Download Dynex 10-Sheet Quick Setup Guide

Setting up the shredder
Important safety information
1 Place the shredder head securely on the rim of the supplied wastebasket.
The shredder has a built-in safety mechanism that requires the shredder to
be correctly placed on the wastebasket. Be careful not to touch the
bottom of the shredder head to avoid touching the sharp blades.
Note: Do not use plastic bags to line the wastebasket.
2 Connect the power cord to a power outlet.
• Do not attempt to repair the shredder yourself. Repairs must be made by a
qualified technician.
• Do not alter the shredder or power cord in any way.
• Do not use the shredder if it or the power cord appears damaged in any way.
• Always unplug the power cord when moving the shredder or if you do not
plan to use it for a long period of time.
• Do not shred wet paper, carbon paper, or vinyl or plastic bags.
Shredding these items may reduce the shredder’s performance or cause
shock or injury.
• Empty the wastebasket regularly to make sure that the paper slot does not
become blocked.
• Do not use garbage bags with the shredder. Garbage bags could prevent
the shredder wastebasket from being correctly mounted, which would
prevent the shredder from functioning correctly.
• Although our shredders are safe to shred the occasional circular paper clips
(#2 and 3), do not run industrial or non-standard (#4 and 8) clips through the
shredder.
Using the shredder
1 Slide the power button from OFF to AUTO.
2 Insert paper into the paper slot, or insert one credit card or one disc
(CD/DVD) into the disc slot. The shredder automatically shreds what you
insert.
Caution: Do not insert more than 10 pages, one credit card, or one disc at
a time. You may damage the shredder.
Specifications
Sheet capacity
Credit card capacity
Disc capacity
Paper shred size
Voltage
10 sheets of 20 lb. bond paper
One at a time
One at a time
0.12" × 0.35" (0.3 cm × 0.9 cm) pieces
120V ~ 60 Hz 3.2A
IM
MAX UM
10
SH S
EET
WARNING
Troubleshooting
• If a jam occurs and the cutter stops, slide the power button to REV and pull
out the jammed paper.
• If paper is jammed in the shredder blades, slide the power button to OFF,
unplug the power cord, and remove all paper from the entrance and exit of
the paper or disc slot.
• If the shredder runs continuously for a long period of time and the motor
overheats, a safety switch automatically turns off the shredder.
If this occurs, slide the power button to OFF and do not use the shredder for
50 minutes.
Maintenance
Once a month, drizzle vegetable oil or cooking oil (nothing petroleum based)
on a few pieces of paper and feed them through the shredder.
Shredder is
not intended
for use by
children
Do not insert
fingers into
the paper slot
or the optical
disc slot
Avoid getting
loose clothing
or jewelry
near the paper
slot or the
optical disc
slot
Do not spray
or keep any
aerosol
products in
or around
the shredder
Avoid getting
hair near the
paper slot or
the optical
disc slot
Do not put
industrial or
non-standard
circular paper
clips in the
shredder
Do not insert
more than
ten pages
One-year limited warranty
Visit www.dynexproducts.com for details.
Contact Dynex:
For customer service, please call 1-800-305-2204
www.dynexproducts.com
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN USA 55423-3645
© 2012 BBY Solutions, Inc., All Rights Reserved. DYNEX is a trademark of BBY Solutions, Inc.
Registered in some countries. All other products and brand names are trademarks of their
respective owners.
UPC: 600603151101
ENGLISH 12-0834