Transcript
TOWN SQUARE® COUNTERTOP SINK FIRECLAY BARRIER FREE TOWN SQUARE® COUNTERTOP SINK • American classic design • Clean, straight lines with classic ogee curves • Tapered interior bowl with flat bottom design provides dramatic look • Made from fine fireclay • Self-rimming with cutout template supplied • Front overflow ❏ 0700.004 Faucet holes on 4" (203mm) centers (illustrated) ❏ 0700.008 Faucet holes on 8" (102mm) centers ❏ 0700.001 Center hole only Nominal Dimensions: 23-1/8" x 18-3/4" (587 x 476mm) FINISHED WALL OR SPLASHBACK Bowl sizes: 18-1/2" (470mm) wide 10-1/2" (267mm) front to back 6-1/4" (159mm) deep Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.9M for Non-Vitreous Ceramic Fixtures • CAN/CSA B45 series To Be Specified: ❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Black ❏ Town Square Faucet: ❏ Centerset Sink Faucet: 2555.201 (shown) ❏ Widespread Sink Faucet: 2555.801 ❏ Other Sink Faucet*: ❏ Faucet Finish: ❏ Supplies: ❏ 1-1/4" Trap: 4" (102mm) OPTIONAL 2-7/8" (73mm) 9-3/4" (248mm) 18-3/4" (476mm) 1-3/4" DIA. STD. DRAIN OUTLET 23-1/8" (587mm) SEALING COMPOUND 1" (25mm) COUNTERTOP (BY OTHERS) 8-1/8" (206mm) *10-3/4" (273mm) 12-7/8" * (327mm) SUPPLIES AS REQ'D 8" (203mm) 1-1/4" O.D. WASTE 31" (787mm) SUGGESTED 1-1/4" O.D. TAILPIECE * See faucet section for additional models available FINISHED FLOOR NOTES: DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP *ARE SUGGESTED. FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE TEMPLATE SUPPLIED WITH SINK. FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. SEALING COMPOUND SUPPLIED BY OTHERS. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.9M. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. © 2008 AS America Inc. J27 Revised 2/08
