1
Download Dell Brocade 5300 Messages Reference Guide
Transcript
FABR-1045 5 FABR-1045 Message Message Type Severity Detected Base Switch conflict with remote (not neighbor) switch <Switchname> (domain <Domain ID>), BS <Base Switch Mode>. No local E_Ports disabled. LOG ERROR Probable Cause Indicates that the remote switch has a Base Switch attribute conflict with the local switch. But no ports are disabled because the remote switch is not an adjacent to the local switch. Recommended Action Make sure that all the switches in the fabric have the same Base Switch attribute or disable VF mode for the conflicting switch using the fosConfig command. FABR-1046 Message Message Type Severity Detected Base Switch conflict with neighbor switch <Switchname> (domain <Domain ID>), BS <Base Switch Mode>. E_Ports (<Number of E_Ports disabled>) connected to the switch are disabled. LOG ERROR Probable Cause Indicates that the remote switch has a Base Switch attribute conflict with the local switch. All the E_Ports directly connected to the conflicting switch are disabled. Recommended Action Make sure that all the switches in the fabric have the same Base Switch attribute or upgrade the switch firmware to a VF-capable firmware. FABR-1047 Message Area unavailable to assign to the port. Persistently disabling port <Port that is being disabled>. Message Type LOG Severity INFO Probable Cause Indicates that there are no areas available to assign to the port during port creation. Recommended Action Move some ports out of the default switch to make areas available. Fabric OS Message Reference 53-1002749-01 317
