1
Download Dell Brocade 5300 Messages Reference Guide
Transcript
5 TS-1006 TS-1006 Message <message>. Message Type LOG Severity INFO Probable Cause Recommended Action Indicates that a time service event is occurring or has failed. The message can be one of the following: • • Init failed. Time Service exiting - Initialization error, but the time server exits. • Validating time update - Usually logged during temporary operational issues when a time update packet cannot be validated in a secure fabric. For example, during fabric reconfiguration or role change of the primary FCS switch. If the message does not recur, it can be ignored. Synchronizing time of day clock - Usually logged during temporary operational issues when the clock goes out of synchronization. For example, when a time update packet is missed due to fabric reconfiguration or role change of the principal or primary fabric configuration server (FCS) switch. If the message does not recur, it can be ignored. No action is required. TS-1007 Message Message Type Severity <message>. LOG WARNING Probable Cause Indicates that a switch is trying to set the clock server, which is not the primary fabric configuration server (FCS) across the fabric. A consistent FCS policy must be implemented across the fabric. Recommended Action Execute the secPolicyShow command to verify that the FCS policy is consistent across the fabric. TS-1008 Message Message Type Severity Probable Cause 866 <New clock server used> Clock Server used instead of <Old server configured>. LOG WARNING Indicates that the source of fabric time synchronization distributed from the principal or primary fabric configuration server (FCS) switch was changed to another configured clock server. This happens when the Network Time Protocol (NTP) query to the current active external clock server failed. Fabric OS Message Reference 53-1002749-01
