Download HP E5000 Administrator's Guide

Transcript
Error
Code Description
Resolution
1576 Unhandled exception on the Alert Emails
configuration page
See the error message for details. Contact HP support and
provide these details.
1577 Error saving Alert Emails information
The information was not successfully written to the file specified
in the error message. Retry the operation. If the operation
continues to fail contact HP support and provide these details.
1578 Error copying or removing Alert Emails
information
The file specified in the error message failed to be deleted or
overwritten by a newer version. Retry the operation. If the
operation continues to fail contact HP support and provide these
details.
1579 Error sending a test email
There was a problem successfully sending a test email to the
address specified. If Exchange has not been deployed on this
server and the email address specified does not yet exist this
operation will fail. Retry the operation after Exchange has been
deployed via the Alert Emails snap-in in Server Manager.
1580 Not used
1581 Not used
1582 Not used
1583 Error finding provisioning file
A valid provisioning file was not returned. Verify that HP CMP
is installed and that the Service HP CMP is started.
1584 Error attempting to remove local Raid0 LUN
The requested operation to remove the local Raid0 Recovery
LUN was unsuccessful. If a retry fails please contact HP support
and provide these details.
1585 Error attempting to remove Server blade 2's
Raid0 LUN
The requested operation to remove the local Raid0 Recovery
LUN was unsuccessful. If a retry fails please contact HP support
and provide these details.
System Manager
Error Description
Code
Resolution
257
The EM key has not been generated yet.
Run the E5000 Configuration Wizard to completion.
258
Exchange related WMI query failed.
Verify that Exchange is installed and running via the Exchange
Management Console, located in Programs\Microsoft Exchange
Server 2010\Exchange Management Console.
259
Query for serial number failed
Verify that there is communication with the EMU.
260
Service Registry Key not Found. Possible
re-purposing of the server.
Verify that the E5000 System Validation Service is installed and
running.
261
(Warning) High-level WMI Enclosure queries
fail. Possible EM provider issue.
Call HP Support.
262
Class specific enclosure queries fail. Could be Call HP Support.
timing or problem with specific class.
263
(Warning) High-level WMI System queries fail. Check the SMH for Hardware status and, if the components are
Possible System provider issue
missing, verify that the WEBM Providers are installed.
264
Class specific system query failed. Could be
timing or problem with specific class.
Check the SMH and verify that all hardware components are
reporting a status. Any missing components could be offline or
failing.
265
(Warning) High-level WMI Storage queries
fail. Possible System provider issue
Call HP Support.
166 E5000 Error Codes