Each press changes the option as follows. THEATER 1 Selected 3D phonic mode 3D PHONIC ACTION* Selected picture character 3D PHONIC DRAMA THEATER 1 THEATER 2 THEATER 3 “THEATER OFF” is the normal position. Selecting a higher number tones down the picture character. THEATER OFF NOTES • The theater position display will automatically disappear if you do not change the theater position for 5 seconds. • To turn off the theater position display manually, press ENTER. 3D PHONIC THEATER 3D PHONIC OFF • ACTION: Suitable for action movies and sports programs in which sounds dynamically move. • DRAMA: Natural and warm sound. You can enjoy movies in a relaxed mood. 33 EN21-35.XV-M565BK[U....]/3 33 7/4/00, 3:49 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A Advanced operations • THEATER: You can enjoy sound effects like in a major theater in Hollywood. * When you play a DVD VIDEO disc recorded in Dolby Digital which contains more than 3 channels, ACTION does not appear. English Checking the status Français You can check the disc/time information, as well as the DVD functions, of the disc. To check the disc/time information NOTES • The 3D Phonic display will automatically disappear if you do not change the 3D phonic for 5 seconds. TV CHOICE DISC 1 • To turn off the 3D phonic display manually, press ENTER. DISC 2 • With a Video CD or SVCD disc, when making the AUDIO setting to L or R (for a Video CD disc), or L-1, R-1, L-2 or R-2 (for an SVCD disc), you cannot use the 3D function (i.e. the 3D Phonic mode is fixed to OFF). DIGEST Conversely, when the 3D Phonic function is active, changing the AUDIO setting to L or R from STEREO cancels the 3D Phonic function. STROBE TIME 2 3 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 TV 7 TV 8 TV 9 0 +10 10 TV -/-- TV 0 AMP VOL TV ch TV VOL CANCEL SHIFT RCH B.SEA TV/VIDEO 3D PHONIC THEATER POSITION F.SEA RCH PLAY F.SKIP STOP PAUSE 1, 2 9 PLAY MODE RETURN • The 3D phonic function works correctly when playing back discs recorded in the Dolby Surround or Dolby Digital 5.1-CH format. ENTE R RESE E KARAOK RVE MENU TITLE UP LEFT It also works when playing back discs other than those above, but does not provide the correct effect. CURSOR RIGHT DOWN • The 3D Phonic function does not affect the DTS or Dolby Digital bitstream signal from the DIGITAL OUT jack. REMOTE CONTROL 7 During playback 1 Press DISPLAY - TIME once for a Audio CD or Video CD/SVCD disc, or twice for a DVD VIDEO disc. The disc/time display appears on the TV screen. You can directly access the disc/time display of a DVD VIDEO disc by pressing DISPLAY - TIME while holding down SHIFT . Advanced operations • When the 3D PHONIC function is active, the DOWN MIX and COMPRESSION settings in the AUDIO page of the preference display are disabled. ZOOM 1 SLOW 2 DVD DISPLAY ANGLE TV 1 B.SKIP • The sound effect will not be set or operate, even if 3D PHONIC is pressed, for the sound of DVD VIDEO discs recorded in Linear PCM. DISC 3 SUBTITLE AUDIO (for DVD VIDEO) DISC 3 TITLE 1 CHAP. 25 TIME 2:25:25 BITRATE 3.3 Mbps Transmission rate Time Current chapter number Current title number Disc number (for Audio CD, or Video CD/SVCD playing without PBC) DISC 3 TRACK 1 TIME 00:08 EACH Time Time mode Current track number Disc number (for Video CD/SVCD playing with PBC) DISC 3 TRACK 1 TIME 25:25 PBC Time PBC on status Current track number Disc number EN21-35.XV-M565BK[U....]/3 34 7/4/00, 3:49 PM 34 XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A Advanced operations 2 To change the time display mode (only for Audio CD or Video CD/SVCD without PBC), press DISPLAY - TIME while holding down SHIFT. To check the DVD function status 7 During DVD VIDEO playback The time display mode cycles as below. TV CHOICE DISC 1 (for Audio CD) DISC 2 DISC 3 SUBTITLE AUDIO EACH (current track elapsed time) DIGEST EACH REMAIN (current track remaining time) DVD DISPLAY ANGLE STROBE ZOOM TIME 1 2 3 TV 1 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 TV 7 TV 8 TV 9 10 0 +10 TV -/-- 9 TV 0 AMP VOL SLOW TV ch TV VOL TV/VIDEO PLAY MODE RETURN CANCEL SHIFT TOTAL (disc elapsed time) RCH B.SEA 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP STOP PAUSE F.SKIP ENTE R RESE E KARAOK RVE MENU TITLE TOTAL REMAIN (disc remaining time) 1 UP LEFT CURSOR RIGHT DOWN REMOTE CONTROL (for Video CD/SVCD without PBC) EACH (current track elapsed time) EACH REMAIN (current track remaining time) Advanced operations The selected time information is displayed on the TV screen, as well as in the front panel display window. 1 Press DISPLAY – TIME. The DVD function status display appears on the TV screen. 1/2 1/2 1/2 ENGLISH ENGLISH 7 While stopped You can check the total disc time and current (selected) track time of an Audio CD/Video CD/SVCD only from the front panel display window. 1 Press DISPLAY - TIME while holding down SHIFT. The current selections of the camera angle, audio language and subtitle language are displayed. • To turn off the DVD function status display Press DISPLAY-TIME twice. When EACH and REMAIN are indicated, the current (selected) track time appears. When only REMAIN is indicated, the total disc time appears. You can change the current (selected) track by pressing 4 or ¢. • To turn off the disc/time display Press DISPLAY-TIME. 35 EN21-35.XV-M565BK[U....]/f 35 7/13/00, 4:12 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A KARAOKE operation KARAOKE operation Connecting microphones Preparation Turning on the KARAOKE function SHUTTLE DVD PLAYER STANDBY STANDBY/ON MIC1 MIC2 DVD 3 DVD 2 DVD 1 3 2 1 STOP PAUSE MIN MAX MIN RESERVE MAX DISC TITLE CHAP MIC1 DVD EACH MIC2 (From the remote control unit) DOLBY D I G I T A L KARAOKE ON/OFF 1 2 3 4 5 6 7 8 9 10 0 SKIP +10 CANCEL DVD / SUPER VIDEO CD / VIDEO CD / CD TV CHOICE DISC 1 DISC 2 DISC 3 SUBTITLE AUDIO DIGEST DVD STROBE ZOOM TIME 1 2 3 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 9 TV 7 TV 8 TV 9 10 0 +10 TV -/-- 1 DISPLAY ANGLE TV 1 1 TV 0 AMP VOL SLOW CANCEL SHIFT RCH B.SEA TV/VIDEO 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP NOTES F.SKIP STOP PAUSE • While an Audio CD disc is selected (not only during playback but also while stopped), the input signals from the MIC 1/2 jacks are not output from the DIGITAL OUT jack. ENTE R RESE E KARAOK RVE MENU TITLE UP LEFT CURSOR Connect microphone(s) to the MIC 1/2 jack(s) on the front panel. TV ch TV VOL PLAY MODE RETURN 1 RESUME THEATER PLAY RIGHT DOWN • To adjust the microphone volume, use MIC 1/2 LEVEL. REMOTE CONTROL Turning it clockwise raises the level, while turing it counter-clockwise lowers the levels. (From the front panel) SHUTTLE DVD PLAYER STANDBY STANDBY/ON MIC1 MIC2 DVD 3 DVD 2 DVD 1 3 2 1 STOP PAUSE MIN MAX MIN RESERVE MAX DISC TITLE CHAP MIC1 RESUME THEATER DOLBY D I G I T A L 1 2 3 4 5 6 7 8 9 10 0 DVD EACH MIC2 PLAY KARAOKE ON/OFF SKIP +10 CANCEL DVD / SUPER VIDEO CD / VIDEO CD / CD 1 Press TITLE-KARAOKE while holding down SHIFT to turn on the KARAOKE function (or press KARAOKE on the front panel). KARAOKE operation 1 Each time you perform the operation above, the karaoke function turns on or off. When “on,” “KARAOKE” appears in the display on the front panel. (Display window) DISC KARAOKE KEY KARAOKE function indicator NOTES • When playing back a DVD VIDEO recorded with linear PCM audio, you cannot turn on the KARAOKE function. • When the KARAOKE function is active, you can specify a title in a DVD Video disc using the numeric buttons even during playback. Because most DVD discs assign a title to each song, you can easily select the desired song using the numeric buttons. (When the KARAOKE function is inactive, using the numeric button selects a DVD chapter during playback.) • During program or random playback, you cannot turn on the KARAOKE function. 36 EN36-42.XV-M565BK[U....]/3 36 7/4/00, 3:51 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A KARAOKE operation 2 Reserving songs Specify the disc by a DISC (1-3) button and then the title or track by the numeric buttons. You can reserve up to 12 songs to play in the desired order. Of course, it is possible to enjoy karaoke without reserving songs. 1 2 3 4 3- 5 1- 2 1- 7 2- 4 5 6 To playback songs reserved Example: To reserve track 13 of the disc loaded in tray 2: Press DISC 2 → +10 → 3. (From the remote control unit) 2 DISC 2 DISC 3 SUBTITLE AUDIO DIGEST DVD DISPLAY ANGLE STROBE ZOOM TIME 1 2 3 TV 1 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 TV 7 TV 8 TV 9 10 0 +10 TV -/-- TV 0 9 AMP VOL SLOW CANCEL STOP PAUSE The unit starts playback of the first reserved song. TV/VIDEO PLAY B.SKIP F.SKIP • If you operate steps 1 and 2 above during playback and press PLAY, the unit stops the current playback and starts playback of the songs in the reserved order. • If you do not press PLAY after carrying out step 1 and 2, the unit continues normal playback. To begin playback of reserved songs, bring up the reservation table on the TV screen and press PLAY. ENTE R 1 RESE E KARAOK RVE MENU TITLE UP LEFT CURSOR RIGHT DOWN REMOTE CONTROL 2 (From the front panel) STANDBY MIC1 MIC2 DVD 3 DVD 2 DVD 1 3 2 1 STOP PAUSE MIN MAX MIN RESERVE MAX DISC TITLE CHAP MIC1 RESUME THEATER DOLBY PLAY KARAOKE ON/OFF 1 2 3 4 5 6 7 8 9 10 0 DVD EACH MIC2 D I G I T A L A song which has finished playback is deleted from the reservation table. SHUTTLE DVD PLAYER STANDBY/ON Press PLAY. 3D PHONIC THEATER POSITION F.SEA RCH RCH B.SEA 3 TV ch TV VOL PLAY MODE RETURN SHIFT 3 The specified song is reserved and the moves to the next position. Repeat this operation until all desired songs (up to 12 songs) are reserved. You can reserve the same song more than once. TV CHOICE DISC 1 SKIP +10 CANCEL DVD / SUPER VIDEO CD / VIDEO CD / CD 2 After playing back all reserved songs, the unit stops, and the “PROGRAM” indicator in the display window turns off. KARAOKE operation • To check the reserved songs Press MENU-RESERVE while holding down SHIFT (or press RESERVE on the front panel) to display the reservation table. 3 1 7 When the KARAOKE function is active 1 • To cancel display of the reservation table Press MENU-RESERVE while holding down SHIFT (or press RESERVE on the front panel). The reservation table appears on the TV screen. If any song(s) is/are reserved, The “PROGRAM” indicator appears in the display window on the front panel. (TV screen) 1 2 3 4 5 6 Press MENU-RESERVE while holding down SHIFT (or press RESERVE on the front panel). • To reserve additional songs Make sure that points the next to the last song in the reservation table on the TV screen, and use the DISC and numeric buttons to select the song(s) you want to reserve. • To insert a song to be reserved Move to the position where you want to insert a song using CURSOR 2/3, then press the DISC and numeric button to select the song you want to reserve. • To cancel a reserved song Move to the song you want to cancel using CURSOR 2/3, then press PLAY MODE - CANCEL while holding down SHIFT (or press CANCEL on the front panel). Reservation table (Display window) While the unit is stopped, press STOP. PROGRAM KARAOKE DISC KEY PROGRAM indicator 37 • To cancel all songs NOTES • You cannot reserve songs during Video CD/SVCD playback with PBC. To reserve songs, press STOP before operating the above. • For Audio CDs, the A-B repeat function cannot be operated while playing back a reserved song. XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A KARAOKE operation (For SVCD) Selecting audio AUDIO 1/2 With guide vocal Most Karaoke discs have the capability of adding a “Guide vocal” or “Guide melody” to the Karaoke accompaniment. 1/2 2/2 Accompaniment only Total number of audio tracks Selected sound or channel Selecting audio track(s) [AUDIO] NOTES • To turn off the Karaoke menu With most DVD or SVCD Karaoke discs, you can choose audio track(s) some options such as “with guide vocal,” “with guide melody” and “accompaniment only.” You can choose “AUDIO” only for DVD and SVCD discs. appears on the TV screen The disc does not contain multi audio tracks, or the disc prohibits the audio selection. TV CHOICE DISC 1 DISC 2 DISC 3 SUBTITLE AUDIO DIGEST DVD STROBE ZOOM TIME 1 2 3 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 TV 7 TV 8 TV 9 10 0 +10 TV -/-- TV 0 AMP VOL SLOW 9 CANCEL RCH B.SEA TV/VIDEO F.SKIP STOP PAUSE Among “Karaoke” DVD discs, there are “Multi-sound Karaoke” discs. With such a disc, for example, you can sing along with the other vocal part recorded in a disc. 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP Selecting Karaoke sound [KARAOKE SOUND] TV ch TV VOL PLAY MODE RETURN SHIFT 1 DISPLAY ANGLE TV 1 ENTE R RESE E KARAOK RVE MENU TITLE 3 Press DISPLAY-TIME. • When UP CURSOR TV CHOICE DISC 1 RIGHT DOWN 2 DISC 2 DIGEST REMOTE CONTROL 7 During playback, when the KARAOKE function is DVD STROBE ZOOM TIME 1 2 3 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 TV 7 TV 8 TV 9 10 0 +10 TV -/-- TV 0 AMP VOL 9 TV ch TV VOL TV/VIDEO PLAY MODE RETURN CANCEL SHIFT RCH B.SEA Press DISPLAY-TIME. 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP R RVE MENU TITLE 3 ENTE RESE E KARAOK The Karaoke menu appears on the TV screen. F.SKIP STOP PAUSE 1 DISPLAY ANGLE TV 1 SLOW active 1 DISC 3 SUBTITLE AUDIO UP LEFT CURSOR RIGHT DOWN 2 Use CURSOR 2/3 to move 2 to [AUDIO]. REMOTE CONTROL AUDIO KARAOKE SOUND VOCAL ECHO EFFECT KEY CONTROL 1/1 L+R NORMAL 2 OFF +0 KARAOKE operation LEFT 7 During playback, when the KARAOKE function is active 1 Press DISPLAY-TIME. The Karaoke menu appears on the TV screen. 3 Use CURSOR 5/∞ to select the desired audio track(s) to be played back. Example: (For DVD) When playing back a “Multi-sound Karaoke” disc, [AUDIO] should be set to 1 (See the left column). 2 Use CURSOR 2/3 to move SOUND]. to [KARAOKE AUDIO 1/3 Multi audio karaoke 1/3 AUDIO KARAOKE SOUND VOCAL ECHO EFFECT KEY CONTROL 1/1 L+R NORMAL 2 OFF +0 2/3 With guide vocal 3/3 Accompaniment only Total number of audio tracks Selected sound or channel 38 EN36-42.XV-M565BK[U....]/f 38 7/13/00, 4:16 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A KARAOKE operation 3 Use CURSOR 5/∞ to select the desired sound to be played back. Example 1: A multi-sound Karaoke DVD Pressing CURSOR 5 button cycles the sound as follows. Pressing CURSOR ∞ cycles the sound in reverse order. 1 With guide vocal (1) 2 With guide vocal (2) 1+2 Masking the vocal recorded on a disc [VOCAL MASK] Using the Vocal mask function, you can mask a vocal recorded on normal non-Karaoke discs. When playing back a Karaoke disc, such as a disc with multiplex audio and multi-sound Karaoke, eliminate the vocal by selecting “KARAOKE SOUND,” instead of “VOCAL MASK” (See page 38). With guide vocal (1+2) TV CHOICE DISC 1 PRO Only accompaniment OFF DISC 2 DISC 3 SUBTITLE AUDIO DIGEST With guide melody DVD STROBE ZOOM TIME 1 2 3 TV 1 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 TV 7 TV 8 TV 9 10 0 +10 TV -/-- TV 0 AMP VOL SLOW 9 TV ch TV VOL TV/VIDEO PLAY MODE RETURN “2” and “1+2” above appear only with materials for vocal duet. CANCEL SHIFT RCH B.SEA L Left channel audio R Right channel audio R RVE MENU TITLE UP LEFT Pressing CURSOR 5 button cycles the sound as follows. Pressing CURSOR ∞ cycles the sound in reverse order. L+R Stereo audio ENTE RESE E KARAOK 3 F.SKIP STOP PAUSE Example 2: A Video CD, SVCD or Audio CD with Karaoke 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP 1 DISPLAY ANGLE CURSOR RIGHT DOWN 2 REMOTE CONTROL 7 During playback, when the KARAOKE function is active 1 Press DISPLAY-TIME. The Karaoke menu appears on the TV screen. If [KARAOKE SOUND] is set to L or R, the Vocal mask function does not work correctly. Change the setting to L+R (See page 37). NOTES KARAOKE operation • To turn off the Karaoke menu Press DISPLAY-TIME. • For Video CD and SVCD, the selection of [KARAOKE SOUND] matches the audio selection using the AUDIO button. 2 Use CURSOR 2/3 to move to [VOCAL]. AUDIO KARAOKE SOUND VOCAL ECHO EFFECT KEY CONTROL 1/1 L+R NORMAL 2 OFF +0 • With a DVD disc which does not contain “Multi-sound Karaoke,” [KARAOKE SOUND] cannot be changed. 3 Use CURSOR 5/∞ to select [MASK]. Pressing CURSOR 5 cycles the vocal mode as shown below. Pressing CURSOR ∞ cycles the mode in reverse order. NORMAL MASK REPLACE 39 EN36-42.XV-M565BK[U....]/f 39 7/13/00, 4:16 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A KARAOKE operation 3 NOTES Use CURSOR 5/∞ to select [REPLACE]. Pressing CURSOR 5 cycles the mode as shown below. • To turn off the Karaoke menu Press DISPLAY-TIME. • If [KARAOKE SOUND] is set to L or R, the vocal mask function does not work correctly. Pressing CURSOR ∞ cycles the mode in reverse order. NORMAL • With some materials, such as those recorded in monaural and sung by multiple voices, the voice may not be satisfactorily masked. MASK REPLACE Playing back the guide vocal only when you stop singing [VOCAL REPLACE] 7 The recorded voice (guide vocal) is played back only when no sound is fed to the microphone(s). NOTES • To turn off the Karaoke menu You may have experiences where you could not sing in the middle of a Karaoke song because you forgot the melody, etc. In such cases, by using the vocal replace function, the guide vocal automatically replaces your voice when you stop singing. It may be useful for practicing Karaoke. TV CHOICE DISC 1 DISC 2 DISC 3 SUBTITLE AUDIO DIGEST DVD STROBE ZOOM TIME 1 2 3 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 TV 7 TV 8 TV 9 10 0 +10 TV -/-- 1 DISPLAY ANGLE TV 1 9 TV 0 AMP VOL SLOW TV ch TV VOL TV/VIDEO PLAY MODE RETURN CANCEL SHIFT RCH B.SEA 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP F.SKIP STOP PAUSE ENTE R RESE E KARAOK RVE MENU TITLE 3 Press DISPLAY-TIME. • When playing back a disc with the multiplex audio or with multi-sound Karaoke, the guide vocal is not played back at all. With other discs, the voice may not be satisfactorily masked. UP LEFT CURSOR RIGHT DOWN 2 KARAOKE operation REMOTE CONTROL 7 During playback, when the KARAOKE function is active 1 Press DISPLAY-TIME. The Karaoke menu appears on the TV screen. If the disc is recorded with the multiplex audio, set [KARAOKE SOUND] to L or R for playing back the guide vocal. If the disc is not recorded for Karaoke, set [KARAOKE SOUND] to L+R (See page 38 and 39). 2 Use CURSOR 2/3 to move to [VOCAL]. AUDIO KARAOKE SOUND VOCAL ECHO EFFECT KEY CONTROL 1/1 L+R NORMAL 2 OFF +0 40 EN36-42.XV-M565BK[U....]/f 40 7/13/00, 4:16 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A KARAOKE operation Adding an effect to your voice You can add various effects to your voice using the Echo and Vocal Effect functions. Adding various effects to the vocal [VOCAL EFFECT] TV CHOICE DISC 1 Adding an echo effect [ECHO] DISC 2 DIGEST CHOICE DISC 1 DISC 2 DISC 3 SUBTITLE AUDIO DIGEST TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 8 9 TV 9 10 0 +10 TV -/-- TV 0 9 TV ch TV VOL TV/VIDEO PLAY MODE RETURN CANCEL SHIFT 3D PHONIC THEATER POSITION F.SEA RCH PLAY R RVE MENU TITLE 3 ENTE RESE E KARAOK TV/VIDEO F.SKIP STOP PAUSE UP LEFT CURSOR RIGHT DOWN 2 3D PHONIC THEATER POSITION F.SEA RCH F.SKIP REMOTE CONTROL STOP ENTE R RESE E KARAOK RVE MENU TITLE 3 AMP VOL SLOW TV ch TV VOL PLAY B.SKIP PAUSE TV 9 +10 RCH TV 8 B.S TV 6 8 TV 8 B.SKIP 7 CANCEL TV 5 7 TV 7 B.SEA TV 7 H EARC 1 TIME TV 1 SHIFT TV 4 0 3 AMP VOL 6 TV 0 1 TIME 3 TV 3 5 10 ZOOM PLAY MODE RETURN ZOOM 2 TV 2 4 TV -/-- 2 SLOW STROBE 1 TV 1 TV 1 DVD DISPLAY ANGLE DVD DISPLAY ANGLE STROBE DISC 3 SUBTITLE AUDIO UP LEFT CURSOR RIGHT DOWN 2 REMOTE CONTROL 7 When the KARAOKE function is active 1 Press DISPLAY-TIME. The Karaoke menu appears on the TV screen. 7 When the KARAOKE function is active 1 2 Press DISPLAY-TIME. Use CURSOR 2/3 to move The Karaoke menu appears on the TV screen. 2 Use CURSOR 2/3 to move to [EFFECT]. AUDIO KARAOKE SOUND VOCAL ECHO EFFECT KEY CONTROL 1/1 L+R NORMAL 2 OFF +0 to [ECHO]. AUDIO KARAOKE SOUND VOCAL ECHO EFFECT KEY CONTROL 1/1 L+R NORMAL 2 OFF +0 KARAOKE operation 3 Use CURSOR 5/∞ to select the effect. Pressing CURSOR 5 button cycles the effect as follows. Pressing CURSOR ∞ cycles the effect in reverse order. 3 OFF Use CURSOR 5/∞ to adjust the echo level. CHORUS Each time you press CURSOR 5, the echo level increases. FLANGER Pressing CURSOR ∞ changes the echo level decreases. HARMONY The higher the number, the stronger the echo. 3 2 1 NOTE • To turn off the Karaoke menu Press DISPLAY-TIME. OFF • CHORUS: Produces a doubling effect on your vocal, as if another person is singing in unison. • FLANGER: Adds a wet, metallic sweeping sound to your voice, similar to some electric guitar sounds. • HARMONY: Adds a harmony vocal to your voice. NOTE • To turn off the Karaoke menu Press DISPLAY-TIME. 41 EN36-42.XV-M565BK[U....]/f 41 7/13/00, 4:16 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A KARAOKE operation Operating from the remote control unit Shifting the musical key You can shift the musical key of a song recorded on a disc to fit to your voice. TV CHOICE DISC 1 DISC 2 DISC 3 SUBTITLE AUDIO Operating from the front panel DIGEST 1 DVD STROBE ZOOM TIME 1 2 3 TV 1 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 TV 7 TV 8 TV 9 10 0 +10 TV -/-- TV 0 AMP VOL SLOW 9 TV ch TV VOL TV/VIDEO PLAY MODE RETURN CANCEL SHIFT 3D PHONIC THEATER POSITION F.SEA RCH RCH STANDBY STANDBY/ON B.SEA SHUTTLE DVD PLAYER PLAY B.SKIP DVD 3 3 DVD 2 2 DVD 1 MIC2 R MIN MAX MIN RESERVE MAX DISC TITLE CHAP MIC1 RESUME THEATER DOLBY D I G I T A L 1 2 3 4 5 6 7 8 9 10 0 SKIP +10 RVE MENU TITLE 3 PLAY KARAOKE ON/OFF DVD EACH MIC2 KARAOK 1 STOP PAUSE ENTE RESE E MIC1 F.SKIP STOP PAUSE 1 DISPLAY ANGLE UP LEFT CANCEL CURSOR RIGHT DOWN DVD / SUPER VIDEO CD / VIDEO CD / CD 2 REMOTE CONTROL 7 When the KARAOKE function is active 1 Use the Key control buttons (i, shift the musical key. and I) to 7 When the KARAOKE function is active 1 The Karaoke menu appears on the TV screen. • Pressing i raises the key. • Pressing I drops the key. • Pressing returns to the original key. Press DISPLAY-TIME. 2 Use CURSOR 2/3 to move CONTROL]. The key shift status appears in the front panel display window, as well as on the TV screen. to [KEY AUDIO KARAOKE SOUND VOCAL ECHO EFFECT KEY CONTROL 1/1 L+R NORMAL 2 OFF +0 3 Selected key number Use CURSOR 5/∞ to shift the musical key. • Pressing CURSOR 5 raises the key. • Pressing CURSOR ∞ drops the key. (TV screen) KEY CONTROL The key shift status appears in the front panel display window and on the TV screen, in the same way as it appears when using the key control buttons on the front panel. KARAOKE operation (Display window) NOTES • To turn off the Karaoke menu Press DISPLAY-TIME. NOTES • The key returns to the normal key after the current song ends. • While an Audio CD disc is selected (not only during playback but also while stopped), the key control function does not affect the output signal from the DIGITAL OUT jack. • The key returns to the normal key after the current song ends. • While an Audio CD disc is selected (not only during playback but also while stopped), the key control function does not affect the output signal from the DIGITAL OUT jack. 42 EN36-42.XV-M565BK[U....]/f 42 7/13/00, 4:16 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A Initial settings Initial settings 3 Selecting preferences You can set various preferences for playback via four dedicated displays. Press CURSOR 2/3 to select the setting you want. • To turn off the preference display, press DISC 1 - CHOICE while holding down SHIFT, or move to [EXIT] and press ENTER. • For details about each setting, see the following How to set preferences paragraphs: Note that you cannot bring up a preference display during playback or when an Audio CD is loaded in the currently selected tray. DISC 2 DIGEST DISC 3 DVD ANGLE DISPLAY ZOOM TIME STROBE 1 2 3 TV 1 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 9 TV 7 TV 8 TV 9 10 0 +10 TV -/-- TV 0 AMP VOL SLOW 1 CANCEL H RC B.SEA TV/VIDEO F.SKIP STOP PAUSE Each time you press CURSOR 3, the language setting changes in the following order: 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP You can select the default “display” language to be displayed if it is contained on the disc. TV ch TV VOL PLAY MODE RETURN SHIFT R LEFT 3 One of the preference pages appears on the TV screen. There are four preference pages: LANGUAGE, AUDIO, DISPLAY and SYSTEM. To turn the page, move to the desired tab using CURSOR 2/3. LANGUAGE Initial settings AUDIO DISPLAY SYSTEM LANGUAGE AUDIO ENGLISH DIGITAL AUDIO OUTPUT AUDIO LANGUAGE ENGLISH DOWN MIX SUBTITLE ENGLISH ON SCREEN LANGUAGE ENGLISH ON EXIT KEY PRESS AUDIO ON SCREEN GUIDE ENGLISH ON SCREEN LANGUAGE ENGLISH EXIT KEY DISPLAY SYSTEM LANGUAGE 4:3 LB AUDIO AUTO STANDBY MODE 2 DISPLAY AV COMPULINK MODE PRESS SYSTEM DVD 1 KEY Move to select the item you want to set by using CURSOR 5/∞. AUDIO DISPLAY SYSTEM MENU LANGUAGE ENGLISH AUDIO LANGUAGE ENGLISH SUBTITLE ENGLISH ON SCREEN LANGUAGE ENGLISH EXIT PRESS * If the selected language is not recorded, the disc’s default display language will be displayed. AUDIO LANGUAGE You can select the default audio language to be played if it is contained on the disc. Each time you press CURSOR 3, the language setting changes in the following order: LANGUAGE AUDIO DISPLAY SYSTEM MENU LANGUAGE ENGLISH AUDIO LANGUAGE ENGLISH SUBTITLE ENGLISH ON SCREEN LANGUAGE ENGLISH EXIT PRESS KEY ENGLISH = SPANISH = FRENCH = CHINESE = GERMAN = ITALIAN = JAPANESE = language code from AA to ZU (See “Table of languages and their abbreviations” at the end of this manual.) EXIT EXIT KEY LANGUAGE Pressing CURSOR 2 changes the language setting in the reverse order of the above. OFF OFF RESUME ON (See “Table of languages and their abbreviations” at the end of this manual.) KEY SYSTEM SCREEN SAVER 2 /PCM Lo / Ro EXIT PRESS SYSTEM DOLBY DIGITAL COMPRESSION DISPLAY 43 DISPLAY MENU LANGUAGE MONITOR TYPE SUBTITLE ENGLISH = SPANISH = FRENCH = CHINESE = GERMAN = ITALIAN = JAPANESE = language code from AA to ZU RIGHT CURSOR Press DISC 1 - CHOICE while holding down SHIFT. LANGUAGE AUDIO LANGUAGE ENGLISH RVE is loaded in the selected tray PRESS SYSTEM ENGLISH UP 7 While the unit is stopped except when an Audio CD AUDIO DISPLAY MENU TITLE REMOTE CONTROL LANGUAGE AUDIO MENU LANGUAGE PRESS ENTE DOWN 1 LANGUAGE RESE E KARAOK 2 MENU LANGUAGE TV CHOICE DISC 1 SUBTITLE AUDIO LANGUAGE page KEY Pressing CURSOR 2 changes the language setting in the reverse order of the above. * If the selected language is not recorded, the disc’s default audio language will be played. XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A Initial settings You can select the default subtitle language to be displayed if it is contained on the disc. Each time you press CURSOR 3, the language setting changes in the following order: LANGUAGE AUDIO DISPLAY SYSTEM MENU LANGUAGE ENGLISH AUDIO LANGUAGE ENGLISH SUBTITLE ENGLISH ON SCREEN LANGUAGE ENGLISH EXIT PRESS KEY ENGLISH = SPANISH = FRENCH = CHINESE = GERMAN = ITALIAN = JAPANESE = language code from AA to ZU (See “Table of languages and their abbreviations” at the end of this manual.) Pressing CURSOR 2 changes the language setting in the reverse order of the above. * If the selected language is not recorded, the disc’s default subtitle language will be displayed. ON SCREEN LANGUAGE You can select the on-screen display language to be displayed. LANGUAGE Each time you press CURSOR 3, the language setting changes as follows: AUDIO DISPLAY SYSTEM MENU LANGUAGE ENGLISH AUDIO LANGUAGE ENGLISH SUBTITLE ENGLISH ON SCREEN LANGUAGE ENGLISH EXIT PRESS KEY ENGLISH (Chinese) ESPAÑOL (Spanish) English ON SCREEN LANGUAGE ENGLISH Chinese Spanish IDIOMA EN PANTALLA ESPAÑOL Pressing CURSOR 2 changes the language setting in the reverse order of the above. English AUDIO page Français DIGITAL AUDIO OUTPUT To connect the unit‘s digital output to an external device equipped with a digital input, this item must be set correctly. AUDIO LANGUAGE DISPLAY DIGITAL AUDIO OUTPUT SYSTEM DOLBY DIGITAL /PCM Lo / Ro DOWN MIX COMPRESSION ON EXIT PRESS KEY • PCM ONLY: When you connect the DIGITAL OUT jack of the unit to the linear PCM digital input of other audio equipment. • STREAM/PCM: When you connect to the digital input of an amplifier to a built-in DTS, Dolby Digital, or MPEG multichannel decoder. • DOLBY DIGITAL/PCM: When you connect to the digital input of a Dolby Digital decoder, or an amplifier with a built-in Dolby Digital decoder. The following chart shows the relationship between types of playback discs and output signals. Output Playback discs STREAM/PCM DOLBY DIGITAL/PCM 48-kHz, ← DVD with 48-kHz, 16-bit linear 16-bit linear PCM PCM DVD with 48-kHz, 48-kHz, 20-bit linear 20/24-bit linear PCM PCM DVD with 96-kHz, No output linear PCM DTS DVD with DTS bitstream PCM ONLY ← ← ← ← ← No output ← ← 48-kHz, 16-bit linear PCM 48-kHz, 16-bit linear PCM ← DVD with Dolby Digital Dolby Digital bitstream DVD with MPEG multichannel MPEG bitstream Video CD/SVCD 44.1-kHz, 16-bit linear PCM ← ← Audio CD 44.1-kHz, 16-bit linear PCM ← ← Audio CD with DTS DTS bitstream ← ← Initial settings SUBTITLE NOTES • The unit does not provide the DTS decoding function. • When playing a DVD VIDEO or Audio CD disc with DTS, use a DTS decoder to get correct signals from your speakers. Never use the unit's analog output jacks, which output incorrect signals that may damage your speakers. • If you connect the analog outputs and digital outputs simultaneously, be sure to select the source of the amplifier correctly, or set the level control of the amplifier connected to the analog outputs to minimum. 44 EN43-48.XV-M565BK[U....]/3 44 7/4/00, 3:52 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A Initial settings DOWN MIX To playback a DVD VIDEO AUDIO DISPLAY SYSTEM LANGUAGE disc recorded with /PCM DIGITAL AUDIO OUTPUT Lo / Ro DOWN MIX surround multichannel ON COMPRESSION audio correctly, the EXIT DOWN MIX setting must PRESS KEY be properly made according to your audio system. Note that this setting affects the output signal from the AUDIO (both DIGITAL and ANALOG) output jacks when playing back a DVD VIDEO disc recorded with surround multichannel audio. DOLBY DIGITAL • Lt/Rt When you enjoy multichannel surround audio by connecting the unit's AUDIO output (normally, the DIGITAL output) to a surround decoder. • L0/R0 When you enjoy conventional 2-channel stereo audio by connecting the unit's AUDIO output(s) to a stereo amplifier/receiver or television set, or when you duplicate audio of a DVD VIDEO disc recorded with surround audio to your MD, cassette, etc. NOTE • The Down mix function does not work when the 3D PHONIC function is activated. COMPRESSION You can compress the dynamic range of the sound if needed. Using this function, you can listen to sound at low volumes easily. LANGUAGE AUDIO DIGITAL AUDIO OUTPUT DISPLAY SYSTEM DOLBY DIGITAL /PCM Lo / Ro DOWN MIX COMPRESSION ON MONITOR TYPE You can select the monitor type to match your TV when you playback DVD VIDEO discs recorded for wide screen televisions. LANGUAGE AUDIO MONITOR TYPE SCREEN SAVER DISPLAY SYSTEM 4:3 LB MODE 2 ON ON SCREEN GUIDE EXIT PRESS KEY (Letter Box Conversion) • 4:3 LB When you connect a normal TV to the unit. When you play a wide picture recorded on a DVD VIDEO disc, the picture is displayed with bands across the upper and lower portions of the screen. (Pan Scan Conversion) • 4:3 PS When you connect a normal TV to the unit. When you play a wide picture recorded on a DVD VIDEO disc, a portion of the picture is automatically cut off from the left and right sides of the image. Depending on the disc, it may not be possible to playback in this mode. In such a case, the picture is played back as in 4:3 mode. LB • 16:9 WIDE (Wide Television screen) When you connect a wide-screen TV to the unit. EXIT PRESS KEY • ON Audio is played back with the dynamic range compressed. Initial settings DISPLAY page • OFF Audio is played back as it was recorded. NOTES • The Compression function works only when playing back a disc recorded with DOLBY DIGITAL 1CH or 2CH. The setting is not effective for other discs. • The Compression function does not work when the 3D PHONIC function is activated. SCREEN SAVER A television monitor screen may be burned out if a static picture is displayed for a long time. To prevent this, the unit automatically activates the screen saver function if a static picture, such as an on-screen display or menu, is displayed for over 5 minutes. • MODE 1 The current picture gets dark. LANGUAGE AUDIO MONITOR TYPE SCREEN SAVER • MODE 2 The “screen saver” picture appears and its brightness changes. ON SCREEN GUIDE DISPLAY SYSTEM 4:3 LB MODE 2 ON EXIT PRESS KEY • OFF The screen saver function is off. NOTES • The monitor screen of a projector or projection TV is easily burned out if the screen saver mode is set to OFF and a static picture is displayed for a long time. • The screen saver function is not activated when the selected disc is an Audio CD. 45 EN43-48.XV-M565BK[U....]/f 45 7/13/00, 4:20 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A Initial settings ON SCREEN GUIDE The unit can display “onscreen guide” icons or characters on the picture, which show what is happening to the disc or the unit. LANGUAGE AUDIO DISPLAY MONITOR TYPE SCREEN SAVER ON SCREEN GUIDE MODE 2 ON EXIT PRESS KEY • OFF The on-screen guide will not be displayed. Examples of “on-screen guide” icons or characters: , Français SYSTEM 4:3 LB • ON The on-screen guide will be displayed. , English SYSTEM page AUTO STANDBY When the unit is stopped for more than 30 minutes or 60 minutes, the unit enters standby mode automatically. LANGUAGE AUDIO DISPLAY SYSTEM OFF AUTO STANDBY OFF RESUME AV COMPULINK MODE DVD 1 EXIT PRESS KEY • 60 Time is set to 60 minutes. • 30 Time is set to 30 minutes. • OFF The auto standby function is off. RESUME You can select the resume function to be on or off. See page 20. LANGUAGE AUDIO SYSTEM OFF OFF RESUME AV COMPULINK MODE • ON Pressing PLAY while stopped or on standby starts playback from the resume point if it is memorized. DISPLAY AUTO STANDBY DVD 1 EXIT PRESS KEY • OFF Pressing PLAY while stopped or on standby starts playback from the beginning of the disc. AV COMPULINK MODE LANGUAGE AUDIO AUTO STANDBY DISPLAY SYSTEM OFF OFF RESUME AV COMPULINK MODE DVD 1 EXIT PRESS KEY Initial settings If you use the AV Compulink system, you must set this item correctly. Select from the three options: “DVD1,” “DVD2” and “DVD3” according to the equipment to be connected. See page 49. 46 EN43-48.XV-M565BK[U....]/3 46 7/4/00, 3:52 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A Initial settings Limiting playback by children 4 While points [Set Level], use CURSOR 2/3 to select the parental lock level. PARENTAL LOCK This function restricts playback of DVD VIDEO discs which contain violent (and other) scenes according to the level set by the user. For example, if a movie which includes violent scenes supports the parental lock feature, such scenes which you do not want to let children view can be cut or replaced with other scenes. DISC 2 DISC 3 DIGEST EXIT PRESS 1 ZOOM 1 . . . 8 TIME 1 2 3 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 9 TV 7 TV 8 TV 9 10 0 +10 TV -/-- TV 0 AMP VOL CANCEL RCH B.SEA Discs rated higher than the selected level are restricted. 3D PHONIC THEATER POSITION F.SEA RCH F.SKIP STOP PAUSE “1” is the strictest level. “–” means no restriction. TV/VIDEO PLAY B.SKIP 1, 3, 5, 7 ENTE R RESE E KARAOK RVE MENU TITLE – 6 TV ch TV VOL PLAY MODE RETURN SHIFT ENTER Each time you press CURSOR 2/3, the parental level changes as follows: DVD TV 1 SLOW KEY DISPLAY ANGLE STROBE ---- PASS WORD TV CHOICE DISC 1 1 Set Level To set Parental Lock for the first time [PARENTAL LOCK] SUBTITLE AUDIO MY Country Code 5 Press ENTER. UP LEFT 2, 4 CURSOR moves to [PASSWORD]. RIGHT DOWN 6 REMOTE CONTROL Enter your 4-digit password using the numeric buttons (0 to 9). 7 While a DVD VIDEO disc is stopped or no disc is PARENTAL LOCK inserted Country Code Set Level PASS WORD 1 Press ENTER while holding down SHIFT. Initial settings 2 1 ---- EXIT The Parental Lock on-screen display appears on the TV screen. points [Country Code]. MY NEW PASSWORD? ··· PRESS 0~9 KEY. 7 Press ENTER. While points [Country Code], use CURSOR 2/3 to select the country code. The parental level and password are set. The country code whose standards were applied to rate the DVD VIDEO disc should be selected. Pressing ENTER again returns to the opening display. moves to [EXIT]. See "Appendix B: Country code list for parental lock." If you enter an undesired password in step 6 above, reenter the password before pressing ENTER. PARENTAL LOCK MY Country Code Set Level — PASS WORD ---- EXIT PRESS 3 KEY ENTER Press ENTER. moves to [Set Level]. 47 XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A Initial settings Even if you want to change only the country code and/or parental level, do not forget to enter the password after changing the country code and/or parental level. Otherwise, the new country code and/or parental level will not become effective. Pressing ENTER again returns to the opening display. To change the settings [PARENTAL LOCK] TV CHOICE DISC 1 DISC 2 DISC 3 SUBTITLE AUDIO DIGEST DISPLAY ANGLE STROBE ZOOM TIME 1 2 3 TV 1 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 TV 7 TV 8 TV 9 10 0 +10 TV -/-- TV 0 AMP VOL SLOW 1 DVD CANCEL RCH B.SEA TV/VIDEO 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP STOP PAUSE F.SKIP 1, 2, 3, 4, 5 ENTE R RESE E KARAOK RVE MENU TITLE UP LEFT 3, 4 CURSOR Français NOTES TV ch TV VOL PLAY MODE RETURN SHIFT 2, 5 9 English • When you enter the wrong password more than 3 times in step 2 above, moves to [EXIT] automatically and CURSOR 5/∞ does not work. • If you forget your password in step 2: Enter “8888.” RIGHT DOWN REMOTE CONTROL To temporarily release the Parental lock [PARENTAL LOCK] You can change the Parental lock settings later. 7 While a DVD VIDEO disc is stopped or no disc is inserted DIGEST Press ENTER while holding down SHIFT. The Parental Lock on-screen display appears on the TV screen. DISC 2 STROBE points [PASSWORD]. PASS WORD ZOOM TIME 1 2 3 TV 2 TV 3 4 5 6 TV 4 TV 5 TV 6 7 8 TV 7 TV 8 TV 9 10 0 +10 TV -/-- TV 0 AMP VOL SLOW Set Level DVD DISPLAY ANGLE TV 1 PARENTAL LOCK Country Code DISC 3 9 TV ch TV VOL MY TV/VIDEO PLAY MODE RETURN 1 CANCEL SHIFT ---- RCH B.SEA STOP PAUSE EXIT 3D PHONIC THEATER POSITION F.SEA RCH PLAY B.SKIP F.SKIP ENTE R RESE E KARAOK RVE MENU TITLE CURRENT PASSWORD? ··· PRESS 0~9 KEY. UP LEFT CURSOR RIGHT DOWN 2 Enter your current 4-digit password using the numeric buttons (0 to 9) and press ENTER. moves to [Country Code] if you enter the correct password. If you enter the wrong password, “WRONG! RETRY……” appears on the TV screen, and you cannot go to next step. 3 To change the country code, use CURSOR 2/ 3 to select the desired country code and press ENTER. To change the set level, use CURSOR 2/3 to select the desired level while points [Set Level], and then press ENTER. moves to [PASSWORD]. 5 Enter the password using the numeric buttons (0 to 9) and press ENTER. moves to [EXIT]. The password entered in the above step becomes the new password. If you do not change the password, enter the same password as in the step 2. 1 REMOTE CONTROL When you set the parental level strictly, some discs may not be played back at all. When you insert such a disc and try to play it, the following Parental Lock onscreen display appears on the TV screen, asking you whether you want the parental lock to be temporarily released or not. 1 Use the CURSOR 5/∞ to move then press ENTER. moves to the PASSWORD field. moves to [Set Level]. When you change the country code, you must select the parental level. 4 2 When selecting [NO], press OPEN/ CLOSE to remove the disc. 2 to [YES], PARENTAL LOCK This DISC can’t play now! Temporary YES Level Change ? NO PASSWORD PRESS ENTER Initial settings 1 TV CHOICE DISC 1 SUBTITLE AUDIO –––– EXECUTE Enter your 4-digit password using the numeric buttons (0 to 9). If you enter the wrong password, “WRONG! RETRY…” appears on the TV screen, and you cannot go to next step. The Parental lock is released, and the unit starts playback. NOTE • When you enter the wrong password more than 3 times in step 2 above, moves to [NO] automatically and CURSOR 5/∞ do not work. 48 XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A Additional information Additional information AV COMPU LINK remote control system When you buy a separate TV, VCR, DVD player, receiver, or other component and connect them to each other, you have to operate each component individually. JVC’s AV COMPU LINK remote control system meets the demands of a system made up of single components and has the ease of operation of a single unit. Connection and setup Using the AV COMPU LINK cable, connect the AV COMPU LINK terminals of each component to one another. To AV COMPU LINK (II or EX) TV DVD player • If you connect a DVD player to a television via AV COMPU LINK, set the DVD player’s AV COMPU LINK setting as follows. • When connecting to VIDEO-1 input terminal of the television: DVD2 • When connecting to VIDEO-2 input terminal of the television: DVD3 To AV COMPU LINK (II or EX) To AV COMPU LINK TV DVD player VCR (Video Cassette Recorder) • If you connect a DVD player to a television and VCR via AV COMPU LINK, set the VCR’s Remote Control Code and DVD player’s AV COMPU LINK setting as follows. • When connecting to VIDEO-1 input terminal of the television: DVD player’s AV COMPU LINK setting: DVD2 VCR’s Remote Control Code: B • When connecting to VIDEO-2 input terminal of the television: DVD player’s AV COMPU LINK setting: DVD3 VCR’s Remote Control Code: A Additional information To AV COMPU LINK (II or EX) TV Receiver DVD player • If you connect a DVD player to a television and receiver via AV COMPU LINK, set the DVD player’s AV COMPU LINK setting to DVD1. • The DVD player’s AV COMPU LINK setting is operated in the SYSTEM page of the preference display. See page 46 for operation. • For information on the connection between the TV and the Receiver, refer to the Receiver’s Instructions. IMPORTANT! If you connect the component video output to your TV: • set the DVD player’s AV COMPULINK setting to DVD1. • make the video/audio connection between the DVD player and your receiver using the supplied audio/video cable, and do not make the S-VIDEO connection. 49 EN49-53.XV-M565BK[U....]/3 49 7/4/00, 3:54 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A Additional information Notes for connection English • If you connect a DVD player to a receiver via AV COMPU LINK in a system including a Dolby digital decoder, some functions may not be performed automatically. Français • The AV COMPU LINK terminal on some televisions indicates “II.” Do not connect the terminal indicating “II” with the AV COMPU LINK terminal on a receiver. If connected, the system will not work correctly. • Connect the AUDIO OUT jacks of the DVD player to the audio input jacks of a receiver that indicating “DVD.” Otherwise, the system will not work correctly. • There may be no description about connections to a DVD player in the instruction manual of a television or VCR. However a television or VCR with AV COMPU LINK terminals indicating “II” or “EX” can be connected to a DVD player. Operation You can enjoy pictures and/or sound by just putting a source component (which plays back the pictures and/or sound such as a DVD player or VCR) into play mode. You do not have to operate the TV and receiver including not having to perform power switching. 1 Turn on the main power of the television. 2 Insert a disc into the source component. 3 Press PLAY of the source component. Additional information The following actions are performed automatically: • Turning on the power for the television. • Setting the source of the television to the external input (VIDEO-1 or VIDEO-2). • Turning on the power for the receiver. • Setting the source of the receiver to the component which has started playback. 50 EN49-53.XV-M565BK[U....]/3 50 7/4/00, 3:54 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A Additional information Care and handling of discs How to handle discs When handling a disc, do not touch the surface of the disc. Since discs are made of plastic, they are easily damaged. If a disc gets dirty, dusty, scratched or warped, the images and sound will not be picked up correctly, and such a disc may cause the player to malfunction. Label side Do not damage the label side, stick paper to or use any adhesive on its surface. Storage Make sure that discs are kept in their cases. If discs are piled on top of one another without their protective cases, they can be damaged. Do not put discs in a location where they may be exposed to direct sunlight, or in a place where the humidity or temperature is high. Avoid leaving discs in your car! Maintenance of discs If there are fingerprints or other dirt adhering to a disc, wipe with a soft dry cloth, moving from the center outwards. If a disc is difficult to clean, wipe with a cloth moistened with water. Never use record cleaners, petrol, alcohol or any antistatic agents. CAUTION Additional information Sometimes during play noise or images may be garbled. This is sometimes due to the disc. (It may not be up to industry standards.) These symptoms are caused by the discs, not by the malfunction of the unit. 51 EN49-53.XV-M565BK[U....]/3 51 7/4/00, 3:54 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A Additional information English Troubleshooting Français What appears to be a malfunction may not always be serious. Please go through the following list before requesting service. Symptom Possible case Remedy Power does not come on. Power plug is not inserted securely. Plug in securely. Remote control does not work. Too far from the unit. More closer to the unit. The tip of the remote unit is not pointed in the right direction. Point the infrared light- emitting window toward the remote sensor on the front panel. Batteries are exhausted. Replace the batteries with new ones. Battery polarity is incorrect. Take out the batteries and insert them again in the correct direction. Connection of video cable is incorrect. Connect the cable correctly. Input selection of TV is incorrect. Select correctly. Disc is not playable. Use a playable disc. (See page 11.) Picture is noisy. The unit is connected to a VCR directly and the copyguard function is activated. Connect the unit so that the picture signal flows directly to the TV. No audio is reproduced. Connection is incorrect. Check the connections. Input selection of amplifier is incorrect. Select correctly. No picture is displayed on the monitor. No audio is reproduced when The audio signal is derived from the playing back a DVD disc recorded unit's DIGITAL OUT. with 96-kHz, linear PCM audio. Use the AUDIO OUT when playing back such discs. Sound is distorted or noise is generated. Wipe the disc surface. Disc is dirty. Picture does not fit the television MONITOR TYPE is not correctly set. screen. Television is not correctly set. Select monitor type correctly. (See page 45.) Operation is not possible. Microcomputer malfunction due to lightning or static electricity. Turn off the power and unplug the power cord, then connect the power cord again. Moisture condensation caused by a sudden change of temperature or humidity. Turn off the power, then turn it on a few hours later. Additional information Set the television correctly. 52 EN49-53.XV-M565BK[U....]/3 52 7/4/00, 3:54 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A Additional information Specifications General Readable discs: Video format: DVD VIDEO, Audio CD, Video CD, SVCD NTSC color, PAL selectable Other Power requirements: Power consumption: Mass: Dimensions (W x H x D): AC 110 V - 240 V , 50 Hz/60 Hz 15 W (POWER ON), 2.7 W (STANDBY mode) 4.6 kg (10.2 lbs) 435 mm x 126.5 mm x 324.6 mm (17-3/16 inch x 5 inch x 12-13/16 inch) Video output COMPONENT (pin jacks): VIDEO OUT (pin jack): S-VIDEO OUT (S jack): Horizontal resolution: Signal to noise ratio: Y Output: PB/PR Output: 1.0 Vp-p (75 Ω) Y Output: C Output: 500 Lines 65 dB 1.0 Vp-p (75 Ω) 0.7 Vp-p (75 Ω) 1.0 Vp-p (75 Ω) 286 mVp-p (75 Ω) Audio output ANALOG OUT (pin jack): DIGITAL OUT (COAXIAL): (OPTICAL): ATTENUATOR OFF: 2.0 Vrms (10 kΩ) ATTENUATOR ON: 1.0 Vrms (10 kΩ) 0.5 Vp-p (75 Ω termination) – 21 to –15 dBm (Peak) Audio intput MIC1/MIC2: 2 mVrms (8.2 kΩ) Audio characteristics Frequency response: Dynamic range: Wow and flutter: Total harmonic distortion: CD (sampling frequency 44.1 kHz): DVD (sampling frequency 48 kHz): DVD (sampling frequency 96 kHz): 16 bit: More than 98 dB 20 bit: More than 106 dB 24 bit: More than 106 dB Unmeasurable (less than ± 0.002%) Less than 0.002% Additional information * Specifications and appearance subject to change without prior notice. 53 2 Hz to 20 kHz 2 Hz to 22 kHz 2 Hz to 44 kHz XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A Appendix A: Table of languages and their abbreviations When you select the subtitle language or sound, the languages shown below are displayed as abbreviations. To select the desired language, select the abbreviation corresponding the language you want to. AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DA DZ EL EO ET EU FA FI FJ FO FY GA GD GL GN GU HA HI HR HU HY IA IE EN XV-M565BK[U....]APPENDIX/3 Afar Abkhazian Afrikaans Ameharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish Bhutani Greek Esperanto Estonian Basque Persian Finnish Fiji Faroese Frisian Irish Scots Gaelic Galician Guarani Gujarati Hausa Hindi Croatian Hungarian Armenian Interlingua Interlingue 54 IK IN IS IW JI JW KA KK KL KM KN KO KS KU KY LA LN LO LT LV MG MI MK ML MN MO MR MS MT MY NA NE NL NO OC OM OR PA PL PS PT QU RM Inupiak Indonesian Icelandic Hebrew Yiddish Javanese Georgian Kazakh Greenlandic Cambodian Kannada Korean (KOR) Kashmiri Kurdish Kirghiz Latin Lingala Laothian Lithuanian Latvian, Lettish Malagasy Maori Macedonian Malayalam Mongolian Moldavian Marathi Malay (MAY) Maltese Burmese Nauru Nepali Dutch Norwegian Occitan (Afan) Oromo Oriya Panjabi Polish Pashto, Pushto Portuguese Quechua Rhaeto-Romance RN RO RU RW SA SD SG SH SI SK SL SM SN SO SQ SR SS ST SU SV SW TA TE TG TH TI TK TL TN TO TR TS TT TW UK UR UZ VI VO WO XH YO ZU 7/4/00, 3:55 PM Kirundi Rumanian Russian Kinyarwanda Sanskrit Sindhi Sangho Serbo-Croatian Singhalese Slovak Slovenian Samoan Shona Somali Albanian Serbian Siswati Sesotho Sundanese Swedish Swahili Tamil Telugu Tajik Thai Tigrinya Turkmen Tagalog Setswana Tonga Turkish Tsonga Tatar Twi Ukrainian Urdu Uzbek Vietnamese Volapuk Wolof Xhosa Yoruba Zulu XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A Appendix B: Country code list for parental lock This list is used for the parental Lock operation. For details, see page 47. AD Andorra CM Cameroon GR Greece AE United Arab Emirates CN China GS AF Afghanistan CO Colombia AG Antigua and Barbuda CR Costa Rica GT Guatemala AI Anguilla CU Cuba GU Guam AL Albania CV Cape Verde GW Guinea-Bissau AM Armenia CX Christmas Island GY Guyana AN Netherlands Antilles CY Cyprus HK Hong Kong AO Angola CZ Czech Republic HM Heard Island and AQ Antarctica DE Germany AR Argentina DJ Djibouti HN Honduras AS American Samoa DK Denmark HR Croatia AT Austria DM Dominica HT Haiti AU Australia DO Dominican Republic HU Hungary AW Aruba DZ Algeria ID Indonesia AZ Azerbaijan EC Ecuador IE Ireland BA Bosnia and Herzegovina EE Estonia IL Israel BB Barbados EG Egypt IN India BD Bangladesh EH Western Sahara IO British Indian Ocean BE Belgium ER Eritrea BF Burkina Faso ES Spain IQ Iraq BG Bulgaria ET Ethiopia IR Iran (Islamic Republic of) BH Bahrain FI Finland IS Iceland BI Burundi FJ Fiji IT Italy BJ Benin FK Falkland Islands JM Jamaica BM Bermuda (Malvinas) JO Jordan BN Brunei Darussalam FM Micronesia JP Japan South Georgia and the South Sandwich Islands McDonald Islands Territory BO Bolivia (Federated States of) KE Kenya BR Brazil FO Faroe Islands KG Kyrgyzstan BS Bahamas FR France KH Cambodia BT Bhutan FX France, Metropolitan KI Kiribati BV Bouvet Island GA Gabon KM Comoros BW Botswana GB United Kingdom KN Saint Kitts and Nevis BY Belarus GD Grenada KP BZ Belize GE Georgia CA Canada GF French Guiana KR Korea, Republic of CC Cocos (Keeling) Islands GH Ghana KW Kuwait CF Central African Republic GI Gibraltar KY Cayman Islands CG Congo GL Greenland KZ Kazakhstan CH Switzerland GM Gambia LA CI Côte d’Ivoire GN Guinea CK Cook Islands GP Guadeloupe LB Lebanon CL Chile GQ Equatorial Guinea LC Saint Lucia EN XV-M565BK[U....]APPENDIX/3 55 Korea, Democratic People’s Republic of Lao People’s Democratic Republic 7/4/00, 3:55 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521-013A LI Liechtenstein PE Peru TJ LK Sri Lanka LR Liberia LS LT LU Luxembourg LV Latvia Tajikistan PF French Polynesia TK Tokelau PG Papua New Guinea TM Turkmenistan Lesotho PH Philippines TN Tunisia Lithuania PK Pakistan TO Tonga PL Poland TP East Timor PM Saint Pierre and TR Turkey Miquelon TT Trinidad and Tobago Pitcairn TV Tuvalu TW Taiwan, Province of LY Libyan Arab Jamahiriya MA Morocco PN MC Monaco PR Puerto Rico MD Moldova, Republic of PT Portugal MG Madagascar PW Palau MH Marshall Islands PY Paraguay ML Mali QA Qatar UA Ukraine MM Myanmar RE Réunion UG Uganda MN Mongolia RO Romania UM United States Minor MO Macau RU Russian Federation MP Northern Mariana RW Rwanda US United States Islands SA Saudi Arabia UY Uruguay MQ Martinique SB Solomon Islands UZ Uzbekistan MR Mauritania SC Seychelles VA Vatican City State MS Montserrat SD Sudan MT Malta SE Sweden MU Mauritius SG Singapore MV Maldives SH MW Malawi MX Mexico MY MZ China TZ Tanzania, United Republic of Outlying Islands (Holy See) VC Saint Vincent and the Saint Helena VE Venezuela SI Slovenia VG Virgin Islands (British) SJ Svalbard and Jan Mayen VI Virgin Islands (U.S.) Malaysia SK Slovakia VN Vietnam Mozambique SL Sierra Leone VU Vanuatu NA Namibia SM San Marino WF NC New Caledonia SN Senegal NE Niger SO Somalia WS Samoa NF Norfolk Island SR Suriname YE Yemen NG Nigeria ST Sao Tome and Principe YT Mayotte NI Nicaragua SV El Salvador YU Yugoslavia NL Netherlands SY Syrian Arab Republic ZA South Africa NO Norway SZ Swaziland ZM Zambia NP Nepal TC Turks and Caicos Islands ZR Zaire NR Nauru TD Chad ZW Zimbabwe NU Niue TF NZ New Zealand OM Oman TG Togo PA Panama TH Thailand EN XV-M565BK[U....]APPENDIX/3 56 Grenadines Wallis and Futuna Islands French Southern Territories 7/4/00, 3:55 PM XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN LVT0521 -013A VICTOR COMPANY OF JAPAN, LIMITED V J EN. XV-M565BK[U....]COVER/3 2 7/4/00, 4:36 PM C 0700RIMUBNJEM