Download Cabletron Systems 2H22 User's Manual

VLAN Redirect Configuration Screen
Frame Format (Read-Only)
Displays the current frame format setting: RECEIVED, TAGGED or
UNTAGGED. The default is RECEIVED.
•
RECEIVED – Frames are redirected in the format that they were
received by the SmartSwitch device.
•
TAGGED – Frames are transmitted on the destination port with a
VLAN tag inserted according to the frame classification of the
receiving port.
•
UNTAGGED – Frames are transmitted on the destination port without
a VLAN tag regardless of the format of the received frame.
Redirect Errors
Unsupported.
Source VLAN [n] (Modifiable)
Used to enter the VLAN ID of the VLAN that is to be changed to a source
VLAN. If a VLAN is currently being redirected, it will not display as a
selectable VLAN. For details, refer to Section 1.11.1.
Destination Port [n] (Selectable)
Used to select the port number that is to be changed to a destination port.
If a port is currently being redirected, it will not display as a selectable
port. For details, refer to Section 1.11.1.
Frame Format (Selectable)
Used to select the frame format for the transmission of redirected frames
on the destination port. RECEIVED, TAGGED, or UNTAGGED may be
selected. Refer to the previously described read-only Frame Format field
for details about each format. The default setting is RECEIVED.
Redirect Errors
Unsupported.
Status (Toggle)
Used to add or delete source and destination ports selected in the Source
VLAN [n] and Destination Port [n] fields.
Local Management Supplement
1-33