Download HP E5000 Administrator's Guide

SHOW DATE
Syntax
SHOW DATE
Description
Displays the current date, time, and time zone settings of the internal Real Time Clock of the
Enclosure Manager.
Restrictions
None
SHOW DEVICE SERIAL_NUMBER BLADE
Syntax
SHOW DEVICE SERIAL_NUMBER BLADE <bay#>
Description
Displays the serial number of the blade specified by the bay <bay#>.
Restrictions
Can be used only when the enclosure power is on, the blade is present, and iLO is communicating
with the EMU properly. If the enclosure power is off, the EMU has no signal from the blade to
determine whether it is present, and iLO in the blade has no power to report its serial number. The
EM reports “[Unknown]” if this command is used with the enclosure power off.
SHOW DISPLAY EVENTS
Syntax
SHOW DISPLAY EVENTS
Description
Displays the current status of the display event setting.
Restrictions
None
SHOW EM
Syntax
SHOW EM INFO
Description
Displays information about the Enclosure Manager.
NOTE: Hardware versions are A, B, C, and so forth. Aux info includes the change management
SVN number and the health monitor PSoC firmware version number. Both are needed occasionally
in lab testing environments. In production environments, the HM version may sometimes be needed,
and this command is the only way to find it in EM firmware 1.0 or later.
Inventory and status
143