1
Download Graco Inc. 150 RPX User's Manual
Transcript
Service – Adjusting the Needle on the Contractort In–line Valve 5. Turn adjusting nut 3/4 turn counterclockwise. 5/16” 3/4 turn 6. Connect fluid hose. Use a wrench to tighten. 7. Prime system. Page 9. 8. Trigger the In–line Valve and release it. The fluid should stop immediately. Trigger Release 9. Engage safety latch and try to trigger In–line Valve. NO FLUID SHOULD FLOW. If the In–line Valve fails either test, relieve pressure, disconnect hoses and readjust needle. No Fluid 34 309388
