Download Avaya Cable User's Manual

Cable Guide
The following sections include
•
Cable illustrations with the Bay Networks connector on the left and the
remote connector on the right
•
Cable length information
If you want to build a cable, and you want to determine the maximum cable
length appropriate for that interconnection requirement, you should
-- Identify in this chapter a cable that satisfies your interconnection
requirement (with the exception of total cable length)
-- Consult the networking industry specification, standard, or
recommendation designated in the “Industry Interface Type” entry for
that cable (located immediately following the cable pinout diagram)
•
Pinouts for each connector and all associated signals
•
Internal wire connections for each termination (when applicable)
For example, the console port to ASCII terminal cable (Order No. 7525) lists
internal wire connections such as “Pin 6 > 20” in the Remote Termination
column. This indicates that you must connect pin 6 to pin 20 inside the remote
termination.
•
2-2
Grounding arrangements that isolate the chassis from the DC ground within
the cable (when applicable)
114072-A Rev. C