1
Download Dell Force10 Command Line Reference Guide
Transcript
conflict A.B.C.D server statistics snooping binding option option option option option option usage: usage: usage: usage: usage: usage: clear ip fib command usage:4 clear ip route Dell# command usage:1 0 0 0 0 0 0 show cpu-traffic-stats View the CPU traffic statistics. Syntax Parameters show cpu-traffic-stats [port number | all] port number (OPTIONAL) Enter the port number to display traffic statistics on that port only. The range is from 1 to 1568. all (OPTIONAL) Enter the keyword all to display traffic statistics on all the interfaces receiving traffic, sorted based on the traffic. Defaults all Command Modes EXEC Command History Usage Information Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module. Traffic statistics are sorted on a per-interface basis; the interface receiving the most traffic is displayed first. All CPU and port information is displayed unless a specific port or CPU is specified. Traffic information is displayed for router ports only; not for management interfaces. The traffic statistics are collected only after the debug cpu-traffic-stats command is executed; not from the system bootup. NOTE: After debugging is complete, use the no debug cpu-trafficstats command to shut off traffic statistics collection. Example Control and Monitoring Dell#show cpu-traffic-stats Processor : CP -------------Received 100% traffic on TenGigabitEthernet 8/2 Total packets:100 LLC:0, SNAP:0, IP:100, ARP:0, other:0 Unicast:100, Multicast:0, Broadcast:0 Dell# 103
