Download American Standard Savona Bidet 5089.052 User's Manual

SAVONA™ BIDET
VITREOUS CHINA
SAVONA™ BIDET
❑ 5089.024 For deck-mounted fitting (illustrated)
•Vitreous china
•Flushing rim and vertical cleansing spray
•Integral soap/sponge deck
•Design-matched to Savona toilets
•Integral overflow
•Two bolt caps
Shown with 8391.000 Amarilis Bidet fitting with
Lexington Handles 0000.902 (not included)
❑ 5089.052 For over-the-rim fitting
•Vitreous china
•Punched for single hole, over-the-rim fitting,
less flushing rim and spray
•Integral soap/sponge deck
•Design-matched to Savona toilets
•Integral overflow
•Two bolt caps
Nominal Dimensions:
660 x 387 x 394mm
(26" x 15-1/4" x 15-1/2")
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
Compliance Certifications Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures
To Be Specified:
❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Silver
❏ Fawn Beige ❏ Black
❏ Bidet Fitting*:
❏ Fitting Finish:
❏ Trap:
❏ Supplies with Stops:
* See faucet section for additional models available
© 2008 AS America Inc.
K3
Revised 2/08
SAVONA™ BIDET
VITREOUS CHINA
5089.024
5089.052
For Deck-Mounted Fitting Variation
For Over-the-Rim Fitting Variation
203mm
(8)
FOOT OUTLINE
273mm
(10-3/4)
235mm
(9-1/4)
387mm
FOOT
(15-1/4)
159mm
(6-1/4)
89mm
(3-1/2)
19mm
(3/4)
SPRAY
102mm
(4)
660mm
(26)
C/L OF OFFSET
WASTE
1-3/4 DIA.
DRAIN
OUTLET
273mm
(10-3/4)
235mm
(9-1/4)
387mm
FOOT
(15-1/4)
29mm
(1-1/8)
29mm
(1-1/8)
C/L OF 3/8 HOT AND
COLD SUPPLY INLETS
400mm
(15-3/4)
FINISHED
WALL
246mm
(9-3/4)
25mm
(1)
197mm
(7-3/4)
660mm
(26)
FINISHED
WALL
246mm
(9-3/4)
25mm
(1)
108mm
(4-1/4)
178mm
(7)
178mm
(7)
3/8 FLEX C.W.T. SUPPLY
FROM FITTING
COUPLING NUT
ON FITTING
"A"
394mm
(15-1/2)
"A"
394mm
(15-1/2)
SPRAY HOLE
"A"
286mm
(11-1/4)
1-1/4 O.D. TAILPIECE
483mm
(19)
C/L OF (2) 10mm (3/8) DIA.
MOUNTING HOLES ON 7" CENTERS
1-1/4 O.D. TAILPIECE (THRU FLOOR
TRAPPING ONLY)
127mm
(5)
29mm (1-1/8) OFFSET OF WASTE OUTLET
102mm
(4)
C/L OF BIDET
1-1/4 O.D. TAILPIECE
FINISHED
FLOOR
483mm
(19)
C/L OF (2) 10mm (3/8) DIA.
MOUNTING HOLES ON 7" CENTERS
1-1/4 O.D. TAILPIECE (THRU FLOOR
TRAPPING ONLY)
127mm
(5)
102mm
(4)
3/8 N.P.T.
*SUPPLIES
1-1/4 O.D. WASTE OUTLET
"A"
286mm
(11-1/4)
102mm
(4)
FINISHED
FLOOR
FINISHED
FLOOR
76mm
(3) MIN.
C/L OF OFFSET
WASTE
102mm
(4)
216mm
(8-1/2)
108mm
(4-1/4)
FOOT OUTLINE
1-3/4 DIA.
DRAIN
OUTLET
381mm
(15)
140mm
(5-1/2)
76mm
(3) MIN.
38mm
(1-1/2)
130mm
(5-1/8)
FINISHED
FLOOR
162mm
(6-3/8)
102mm
(4)
3/8 N.P.T.
*SUPPLIES
1-1/4 O.D. WASTE OUTLET
29mm (1-1/8) OFFSET OF WASTE OUTLET
C/L OF BIDET
130mm
(5-1/8)
178mm
(7)
VIEW "A" - "A" (WALL OUTLET DETAIL)
VIEW "A" - "A" (WALL OUTLET DETAIL)
NOTES:
3/8 N.P.T. x 3/8 O.D. COMP. SUPPLIES, LESS VERTICAL RISERS
*(SUPPLIED
BY OTHERS).
3/8 N.P.T. x 3/8 O.D. COMP. SUPPLIES, LESS VERTICAL RISERS
*(SUPPLIED
BY OTHERS).
THIS INSTALLATION REQUIRES A TRUE 1-1/4" BODIED “P” TRAP, A
UNIVERSAL 1-1/4--1-1/2 IS NOT APPLICABLE.
THIS INSTALLATION REQUIRES A TRUE 1-1/4" BODIED “P” TRAP, A
UNIVERSAL 1-1/4--1-1/2 IS NOT APPLICABLE.
▲ WALL OUTLET INSTALLATION. DRAIN TAILPIECE MUST BE CUT
▲ WALL OUTLET INSTALLATION. DRAIN TAILPIECE MUST BE CUT
TO 1-5/8 LG.
NOTES:
TO 1-5/8 LG.
▼ DIMENSIONS SHOWN FOR LOCATION OF “P” TRAP ARE SUGGESTED. ▼ DIMENSIONS SHOWN FOR LOCATION OF “P” TRAP ARE SUGGESTED.
■ THRU FLOOR OUTLET INSTALLATION.
■ THRU FLOOR OUTLET INSTALLATION.
“P” TRAP AND FITTINGS NOT FURNISHED WITH BIDET AND
MUST BE ORDERED SEPARATELY. BIDET FITTING HAS TRANSFER
VALVE FEATURE.
“P” TRAP AND FITTINGS NOT FURNISHED WITH BIDET AND
MUST BE ORDERED SEPARATELY. BIDET FITTING HAS TRANSFER
VALVE FEATURE.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided leaflet.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided leaflet.
© 2008 AS America Inc.
K4