Download Graco 313296J User's Manual

Technical Data
Technical Data
Max air input pressure (supply system)
D60 - 3 in. dual post, 5 gal. (20 L), 16 gal. (60 L),
30 gal. (115 L) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
D200 - 3 in. dual post, 55 gal. (200 L) . . . . . . . . . . . .
D200s - 6.5 in. dual post, 55 gal. (200 L). . . . . . . . . .
Max fluid and air working pressure . . . . . . . . . . . . . . . . .
Wetted parts and weight (displacement pump) . . . . . . . .
Platen Codes (see page 4): Part number; Wetted parts
F: 257729, 5 gal. (20 L)
L: 257734, 8 gal. (30 L)
U: 257738, 16 gal. (60 L). . . . . . . . . . . . . . . . . . . . . .
H: 257731, 5 gal. (20 L)
R: 257736, 8 gal. (30 L)
Y: 257741, 16 gal. (60 L) . . . . . . . . . . . . . . . . . . . . . .
8: 255662, 55 gal. (200 L) . . . . . . . . . . . . . . . . . . . . .
9: 255663, 55 gal. (200 L) . . . . . . . . . . . . . . . . . . . . .
Maximum operating temperature (supply system)
Sound data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
External power supply requirements
AC power units . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
150 psi (1.0 MPa, 10 bar)
150 psi (1.0 MPa, 10 bar)
125 psi (0.9 MPa, 9 bar)
See table below.
See Check-Mate Displacement Pump manual 312375.
Stainless steel, polyurethane, PTFE coated nitrile, polyethylene, nitrile, PTFE, 303 sst, 304 sst, 316 sst,
17-4PH sst
Electroless nickel, aramind reinforced elastomer, rubber-based PSA, polyurethane, polyethylene, nitrile, zinc
plated carbon steel, buna, 1018 carbon steel, 304 sst,
316 sst, 17-4PH sst
PTFE, EPDM, PTFE coated aluminum, zinc plated
carbon steel, 316 sst
EPDM, aluminum, zinc plated
carbon steel, 316 sst
158°F (70°C)
See NXT Air Motor manual 311238.
220-250 Vac, 50/60 Hz, single phase, 57 amps full load
current
Maximum Fluid Working Pressure and Flow Rate at Full Air Pressure (100 psi)
Maximum Air Inlet
Maximum Fluid Working
Ratio Pressure psi (MPa, bar) Pressure psi (MPa, bar)
Motor
Displacement
Pump
(cc per cycle)
Flow Rate gpm (lpm)
30 cpm
60 cpm
23
100 (0.7, 7.0)
2300 (16.1, 161)
NXT2200
200
1.6 (6.0)
3.2 (12.0)
36
100 (0.7, 7.0)
3600 (25.2, 252)
NXT3400
200
1.6 (6.0)
3.2 (12.0)
68
91 (0.64, 6.4)
6200 (43.4, 434)
NXT6500
200
1.6 (6.0)
3.2 (12.0)
Weight
See the identification plate (ID) for the weight of your
supply system.
ID
ti11157a
106
313296J