Download Canon imagePRESS C6000 Specification Sheet
Transcript
Two-Knife Booklet Trimmer-A1 Create full-bleed, saddle-stitched booklets in-line on your Canon imagePRESS C7000VP/C6000VP/C6000. Canon addresses a top request of the print marketplace with the introduction of the Two-Knife Booklet Trimmer-A1. The accessory is designed for the on-demand market where quality expectations are growing, but turnaround time is shrinking. Value-added services, such as in-line finishing, can enhance a printed product and provide additional opportunity to generate revenue. The Two-Knife Booklet Trimmer-A1 integrates seamlessly with the Booklet Trimmer-C1 and the Saddle Finisher-AB2 to enable three-sided trimming of full-bleed, saddle-stitched booklets. The capabilities of this finishing accessory will allow your business to completely produce and finish a greater variety of jobs in-line, without operator intervention. By shortening the time it takes to produce and finish the job in-house, you can meet the tightest deadlines requested by your customers. Available on a majority of the imagePRESS digital presses, this accessory eliminates the need for costly off-line finishing equipment and offers a solution to grow your business. Current imagePRESS digital press owners utilizing the face trimming ability of the Booklet Trimmer-C1 will be able to upgrade to three-sided trimming with this accessory. Specifications Two-Knife Booklet Trimmer-A1 Paper Size: LTR-R, 11" x 17", LGL, 12" x 18" Number of Sheets: 20 Sheets/80 Pages (Up to 80gsm/ 20 lb. Bond) 15 Sheets/60 Pages (More than 80gsm, up to 105gsm/28 lb. Bond) 10 Sheets/40 Pages (More than 105gsm, up to 128gsm/32 lb. Bond) 5 Sheets/20 Pages (More than 128gsm, up to 216gsm/80 lb. Cover) (Note: Only one sheet of cover can be used up to 300gsm/110 lb. Cover) Acceptable Paper Weights: 17 lb. Bond-110 lb. Cover (64gsm-300gsm) Trimming Width: 2mm-15mm (0.08"-0.59") (Each width of top and bottom edge) Minimum width of book in top and bottom direction; 190mm (7.48") Waste Tray Capacity: Approximately 1,500 sheets of 15mm/0.59" width trimmed piece Conveyer Tray Capacity: 30 Booklets (LTR, 20 sheets/80 pages, 80gsm/20 lb. Bond) Conveyer Tray for the Booklet Trimmer-C1 is attached to the Two-Knife Booklet Trimmer-A1. Electric Power Requirement: 120V, 60Hz, 4A (Power consumption is not to exceed 440w) Dimensions (H x W x D): 40.9"(H) x 21.1"(W) x 30.3"(D) (1040mm x 536mm x 770mm) Does not include dimension of Conveyer Tray It will add 21.1" (536mm) in width when it is connected to Booklet Trimmer-C1. Weight: Approximately 322 lb. (145kg) As part of the imagePRESS finishing solutions, the Two-Knife Booklet Trimmer-A1 will help you enhance internal productivity and the competitiveness of your production printing business. *Front cover photo includes the Booklet Trimmer-C1 with the Two-Knife Booklet Trimmer-A1. 1-800-OK-CANON www.usa.canon.com CANON and IMAGEPRESS are registered trademarks of Canon Inc. in the United States and may also be registered trademarks or trademarks in other countries. IMAGEANYWARE is a trademark of Canon. All other referenced product names and marks are trademarks of their respective owners and are hereby acknowledged. Specifications and availability subject to change without notice. ©2008 Canon U.S.A., Inc. All rights reserved. 1008-iPTKT-PDF-IS printed on recycled paper in the u.s.a. Canon U.S.A., Inc. One Canon Plaza Lake Success, NY 11042