Transcript
Flare Busters Ceramic Flavor Enhancer DPA116 - FOR USE WITH ALL P3 SERIES GRILLS DPA117 - FOR USE WITH ALL P4 SERIES GRILLS USAGE, INSTALLATION, AND CLEANING INSTRUCTIONS USAGE As an alternative to lava rocks or similar heat-capturing briquets, Flare Busters may be used to produce delicious smoke flavor in any brand of gas grill. INSTALLATION Individually place the Flare Busters ceramic in a single layer evenly on your grill’s briquet rack. A single layer of Flare Busters is all that’s needed. DO NOT overlap or stack the ceramics. Before cooking, always preheat the grill as directed by the grill’s operating instructions. Hot ceramic causes better, quicker cooking and better flavor. CLEANING Routine preheating and routine burn-off (also called post-heating) of a grill will clean the Flare Busters ceramic. Periodically turn the ceramic over when they are cool to allow the flame to clean the ceramic the next time the grill is used. Flare Buster Ceramic Layout for P3 Series Grills Flare Buster Ceramic Layout for P4 Series Grills BROILMASTER® A Division of Empire Comfort Systems, Inc. 918 Freeburg Ave. Belleville, Illinois 62220 Visit our web site at www.broilmaster.com If you have a general question about our products, please e-mail us at [email protected]. If you have a service or repair question, please contact your dealer. B101532-0-0111 Page 1