Transcript
TM INSTALLATION INSTRUCTIONS IMPORTANT: Read carefully before installing fixture. Retain for future reference. VISION WALL VWS/EM 2/17/04 IMI-434 WARNING: Make certain power is OFF before starting installation or attempting any maintenance. Embedded Mounting Kit 1. The embedded mounting kit is intended for use when it is desirable to cast the mounting bracket into a poured wall. For orientation of the fixture to the junction box, See Fig. 1. 2. Make sure all power is off. 3. Pull the power supply wires through the junction box and through the center hole of the embeddment plate, leaving 6" for connections. 9.47 4. Using the two (2) screws supplied with the junction box, attach the plate to the junction box, with gaskets and studs facing away from the wall. (See Fig. 2) 4.09 5. Position the assembly in the wall as desired. Fig. 1 Fig. 2 These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please contact your nearest representative. Customer First Center • 1121 Hwy 74 South • Peachtree City, GA 30269 IMI-434 AVU040293