Transcript
HERITAGE™ COUNTERTOP SINK VITREOUS CHINA BARRIER FREE HERITAGE™ COUNTERTOP SINK • Large, oval drop-in sink made from vitreous china • Self-rimming with cutout template supplied • Dual front overflow • Large deck area (faucet not included) ❏ 0456.017 Faucet holes on 8" (203mm) centers (illustrated) ❏ 0456.013 Center hole only Nominal Dimensions: 660 x 495mm (26" x 19-1/2") Bowl sizes: 457mm (18") wide 305mm (12") front to back 152mm (6") deep Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2M for Vitreous China Fixtures 203mm (8) FINISHED WALL OR SPLASH BACK (3) 35mm(1-3/8) DIA. HOLES OPTIONAL 76mm(3) 191mm (7-1/2) 495mm (19-1/2) To Be Specified: ❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Faucet*: ❏ Faucet Finish: ❏ Supplies: ❏ 1-1/4" Trap: 16mm (5/8) 660mm (26) SEALING COMPOUND COUNTERTOP (BY OTHERS) * See faucet section for additional models available * 279mm 197mm (7-3/4) 178mm (7) 787mm (31) SUGGESTED (11) 102mm (4) 102mm (4) SUPPLIES *343mm AS REQUIRED (13-1/2) 1-1/4 O.D. WASTE OUTLET FINISHED FLOOR 1-1/4 O.D. TAILPIECE NOTES: DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE *SUGGESTED. FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE TEMPLATE SUPPLIED WITH SINK. FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. SEALING COMPOUND SUPPLIED BY OTHERS. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. © 2008 AS America Inc. J23 Revised 2/08
