Download Dell Thin Client Solutions Administration Manual

Transcript
How to Clone Terminal Settings
1
From the Terminals inventory table, left-click to select the terminal and
then right-click to bring up the Context Menu. Select Terminal
SettingsClone from Terminal.
2
The details pane on the right-hand side will display a form with two
sections: Name and Details and Select Modules to Clone.

Name-Enter a name for this clone. This name will be the name that
Echo refers to for these settings in the future.

Description-Enter a short description for this clone.

Terminal Settings Modules-Select the type of settings you would like
to clone. You can select as many options as there are in the dropdown
menu and the selected modules will appear in a list below.
3
Click the Submit button. After a few seconds you will receive a success
message.
4
Open the Terminal Settings tab on the left-hand side. The settings you
just cloned should be listed in the inventory table now.
Terminal Management | 37