Download Garmin Software Version 0424.01 Cockpit Reference Guide

SECTION 4 – MFD
Decluttering the Map
To pan the map:
The Navigation Map Page can be quickly decluttered
by repeatedly pressing the DCLTR softkey until the desired
detail is depicted. The declutter level label appears above
the DCLTR softkey. Table 8.2.1 lists the map features that
are turned off at each declutter level.
1.
Push in the joystick to display the panning
arrow.
2.
Push in and move the joystick in the general
direction of the desired destination to place
the panning arrow at the destination location. When the panning arrow is placed on an
object, the name of the object is highlighted
(even if the name wasn’t originally displayed
on the map). This feature applies to everything
displayed on the map except route lines. When
any map feature or object is selected on the
map display, features or objects are displayed
in the box located at the top of the display.
From here, the pilot can designate the waypoint as the Direct-to destination. When the
panning arrow crosses an airspace boundary,
the boundary is highlighted and airspace information is displayed at the top of the display.
3.
To remove the panning arrow and return to
the present position, push in the joystick.
NOTE: Some of the map features are automatically removed at certain zoom ranges due to the
map setup configuration for each map item.
NOTE: “SUA” listed in the table below stands
for Special Use Airspace. These are controlled
airspaces, military zones, etc.
Map Panning
Map panning moves the map beyond its current limits
without adjusting the map range. When the panning function is selected by pushing in the joystick, a panning arrow flashes on the map display. A window also appears at
the top of the map display showing the latitude/longitude
position of the pointer, the bearing and distance to the
pointer from the aircraft’s present position, and the elevation of the land at the position of the pointer. When the
panning arrow crosses an airspace boundary, the boundary is highlighted and airspace information is displayed at
the top of the display. The information includes the name
and class of airspace, the ceiling in feet expressed in Mean
Seal Level (MSL), and the floor in feet MSL.
NOTE: The airspace boundary stays highlighted
for approximately four seconds before returning
to normal shading.
Garmin G1000 Cockpit Reference Guide for Mooney M20M & M20R
55