Download Garmin Software Version 0858.07 Cockpit Reference Guide

Appendix
Flight
Instruments
12) Turn the small FMS Knob to select the System Status Page.
EIS
13) Press the Display Database Selection Softkey to show database information
for each display (MFD1 DB, PFD1 DB). Verify the correct database cycle
information is shown for each database for each display.
AFCS
Nav/Com/
XPDR/Audio
Canceling an automatic database synchronization:
1) While synchronization is in progress, press the SYNC DBS Softkey to
disable automatic database synchronization.
2) Acknowledge the cancelation by pressing the ENT Key.
GPS Nav
Loading the Jeppesen navigation database:
Flight
Planning
NOTE: Loading the Jeppesen navigation database prior to its effective date
will result in the expiration date on the power-up screen and the effective
date on the AUX-System Status Page being displayed in yellow.
Procedures
1) Copy the new navigation database to an SD card obtained from Garmin, or
the aircraft manufacturer.
Abnormal
Operation
Additional
Features
Hazard
Avoidance
2) With the G1000 system OFF, insert the SD card containing the new
navigation database version into the top card slot of the MFD (label of SD
card facing left).
3) Turn the G1000 system ON. A prompt similar to the following illustration is
displayed:
Annun/
Alerts
Navigation Database Load Prompt
Appendix
4) Press the YES Softkey to update the navigation database in the MFD.
5) After the update completes, the display starts in normal mode.
6) Turn the G1000 system OFF and remove the SD card from the top card slot.
Index
7) Repeat steps 2 through 6 for the PFD.
90
Garmin G1000 Cockpit Reference Guide for the Beechcraft A36/G36
190-00525-03 Rev. A