Download GE phoenix microme|x Operating Manual

GE
Measurement & Control
GE Oil & Gas
Measurement & Control
X-ray System Upgrades
For phoenix microme|x and phoenix nanome|x inspection systems
Software
Windows® 7
Upgrade your X-ray inspection system
and benefit from
• Actual security requirements
• Easy to use interface
• Improved performance speed
x|act 9.0
2D X-ray inspection software
• Combining ease of use with
excellence in intuitive X-ray
inspection
• Advanced defect coverage
• Live CAD overlay with PAD-ID and
inspection results – at any time and
at any viewing angle
Flash! FiltersTM - image optimization
• Enables faster, more reliable failure
detection
• Automates the filtering process of
all grey scales present in each X-ray
image
• Leads to significant time savings
and defect coverage improvements
Conventional Flash! FiltersTM
GE
Measurement & Control
GE Oil & Gas
Measurement & Control
X-ray System Upgrades
For phoenix microme|x and phoenix nanome|x inspection systems
Hardware
High dynamic digital detectors
• High dynamic live imaging at fullresolution and corrections applied
• Endurance™ scintillator technology
for best image quality due to
minimized ghost image defect (lag)
• Temperature controlled for stable
offsets over longer periods,
enabling more consistent imaging
and fewer calibrations
Computed Tomography (CT)
• High contrast flat panel CT
• Offers three-dimensional images of
the interior, even of hidden parts, of
a sample for detailed failure
analysis
• High quality CT results available
within a few minutes
Contact details:
GE Sensing & Inspection Technologies GmbH
Niels-Bohr-Straße 7
31515 Wunstorf
Germany
© 2015 General Electric Company. All Rights Reserved. Specifications are subject
to change without notice. GE is a registered trademark of General Electric
Company. Other company or product names mentioned in this document may be
trademarks or registered trademarks of their respective companies, which are not
affiliated with GE.
GEIT-31211EN (01/15)
[email protected]
T + 49 5031 172 120
F + 49 5031 172 299