Transcript
ACCLIVITY™ COUNTERTOP SINK AMERICAST® BRAND ENGINEERED MATERIAL ACCLIVITY™ COUNTERTOP SINK Americast ® Brand Engineered Material • Acid-resistant porcelain finish • Large bowl area • Self-rimming with cutout template supplied • Chrome overflow trim ring • Shown with lavatory faucet (not included) ❏ 3409.001 Center hole only ❏ 3409.403 Faucet holes on 4" (102mm) centers (illustrated) ❏ 3409.803 Faucet holes on 8" (203mm) centers Nominal Dimensions: 483mm dia. (19") Round Bowl sizes: 368mm (14-1/2") wide 302mm (11-7/8") front to back 178mm (7") deep 102mm (4) FINISHED WALL OR SPLASHBACK OPTIONAL 79mm (3-1/8) Americast ® Brand engineered material is a composition of porcelain bonded to enameling grade metal, bonded to a patented structural composite. 241mm (9-1/2) Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.4M for Americast Plumbing Fixtures • ASTM E162 for Flammability • NFPA 258 for Smoke Density C/L 483mm (19) 10mm (3/8) SEALING COMPOUND To Be Specified: ❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Silver ❏ Fawn Beige ❏ Black ❏ Faucet*: ❏ Faucet Finish: ❏ Optional Trim Ring for Overflow: 790730-101 Polished Brass ❏ Supplies: ❏ Trap: * See faucet section for additional models available 210mm (8-1/4) * 356mm * 260mm (14) (10-1/4) SUPPLIES AS REQ'D COUNTERTOP (BY OTHERS) 203mm (8) 178mm (7) 787mm (31) SUGGESTED 1-1/4 O.D. WASTE 1-1/4 O.D. TAILPIECE FINISHED FLOOR NOTES: DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE *SUGGESTED. FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE TEMPLATE SUPPLIED WITH SINK. FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. SEALING COMPOUND SUPPLIED BY OTHERS. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.4. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet. © 2008 AS America Inc. J57 Revised 2/08
