Download HP 8591C User's Manual

-I
IUsing Spectrum Analyzer Features
Saving and Recalling Data from the Memory Card
To Enter a Prefix
Memory card data can be stored and recalled using a prefix. To enter a prefix,
press @i’ZFLFj or (CONFIG_), Change Prefix .
Pressing Change Prefix accesses a menu containing the letters of the
alphabet, the underscore symbol (-), the number symbol (#), a space, and the
clear function. To select a character, press the softkey that displays the group
of characters that contains the desired character. The softkey menu changes
to allow you to select an individual character. If you make a mistake, press
(-1 to space back over the incorrect character. Additional characters are
available by pressing Nore i of 2 . Numbers may be selected with the
numeric keypad.
The prefix can be from one to seven characters long. The longer the prefix,
the shorter the register number must be. The total length of the prefix and
register number cannot exceed eight characters. The prefix can be any
character; however, the underscore should not be the Erst character of the
prefix.
An existing preEx can be cleared with the clear function. Press [CONFIGI) or
(jiIspLAy), Change Prefix , YZ,# Spc Clear , then Clear to clear the
current preEx. To change a preEx, clear the existing preEx and then enter a
new preEx.
3-19