Download Graco 3A1697A User's Manual

Parts
RoadLazer™ RoadPak™
Line Striping System
3A1697A
ENG
- For the Application of Road Marking and Reflective Coatings - For Professional Use Only Important Safety Instructions
For complete warnings and safety instructions see RoadLazer™
RoadPak™ Line Striper System manual. Save these instructions.
ti15835a
Contents
Contents
Pump Assembly
Bead Tank Assembly
RoadLazer RoadPak Module
24G624, 24G625
Page 4
Page 8
Engine and Compressor
Assembly
ti16963a
Hydraulic Pump
Assembly
Page 10
2
Page 12
3A1697A
Contents
Contents
Adjustable Gun Arm Beam 24G630
Pointer System 24G634
Page 18
Page 14
Single Hitch Mounting Frame 24G626 / Slide-in Mounting Frame 24G627
RoadPak Gun Arm
24G628 / 24G629
Page 15
Page 16
ti16964a
3A1697A
3
Parts - RoadPak 24G625, 24G624
Parts - RoadPak 24G625, 24G624
227
226
221
230
291
5
2
233
225
222
270
15
28
231
1
80
299
232
224
See page 6
272
223
34
240
224
298
142
245
297
52
51
244
243
242
50
274
268
246 241
242
273
ti16965a
4
3A1697A
Parts - RoadPak 24G625, 24G624
Parts List - RoadPak 24G625, 24G624
Ref.
1
Part
Description
Qty.
112774 SCREW, mach, sltd hex wash hd
4
(Model 24G625)
112774 SCREW, mach, sltd hex wash hd
2
(Model 24G624)
2
108851 WASHER, plain
8
5
101566 NUT, lock
8
15
102040 NUT, lock, hex
4
28
516595 BOLT, hex hd, 3/8 x 2.5
8
34
110982 SCREW, cap, hex hd
4
(Model 24G625)
110982 SCREW, cap, hex hd
2
(Model 24G624)
50
16H585 SHIELD, pump (Model 24G625)
2
16H585 SHIELD, pump (Model 24G624)
1
51
111235 SCREW, mach, pnh
2
(Model 24G625)
111235 SCREW, mach, pnh
1
(Model 24G624)
52
120317 NUT, wing (Model 24G625)
2
120317 NUT, wing (Model 24G624)
1
80
120226 SCREW, hex hd, flange
8
142 16G034 HOSE, coupled
1
221 16G784 PLATE, pump mounting, painted
1
222 16G414 BRACKET, ball valve
2
(Model 24G625)
16G414 BRACKET, ball valve
1
(Model 24G624)
223 120140 VALVE, ball, assembly
2
(Model 24G625)
120140 VALVE, ball, assembly
1
(Model 24G624)
224 120304 FITTING, nipple, straight
4
(Model 24G625)
120304 FITTING, nipple, straight
2
(Model 24G624)
225† 24G767 PUMP, RPS 2900 (Model 24G625)
2
24G767 PUMP, RPS 2900 (Model 24G624)
1
226 15G783 HOSE, coupled (Model 24G625)
2
15G783 HOSE, coupled (Model 24G624)
1
227 16G037 HOSE, coupled (Model 24G625)
2
16G037 HOSE, coupled (Model 24G624)
1
230 16G421 BRACKET, sensor (Model 24G625)
2
16G421 BRACKET, sensor (Model 24G624)
1
231 16J511 SENSOR, gallon counter
2
(Model 24G625)
16J511 SENSOR, gallon counter
1
(Model 24G624)
232 237686 WIRE, ground assembly w/ clamp
1
3A1697A
Ref.
233
240
Part
Description
Qty.
100985 WASHER, lock ext
1
24G986 FILTER, assembly, RPS 2900
2
(Model 24G625)
24G986 FILTER, assembly, RPS 2900
1
(Model 24G624)
241 124490 FITTING, tee, street
2
(Model 24G625)
124490 FITTING, tee, street
1
(Model 24G624)
242 207123 UNION, swivel, 90 deg
3
(Model 24G625)
207123 UNION, swivel, 90 deg
2
(Model 24G624)
243 16F255 FITTING, nipple, rdcg, 1/2 x 3/8 npt
3
(Model 24G625)
16F255 FITTING, nipple, rdcg, 1/2 x 3/8 npt
2
(Model 24G624)
244 168160 BUSHING, pipe (Model 24G625)
2
168160 BUSHING, pipe (Model 24G624)
1
245 102814 GAUGE, press, fluid
2
(Model 24G625)
102814 GAUGE, press, fluid
1
(Model 24G624)
246 124489 PLUG, pipe (Model 24G625)
1
268 245798 HOSE, cpld, 1/4 in. x 7 ft
2
(Model 24G625)
245798 HOSE, cpld, 1/4 in. x 7 ft
1
(Model 24G624)
270 16G707 TUBE, drain (Model 24G625)
2
16G707 TUBE, drain (Model 24G624)
1
272 24G726 HOSE, suction (Model 24G625)
2
24G726 HOSE, suction (Model 24G624)
1
273 16G692 STRAINER, inlet (Model 24G625)
2
16G692 STRAINER, inlet (Model 24G624)
1
274 125320 SCREW, mach, phillips, rnd hd
4
(Model 24G625)
125320 SCREW, mach, phillips, rnd hd
2
(Model 24G624)
▲291 16H057 LABEL, warning, multiple
1
297 15D008 BOLT, 3/8-16, 316 sst
1
298 260384 ADAPTER, bung, machining
1
299 16J716 PLUG, 3/4 drum, with hole
1
† Refer to manual 3A1303 for individual parts list.
▲ Replacement Danger and Warning labels, tags, and
cards are available at no cost.
5
Parts - Filter Assembly 24G986
Parts - Filter Assembly 24G986
240A
240C
240B
240D
240E
240K
240M
240N
240F
240V
240R
240G
240U
240H
ti16995a
240P
240S
6
3A1697A
Parts - Filter Assembly 24G986
Parts List - Filter Assembly 24G986
Ref.
240A
240B
240C
240D
240E
240F
240G
240H
Part
15C765
117285
15C766
244071
15G649
124488
16F255
16F254
3A1697A
Description
Qty.
CAP, filter
1
PACKING, o-ring
1
TUBE, diffusion
1
FILTER, 30 mesh, ultra
1
BASE, filter
1
BUSHING, pipe
2
FITTING, nipple, rdcg, 1/2 x 3/8 npt 1
FITTING, nipple, rdcg 5/8 x 1/4 npt
1
Ref.
240K
240M
240N
240P
240R
240S
240U
240V
Part
287968
193710
193709
287879
114708
15G563
116424
114797
Description
Qty.
FITTING, union adapter
1
SEAL, seat, valve
1
SEAT, valve
1
VALVE, drain, assy (includes 240V) 1
SPRING, compression
1
HANDLE, valve
1
NUT, cap
1
GASKET
1
7
Parts - RoadPak 24G625, 24G624 (continuted)
Parts - RoadPak 24G625, 24G624 (continuted)
55
277
278
183
190
198
192
182
193
194
191
289
204
184
196
189
195
188
153
30
29
197
196
203
27
2
185
186
187
28
181
29
31
ti16966a
27
8
2
5
3A1697A
Parts - RoadPak 24G625, 24G624 (continuted)
Parts List - RoadPak 24G625, 24G624 (continued)
Ref.
2
5
27
28
29
30
31
55
153
181
182
183
184
185
186
187
Part
108851
101566
116935
516595
109570
100017
801020
16J471
162453
16G777
24F496
157785
113292
191222
104663
111834
3A1697A
Description
Qty.
WASHER, plain
13
NUT, lock
8
CAPSCREW
4
BOLT
4
WASHER, plain
8
SCREW, cap, hex hd
4
NUT, lock, hex
4
GROMMET
2
FITTING, (1/4 npsm x 1/4 npt)
1
PLATE, mount, bead tank, painted
1
TANK, bead, 36 gal., painted
1
FITTING, swivel
1
VALVE, ball, 3 way
1
FITTING
1
PLUG, pipe
2
NIPPLE, pipe, hex
2
Ref.
188
189
190
191
192
193
194
195
196
197
198
203
204
277
278
289
Part
157191
158683
113291
108124
159239
166999
113319
164259
100840
100030
104655
16H355
191643
24J348
119771
16H060
Description
Qty.
FITTING, adapter (1/2 npt x 3/4 npt) 1
FITTING, elbow, 90 deg
1
REGULATOR, air
1
VALVE, safety, 75 psi
1
FITTING, nipple, pipe, rdcg
1
FITTING, elbow, street
1
FITTING, air
1
FITTING, elbow, street
1
FITTING, elbow, street
2
BUSHING
1
GAUGE, press air
1
TUBE, drain
1
HOSE, air, 3/8
1
COVER, bead tank
1
STRAP, cover
2
LABEL, pressure on off
1
9
Parts - RoadPak 24G625, 24G624 (continued)
Parts - RoadPak 24G625, 24G624 (continued)
202
17
12
32
33
108
112
2
111
40
15
146
153
168
287
149
148
41
147
150
154
151
169
166
288
152
1
40
115 95
129
100
116
167
127
152
159
205
169
39
22
101
138
13
98
17
18
2
145
5
15
40
102
276
99
275
1
12
81
7
8
3
24
23
39
1
1
285
271
96
2
3
82
97
103
11
83
90
88
21
5
20
19
84
85
4
ti16962a
10
3A1697A
Parts - RoadPak 24G625, 24G624 (continued)
Parts List - RoadPak 24G625, 24G624 (continued)
Ref.
1
2
3
4
5
7
8
11
12
13
15
17
18
19
20
21
22
Part
112774
108851
111803
100132
101566
100731
100133
110963
111193
112958
102040
102040
100527
111040
125070
100052
114246
105171
105171
23
24
32
33
39
41
81
82
83
84
85
88
90
95
113491
125220
108481
100450
110755
110755
159346
159346
104765
24G715
16G572
124935
605358
16G406
119971
125073
24J517
96
15G812
40
3A1697A
Description
Qty.
SCREW, mach, sltd hex wash hd
11
WASHER, plain
8
SCREW, cap, hex hd
5
WASHER, flat
1
NUT, lock
8
WASHER
1
WASHER, lock, 3/8
1
SCREW, cap, flange head
4
SCREW, cap, flange head
6
NUT, hex, flanged
2
NUT, lock, hex (Model 24G625)
6
NUT, lock, hex (Model 24G624)
4
WASHER, plain
8
NUT, lock, insert, nylock, 5/16
4
SCREW, cap, hex head
1
WASHER, lock
1
SCREW, set
1
SCREW, cap, hex, 1/4 x 2.25
4
(Model 24G625)
SCREW, cap, hex, 1/4 x 2.25
2
(Model 24G624)
CLAMP, wire
1
CLAMP. cushion, support, type, loop 1
SCREW, cap, hex hd
2
SCREW, cap, hex hd
2
WASHER, plain (Model 24G625)
7
WASHER, plain (Model 24G624)
5
WASHER (Model 24G625)
4
WASHER (Model 24G624)
2
PLUG, pipe headles
1
FRAME, weldment, Powerpak
1
SUPPORT, cooler, left, painted
1
ENGINE, gasoline, 18 HP Kohler
1
KEY, sprocket
1
PULLEY, drive
1
FAN
1
CABLE, elec., battery, positive
1
KIT, pump, hydraulic (includes 276,
1
275, 99, 98, 12, 13)
PULLEY, pump
1
Ref.
97
98
99
100
101
102
103
108
111
112
115
116
127
129
138
Part
100002
15G767
15B438
16E739
124880
124926
120172
24H322
16G830
187797
124941
124942
120066
124770
125005
125005
145 24H284
146 24G416
147 158491
148 112795
149 113286
150 155470
151 106228
152 156971
153 162453
154 208536
159 15B565
166 104984
167 118457
168 100509
169 115841
202 206966
205 125276
275 117560
276 15A464
285 16G703
▲287 189285
▲288 16C394
Description
Qty.
SCREW, set, sch
2
COLLAR, locking, pressure knob
1
KNOB, pressure
1
PUMP, compressor, air
1
PULLEY, idler, a section belt
1
BELT, v, a section
1
BELT, poly-v
1
COVER, belt, assy, painted
1
COVER, belt, air compressor, paint
1
SPACER, duct
1
FITTING, long elbow, hydraulic
1
FITTING, elbow, hydraulic
1
FITTING, elbow, hudraulic
1
FITTING, tee, 1/2 jic, swivel
1
(Model 24G625)
2
(Model 24G624)
1
HOSE, coupled, PTFE
1
TANK, air, assembly
1
FITTING, nipple
1
REGULATOR, unloader
1
VALVE, safety, 150 psi
1
FITTING, swivel, union, 90 degree
1
FITTING, tee, street
2
FITTING, nipple, short
2
FITTING, (1/4 npsm x 1/4 npt)
1
COUPLER, line, air
1
VALVE, ball
1
FITTING, tee, pipe
1
GAUGE, panel, mount
1
PLUG, pipe
1
FITTING, elbow
2
HOSE, coupled
1
HOSE, air, 3/8
1
SCREW, set, socket head
1
LABEL, control
1
LABEL, Roadlazer, Roadpak, side
1
LABEL, caution
1
LABEL, iso pinch hazard icon
12
▲ Replacement Danger and Warning labels, tags, and
cards are available at no cost.
11
Parts - RoadPak 24G625, 24G624 (continued)
Parts - RoadPak 24G625, 24G624 (continued)
39
1
126K
179
126J
37
38
91
15
23
39
126F
157
178
92
156
126M
126G
39
158
40
126H
35
36
126N
126P
126A
126B
1
143
39
22
285
138
126E
107
126C
1
39
126D
104
15
287
155
227
14
18
262
261
17
131
32
26
17
25
39
39
126
18
1
260
105
292
293
292
106
26
18
130
17
16
25
109
17
110
140
141
130A
130B
250
130C
25
252
251
250
252
12
ti16967a
3A1697A
Parts - RoadPak 24G625, 24G624 (continued)
Parts List - RoadPak 24G625, 24G624 (continued)
Ref.
1
14
15
16
17
18
22
23
25
26
32
35
36
37
38
39
40
91
92
104
105
106
107
109
110
126
126A
126B
126C
126D
126E
126F
126G
126H
126J
Part
112774
100022
102040
100521
100527
111040
105171
113491
C20474
120339
108481
100016
100015
120463
111714
110755
159346
801958
801959
16G576
16G574
16G578
16G580
287925
15H480
24G984
15G545
120064
120137
124769
100737
15H247
120315
120310
15H246
3A1697A
Description
Qty.
SCREW, mach, sltd hex wash hd
8
SCREW, cap, hex hd
4
NUT, lock, hex
13
SCREW, cap hed hd
2
WASHER, plain
12
NUT, lock, insert, nylock, 5/16
8
SCREW, cap, hex, 1/4 x 2 1/4
3
CLAMP, wire
1
SCREW, self-tapping
12
WASHER, fender
8
SCREW, cap, hex hd
2
WASHER, lock
2
NUT, hex mscr
2
SCREW, mach, fill hd
2
SCREW, mach, pnh
4
WASHER, plain
17
WASHER
3
PROTECTOR, terminal, red
1
TERMINAL, protector, black
1
COVER, fan, top, painted
1
SUPPORT, cooler, right, painted
1
SUPPORT, cooler, front, painted
1
COVER, belt, lower, painted
1
COOLER, oil
1
BAR, support
1
RESERVOIR, hydraulic, RPS 2900 1
RESERVOIR, painted
1
FITTING, elbow, hydraulic
1
FITTING, suction
1
FITTING, elbow, male, 1 jic x 1 sae 1
PLUG, pipe
1
CAP, filter, hydraulic
1
O-RING, packing
1
FILTER, hydraulic fluid
1
HOUSING
1
Ref.
Part
126K 124768
126M 116915
▲126N 189285
126P 198585
130
24H257
130A
130B
130C
131
138
140
141
143
155
156
157
158
178
179
16G721
16G720
16G754
16G778
125005
16G033
16G038
16G035
801972
115753
107069
803525
24F922
24H360
227
250
251
252
260
261
262
285
▲287
292
293
16G037
16G756
16G710
16G758
16G722
16H081
16H082
16G703
189285
16G757
16G162
Description
Qty.
FITTING, tee, 3/4 jic x 3/4 sae
1
CAP, breather filler
1
LABEL, caution
1
LABEL, hydraulic fluid
1
KIT, install, 6 gal fuel tank
1
(includes 130A, 130B, 130C)
CAP, 3.5 in. carb compliant, gas
1
TUBE, pickup, 6 gallon tank
1
GROMMET, FKM
1
BRACKET, mounting, fuel tank
2
CLAMP, hose, cushion, 7/8 ID
2
HOSE, coupled
2
HOSE, coupled
1
HOSE, coupled
1
PAD, battery
1
BATTERY, 33 AH, sealed
1
CLAMP, battery
1
BOLT, battery
2
BOARD, innerconnect
1
JUNCTION BOX, Roadpak sys1
tem, painted
HOSE, coupled
2
STRAP, cartridge, mounting
2
CATRIDGE, fuel vapor, carbon
1
BRACKET, cartidge, mount
2
HOSE, 1/4 in. low perm, 3 ft
1
HOSE, 3/16 in. low perm, 15 in.
1
HOSE, 1/4 in. low perm, 2 ft
1
LABEL, Roadlazer, Roadpak, side
2
LABEL, caution
2
CLAMP, hose, 1/4 in.
4
CLAMP, hose, 3/16 in.
2
▲ Replacement Danger and Warning labels, tags, and
cards are available at no cost.
13
Parts - Pointer System 24G634
Parts - Pointer System 24G634
353
358
355
361
360
354
359
356
351
357
363
362
352
354
ti16420a
Parts List - Pointer System 24G634
Ref.
351
352
353
354
355
356
357
358
359
360
361
362
363
14
Part
191692
24F989
224136
111145
191691
191694
105431
101566
100017
109570
801020
195202
115479
Description
BRACKET, support
ARM, extention, guide
CLAMP, extension
KNOB, pronged
BRACKET, mount
BAR, lock
SCREW, manifold
NUT, lock
SCREW, cap, hex HD
WASHER, plain
NUT, lock, hex
ROD, indicator
FASTENER, w/chain
Qty.
1
1
2
3
2
2
4
4
2
2
2
1
1
3A1697A
Parts - Slide-in Mounting Frame 24G627 Single Hitch Mounting Frame 24G626
Parts - Slide-in Mounting Frame 24G627
Single Hitch Mounting Frame 24G626
24G627 Only
304
317
307
316
303
318
315
320
312
321
ti16928a
313
308
302
311
315
307
307
319
314
315
322
306
310
307
326
301
305
328
323
312
309
308
307
315
312
24G626 Only
327
325 324
Parts List - Slide-in Mounting Frame 24G627
Single Hitch Mounting Frame 24G626
Ref.
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
Part
Description
Qty.
238301 BRACKET, guide
1
24G982 BRACKET, mounting, arm, gun,
1
painted
24G981 BRACKET, hitch, arm, gun, painted 1
24F991 EXTENSION, frame (24G627 only)
2
100454 SCREW, cap hex HD
4
101566 NUT, lock
4
109570 WASHER, plain
52
111040 NUT, lock, insert, nylock, 5/16
3
113304 CLAMP, cam over
2
113451 WASHER, wave
2
113467 SCREW, cap, socket HD
2
124869 SCREW, cap, hex HD
16
186812 CHAIN, ground 3.5 HP
1
191099 CLAMP, wedge
2
801020 NUT, lock, hex
26
16G056 BRACE, L-bracket, painted
4
(24G627 only)
3A1697A
Ref.
317
318
319
320
321
322
323
324
325
326
327
328
Part
Description
115211 SCREW, cap, hex HD
(24G627 only)
100017 SCREW, cap, hex HD
(24G627 only)
100023 WASHER, flat
M71635 CLAMP, hose
115473 PIN, hitch
802277 SCREW, machine
24F497 ROD, tensioner (24G626 only)
110947 WASHER, plain (24G626 only)
101015 WASHER, lock (24G626 only)
C19187 NUT, nex (24G626 only)
125060 RECEIVER, hitch pin and clip
(24G626 only)
24G840 INSERT, hitch, Roadpak, painted
(24G626 only)
Qty.
2
8
4
1
1
1
1
1
1
1
1
1
15
Parts - Gun Arm 24G628, 24G629
Parts - Gun Arm 24G628, 24G629
575
501
573
578
576
577
574
510
506
513
510
553
507
508
579
509
555
554
530
509
505
590
515
502 584
514
519
527
504
582
585
591
544
586
526 536
581
523
571
562
547
543
528
522
568
558
504
552
562
542
570
572
503
548
535
592
537
512
566
560
538
583
510
539
567
548
550
518
549
522
541
503
559
597
588
521
531
534
504
524
532 546
533
589
552
520
503
569
556
525
529
561
16
503
569
ti16970a
3A1697A
Parts - Gun Arm 24G628, 24G629
Parts List - Gun Arm 24G628, 24G629
Ref.
501
502
503
504
505
506
507
508
509
510
512
513
514
515
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
Part
113304
123885
260212
112405
113454
24F984
113600
238321
100023
111040
24F987
100450
191264
113664
102040
16G051
16G057
16G052
113491
103547
15E943
101147
109570
801020
24F985
111834
191164
207123
207123
534
535
536
537
538
539
24G979
191163
24H015
100133
191191
24F607
24F607
541
542
543
544
546
547
24G980
191218
16G049
802277
101748
101748
113453
3A1697A
Description
Qty.
CLAMP, cam over
1
SWITCH, safety
1
SCREW, hex washer hd, thd form
6
NUT, lock
4
BUSHING, oilite
4
BRACKET, traverse
1
SHOCK, gas
1
ARM, wishbone
2
WASHER, flat
6
NUT, lock, insert, nylock, 5/16
5
BEAM, boom
1
SCREW, cap hex HD
1
SPACER, gas, spring
2
SCREW, cap, hex HD
1
NUT, lock, hex
1
COVER, solenoid
1
COVER, sprocket
1
SHIELD, sensor
1
CLAMP, wire
3
SCREW, mach, hex HD
1
SENSOR, distance
1
GEAR, signal
1
SCREW, cap, hex HD
2
WASHER, plain
4
NUT, lock, hex
2
RING, sensor gear
1
BRACKET, stowing
1
NIPPLE, pipe ,hex
2
ARM, mtg, gun
4
UNION, swivel, 90 deg
3
(Model 24G629)
UNION, swivel, 90 deg
2
(Model 24G628)
GUN, spray, bead
2
ARM, pivot, gun
2
BRACKET, mounting, solenoid
1
WASHER, lock, 3/8
8
HOSE, air
8
VALVE, ball, 3/8 NPT, e-nickel PLT
3
(Model 24G629)
VALVE, ball, 3/8 NPT, e-nickel PLT
2
(Model 24G628)
GUN, spray, auto
2
CLAMP, support, arm
4
VALVE, air solenoid
1
SCREW, machine
2
PLUG, pipe SST(Model 24G629)
2
PLUG, pipe SST(Model 24G628)
1
CAP, dust
1
Ref.
548
549
550
552
553
554
555
556
Part
113485
191102
113484
112825
113451
113467
191114
24J541
558
559
560
114271
24F988
124884
124884
561
562
566
567
568
569
570
571
572
573
574
575
576
577
578
579
581
582
583
584
585
586
588
589
▲590
591
592
113471
178861
100101
113695
16G833
193658
16G812
100454
116940
194491
114986
114987
113326
113598
191112
101566
113161
124983
116969
16G161
100079
121939
16G167
LL5339
16H058
16H460
125220
597
116287
Description
Qty.
BEARING, cup/cone
2
COLLAR, stop
1
SEAL, grease
1
SPRING, belleville
9
WASHER, wave
2
SCREW, cap, socket HD
1
CLAMP, retaining
1
WHEEL, pneumatic
1
(includes 525, 529)
STRAP, retaining
7
FORK, caster
1
HOSE, coupled, 3/8 in. X 20 ft
3
(Model 24G629)
HOSE, coupled, 3/8 in. X 20 ft
2
(Model 24G628)
SCREW, cap, hex HD
1
PAD, foam
2
SCREW, cap, hex HD
8
CLAMP, hose
2
HOSE, air
1
SPACER, seal
2
JACKET, scuff, 15 ft
1
SCREW, cap hex HD
2
SCREW, cap, sh, 5/16-18
4
SPACER
8
BOLT, shoulder, sch
4
NUT, lock
4
BEARING
4
RING, retaining, internal
4
WHEEL, traverse
4
NUT, lock
2
SCREW, flange, hex HD
4
SCREW, cap, sch, 10-24 X 3.75
2
NUT, lock
2
CABLE, control
1
WASHER, lock, spring
2
SCREW, plastite, #8 hex wash HD
2
HOSE, bead, 3/4 in., clear
2
TIP, spray, RAC 5, striping
2
LABEL, injection hazard iso symb
1
SLEEVE, durawrap velcro
1
CLAMP, cushion, support, type,
1
loop
WASHER, SST, external, star1
washer
▲ Replacement Danger and Warning labels, tags, and
cards are available at no cost.
17
Parts - Gun Arm Beam 24G630
Parts - Gun Arm Beam 24G630
703
701
709
704
706
705
708
707
702
ti16970a
Parts List - Gun Arm Beam 24G630
Ref.
701
702
703
704
705
706
707
708
709
18
Part
24G842
113682
290159
191089
100469
125205
108450
160641
16F422
Description
BEAM, gun arm, adjustable
PLUG, tubing
LABEL, reflective
HANDLE, beam
SCREW, cap, hex HD
NUT, lock, nylon, 3/8-16
PIN, cotter
WASHER, packing
GRIP, handle
Qty.
1
2
2
2
2
2
2
2
2
3A1697A
Notes
Notes
3A1697A
19
Graco Standard Warranty
Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in
material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty
published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by
Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written
recommendations.
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty
installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of
non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with
structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or
maintenance of structures, accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of
the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned
to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will
be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy
(including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or
consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale.
GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT
MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to
the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these
warranties.
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or
the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the
negligence of Graco, or otherwise.
FOR GRACO CANADA CUSTOMERS
The Parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into,
given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu que la
rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés, à la suite
de ou en rapport, directement ou indirectement, avec les procédures concernées.
Graco Information
For the latest information about Graco products, visit www.graco.com.
TO PLACE AN ORDER, contact your Graco distributor or call 1-800-690-2894 to identify the nearest distributor.
All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
Original instructions. This manual contains English. MM 3A1697
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1441
Copyright 2010, Graco Inc. is registered to ISO 9001
www.graco.com
Revision A, 03/2011